You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

Introduction

The N610 supports

  • Up to 6 repeaters in star arrangement
  • Connection is unencrypted
  • 2 narrowband calls in extended DECT range
  • Activation via provisioning

Planned is:

  • Web-interface setting
  • encrypted connection

N670 and N870 do not support repeaters, for the N670/N870 (mini) multi-cell is available. 

Auto-provisioning

(warning) DO NOT apply following provisioning file to any Nx70.

Following provisioning file does apply RPN=1 to all base stations of a single cell system, so to the one and only local base.

Wildcard provisioning does not automatically synchronize settings for all 'ConfirmedBaseStations'!

Reboot is needed after successful provisioning to get this synchronized.


Provisioning template
<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">
    <nvm>
  <!-- Provisioning file for N610:
        deactivate enhanced DECT settings,
        that are not supported by a transparent repeater -->
  
        <!-- Since V2.50.0 defaults local base of ARI-Class A (N610) to 0,-->
        <!-- repeater-support needs to swap RPN of local base to 1!-->
        <!-- ATTENTION: DO NOT apply this provsioinig xml to Nx70 system!!!-->
    <param name="dm.local.LocalBaseRpn" value="1"/>
    
    <!-- The following  provisioning command could apply to 'all'base stations of cingle cell system,-->
    <!-- but MUST NOT apply to ALL base stations of Nx70 system,-->
    
    <!-- Wildcard provisioning is not immdediately synchronized to table of ConfirmedBaseStations!!! -->
    <!-- So please replace wildcard '@' by mac address of your N610, or reboot the base after successfull provisioning. -->
    <param name="ConfirmedBaseStations.@.ucRpnIndex" value="0x1" />
      
	    <!-- Encryption Off -->
        <param name="DmGlobal.0.DECTCipherDisable" value="1" />
		
	    <!-- enhanced Encryption Off , for consistency -->
        <param name="DmGlobal.0.DECTEnhancedEncryption" value="0" />

	    <!-- Cf 0=off=Base confirms to Cs, advanced bearer setup decision by handset not affected ;-( until Domino/0x87=On 8Segments-->
        <param name="DmGlobal.0.DECTCfSettings" value="0x00" />
		
	    <!-- DECTBlindslots 0x0aaa for even slots; 0x0fff for all slots -->
        <param name="DmGlobal.0.DECTBlindslots" value="0x0aaa" />
        
	    <!-- wideband off : handset needs 40s asynchronity (by reboot) to learn this!!! -->
        <param name="DmGlobal.0.WidebandEnabled" value="0" />
    </nvm>
</provisioning>

Examples of provisioning files

  File Modified


How to check in Web-UI and with handset MMI?

DECT Settings → DECT Encryption, early Encryption and re-keying is disabled to support transparent repeater operation.

Telephony → Audio → Wideband Support must stay decativated to support transparent repeater operation:


With handset you could check the RPN in the RFP-Scan procedure


If repeater support is deactivated RPN ends with '0' or '8'.

If repeater support is activated RPN ends with '1' or '9'.

Repeater might show up in RFP-scanning with RPN ending with '2..7' or 'a..f'.


PARI of Class A needed

Several handset implemented rules ( sometimes just tuning, sometimes hard requirements ),
need DECT PARI of class A ( starting with '0' ), to best interop with repeaters, expecially of the rather old generation.

Some very early samples were equipped with PARI of class B starting with '1'.

Please return such sample back to headquarter for replacement by correct sample.

  • No labels