N510 IP- Configure and use the roaming feature right.

The roaming means synchronization of a handset to one base with best signal which was registered
before in case that the previous DECT connection is loosing.

Requirements for the roaming:

The handsets have been registered to all bases before (max.4).
The option „Best Base“ has been activated in the settings menu of the handsets.
The handset has to be out of range from Base1 to start searching for Base2.

To be reachable every time:

To be reachable for external subscribers in all bases areas each handset (user) an own IP account
per base you have to assign. The IP Accounts have been assigned to the users in the PBX too.

Following just an example for 6 handsets and 2 bases:

6 hansets each registered on 2 bases	6 x IP Accounts to base 1	6 x IP Accounts to base 2	Internal phone number	external phone number
User 1 = Handset No. 1	Phone 1.1	Phone 2.1	11	111111
User 2 = Handset No. 2	Phone 1.2	Phone 2.2	22	222222
User 3 = Handset No. 3	Phone 1.3	Phone 2.3	33	333333
User 4 = Handset No. 4	Phone 1.4	Phone 2.4	44	444444
User 5 = Handset No. 5	Phone 1.5	Phone 2.5	55	555555
User 6 = Handset No. 6	Phone 1.6	Phone 2.6	66	666666

Page tree

Roaming feature on N510IP - How to configure

N510 IP- Configure and use the roaming feature right.