Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Protalk door intercom


Tested with:

Gigaset T300/T500 PRO: Software version

Protalk Slim IPDP 01C: VoIP version: 1.58 UDV version: 6.0

Create SIP account in Gigaset T300/T500

Go to: Configuration - Phones - Add additional Telephones

Protalk Phone.jpg

Use the settings like in the example above. Always use the Password generator to create a secure Password.

Configure the Protalk door intercom

 Protalk SIP.jpg

SIP proxy server and SIP registrar server = IP address of the Gigaset T300/T500.

Account module Name and Auth. ID = Telephone name in Gigaset T300/T500.

Password = Password in Gigaset T300/T500.

Protalk Number.jpg

Here you can define which number is dialled when the key is pressed, in this example number: 206.

Protalk audio.jpg

Please check if the correct codecs are enabled.

Gigaset User account.

Without a Gigaset user account, the door intercom can be used to dial an internal number. Incoming and Outgoing external calls are not possible.

Incoming calls to the door intercom are only possible when the door intercom is assigned to a user.

In the Gigaset T300/T500 Go to: Configuration - Users and create a new user, only to be used for the door intercom (user license)

Protalk User.jpg



Protalk picture.jpg

  • No labels