12Connect

Gigaset T300/T500 settings.

In the Gigaset PBX go to "Configuration" - "Lines" - "Lines" and click on: New Line

Provider settings:

Give the Line an unique name, insert the Registration user name and Password.

In the Provider pull-down list, select "new.."

Number Area settings:

Just add the telephone numbers for this SIP trunk. The Country Code and Area Code can be filled in, if different than the default setting.

Extended settings:

Open the Manual Configuration and change the default settings like in the example below. Do not forget to enable the check-box Active.

We use the manual configuration to change the Caller ID, where we add the + in front of the international number. This change causes that you call the persons back using the missed calls list.

You can copy the text below to paste into the field.

Software Release 5.2 or Higher

    [12Connect-incoming]
    exten => _.,1,Set(channelname=12Connect-incoming)
    exten => _.,2,Set(lineconfigid=1002)
    exten => _.,3,Set(CALLERID(num)=+${CALLERID(num)})
    exten => _.,4,Goto(12Connect-incoming-manuell,${EXTEN},1)

    
    [12Connect-incoming-manuell]
    exten => _X.,1,Goto(incoming,${EXTEN},1)
    exten => _+X.,1,Goto(incoming,${EXTEN},1) 

Software Release < 5.2

    [12Connect-incoming]
    exten => _X.,1,Set(channelname=12Connect-incoming)
    exten => _X.,2,Set(CALLERID(num)=+${CALLERID(num)})
    exten => _X.,3,Goto(incoming,${EXTEN},1)
    exten => _+X.,1,Set(channelname=12Connect-incoming)
    exten => _+X.,2,Goto(incoming,${EXTEN},1)