Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Current »

Introduction 

In this article I will explain how to use IPUI provisioning for N870 behind Broadsoft.

Challenge: Broadsoft has no IPUI field.

Broadsoft Line/Port number

Suggestion is to use the Broadsoft Line/Port field. This can be found at every user under Addresses.

In the above example, you can see that this user is using position 1 of the 250 in the N870 and is using the handset with IPUI number "029e74a599"

The second user is using position 2 and the handset with IPUI number "02b6ec8aa5"

Broadsoft placeholder

The Broadsoft placeholder for the Line/Port field is:

UserPlaceholder
1%BWLINEPORT-1%
2%BWLINEPORT-2%
.. x%BWLINEPORT-x%

Template example

<?xml version="1.0" encoding="UTF-8"?>
<gigaset>
<provisioning version="1.1" productID="e2">

<nvm>

<!-- Handset 1 -->

<oper value="%BWLINEPORT-1%" name="add_hs">

<param name="hs.RegStatus" value="ToReg"/>

</oper>

<param name="SipAccount.%BWLINEPORT-1%.AuthName" value="%BWAUTHUSER-1%" />
<param name="SipAccount.%BWLINEPORT-1%.AuthPassword" value="%BWAUTHPASSWORD-1%" />
<param name="SipAccount.%BWLINEPORT-1%.UserName" value="%BWLINEPORT-1%"" />
<param name="SipAccount.%BWLINEPORT-1%.DisplayName" value="%BWNAME-1%" />
<param name="SipAccount.%BWLINEPORT-1%.ProviderId" value="0" />
<param name="hs.%BWLINEPORT-1%.DirectAccessDir" value="0" />


<!-- Handset 2 -->

<oper value="%BWLINEPORT-2%" name="add_hs">

<param name="hs.RegStatus" value="ToReg"/>

</oper>

<param name="SipAccount.%BWLINEPORT-2%.AuthName" value="%BWAUTHUSER-2%" />
<param name="SipAccount.%BWLINEPORT-2%.AuthPassword" value="%BWAUTHPASSWORD-2%" />
<param name="SipAccount.%BWLINEPORT-2%.UserName" value="%BWLINEPORT-2%"" />
<param name="SipAccount.%BWLINEPORT-2%.DisplayName" value="%BWNAME-2%" />
<param name="SipAccount.%BWLINEPORT-2%.ProviderId" value="0" />
<param name="hs.%BWLINEPORT-2%.DirectAccessDir" value="0" />

<!-- VoIP Provider 1 settings -->
<param name="SipProvider.0.Name" value="Broadsoft"/>

<!-- General data of your service provider -->
<param name="SipProvider.0.Domain" value="%BWHOST-1%"/>
<param name="SipProvider.0.ProxyServerAddress" value="%BWHOST-1%"/>
<param name="SipProvider.0.ProxyServerPort" value="5060"/>
<param name="SipProvider.0.RegServerAddress" value="%BWHOST-1%"/>
<param name="SipProvider.0.RegServerPort" value="5060"/>
<param name="SipProvider.0.RegServerRefreshTimer" value="180"/>
<param name="SipProvider.0.TransportProtocol" value="1"/>
<param name="SipProvider.0.UseSIPS" value="0"/>
<param name="SipProvider.0.SRTP_Enabled" value="0"/>
<param name="SipProvider.0.AcceptNonSRTPCalls" value="0"/>


<!-- Redundancy -->
<param name="SipProvider.0.DnsQuery" value="0"/>


<!-- Failover Server -->
<param name="SipProvider.0.FailoverServerEnabled" value="0"/>
<param name="SipProvider.0.FailoverServerAddress" value=""/>
<param name="SipProvider.0.FailoverServerPort" value="5060"/>


<!-- Network data of your service provider -->
<param name="SipProvider.0.OutboundProxyMode" value="0"/>
<param name="SipProvider.0.OutboundProxyAddress" value="%SBC_ADDRESS%"/>
<param name="SipProvider.0.OutboundProxyPort" value="%SBC_PORT%"/>
<param name="SipProvider.0.MWISubscription" value="0"/>


</nvm>

</provisioning>

</gigaset>





  • No labels