Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Software 2.26.0, December 2019
  • Supported Languages: German / English / Spanish / French / Italian / Russian / Turkish / Netherlands / Portuguese

  • Save of Central phone-book is now possible

  • Distinctive ringing for internal, external, door station, group, emergency or user defined call types
  • Add capacity information to http (GET) user-agent header
  • Large and XXL systems are now released
  • N870 in Integrator mode only:
    • Up to 4 DECT Managers (With license)
    • Up to 800 DECT handsets
  • N870 Virtual Integrator is released
    • Up to 100 DECT Managers (With license)
    • Up to 20000 DECT handsets
  • DECT GAP handsets protection can be disabled
  • Improved DECT handset registration, up to 10 registrations in parallel can be done.
  • CSTA
    • CSTA session already active
    • CSTA transport protocol can be changed via the web-interface
    • SnapshotDeviceResponse answer is wrong
    • Switch the transport protocol without an reboot
    • Device reboots when using uaCSTA and receiving 2e incoming call
  • CNIP not updated on Transferee after transfer
  • Central phone-book
    • Can be downloaded via the web-interface
    • INT key can be assigned to Central phone-book
    • After provisioning phone-book is automatically downloaded
  • Web-interface:
    • Show Licensing page when used as Integrator only
    • Configure SIP registration behavior if mobile device is not connected/reachable
  • Caller-Id not updated after call transfer at OpenScape Business
  • Fix for CNIP with Cyrillic characters not displayed on DECT phone
  • HTTPS for Rap - fixes for nested absolute links
  • Get handset information via HTTP(s) get
  • Fail-over to secondary SBC (sip proxy)
  • Register request with Authorization Digest: QOP = "auth-int" or "auth-init"
  • Display handset during call transfer is very slow 
  • xHTML:
    • Incoming invite with auto-answer is not possible
    • Service doesn't work when credentials are empty
    • "&" Sign gives error message
  • Syslog
    • Add information if setting is changed
    • Add LDAP information
  • No CLIP update
  • LDAP detail view doesn't work on some entries
  • Auto-provisioning
    • Parameter "" should work without restart
    • Default ringtone can be changed via provisioning
    • Provisioning started via web-interface showed failed message but worked fine
  • Maximum length of REFER-TO header increased
  • Access code From incoming calls and from network together with Area code is not working
  • DTMF: No CRLF after the "Duration" line
Software 2.23.0, September 2019

Bug-fixes and improvements:

    • 3 party conference
    • DE-REGISTER SIP account when handset is switched of or out of range
    • DHCP option 66 (HTTP(s) provisioning URL)
    • DECT sync levels increased from 10 to 15
    • DHCP option 51 and 125
    • Auto-provisioning:

      • Parameters without IPUI, like: <param name="SipAccount..AuthName" value="" /> are ignored to speed-up provisioning when sending full provisioning templates with many empty handsets

      • UpdateDectManager procedure can cause that DECT manager can't connect to Integrator
      • Error message should not be shown due to errors in wrong configured parameters as other parameters are accepted
      • Direct link to provisioning file with extension.cfg via redirect is now possible
      • User-agent in HTTP get contains information about Maximum number of handsets allowed
      • Status-page: Direct links to the configuration pages
      • Mobile devices - administration: New icon in DECT column when handset is switched off or out of range (signalling out of range can take up to 3 hours)
      • After changing number of active base stations, Web-interface returns to base station synchronisation list
      • TCP/TLS port SIP destination port 10060 not working. 
    • Broadsoft
      • Improvement for DND, Call Forward Always, Busy and no Answer
      • Call Forward is splitted from one handset menu to 3 menu items
      • XSI phonebook, reverse lookup is now done based on the exact number
    • Central phonebook
      • Special characters not displayed correct
      • URL length increased to 254 characters
    • 3CX
      • Call transfer improvement.
      • CNIP update improvement.
    • LDAP(S) improvements
    • Improved overview if the DECT registration window is open or close
    • DNS failover improvement
    • Add factory reset option / role change when device is Manager + Base
    • N670 can be added to the Virtual Integrator
    • LDAP/XML/XSI phonebooks can be used during call transfer
    • Anonymous calls are not saved in Call Lists
    • NTP too low threshold for Root Dispersion.
    • xHTML "&" sign should not generate error
    • Reboot when ringing HS is switches off
    • uaCSTA, SnapshotDeviceResponse answer is wrong
    • Switching from SRTP to RTP during 1 call 
    • MWI counter update improvement
    • Crashed, when sip-user-id is longer that 19 characters (or uninitialised)
    • First improvements to support NAPTR is implemented. (Official supported in Next release)
Software 2.20, July 2019

Bug-fixes and improvements:

    • SIP options in SIP register header

    • Ghost handsets show display message to "Reset or to Register"

    • Updated German translations

    • Improvements for large systems

    • Improvements for LAN sync

Software 2.17, June 2019

Bug-fixes and improvements:

    • Use Phonebook key to assign to xHTML service

    • Phonebook lookup caching time
    • Performance enhancements for high load and large systems
    • Firmware update via HTTPS using client certificates
    • LAN synchronisation to better deal with weak jitter
    • Security improvement
    • LDAP username does not allow "=" character
    • Call logs that have "-" character inside the CLIP
Software 2.16.2, April 2019

Bug-fixes and improvements:

    • Status page, DECT base if it has "No sync" status will be visible.
    • N870 new role, Integrator only. With one external DECT manager.
    • Firmware update using HTTPS client certificates.
    • Auto provisioning using fixed numbering.
    • Central phonebook
    • Added new PKI Root Certificates
    • Handset export/import improvement.
    • SIP control termination fixed.
    • Provisioning: IPUI using capital letters.
    • Add time stamp to Incident.tar file.
    • CNIP string should utilize all available space on the display.
    • LDAP improvements.
    • Provisioning Improvements
    • Stability improvements
    • User-agent for software download matches the SIP user-agent
  • No labels