Introduction

In the Numbering->User Settings->Parallel Ringing you configure whether, in case of incoming calls to an internal number, there shall be parallel signalling to another external number.

You can use this feature to let your mobile device/home phone(homeworking) ring at the same time as your extension in the office. When answered, you can:

CodeDescription
*Put the call on hold in the Hybird 120

* extension number

Put the call on hold and call your colleague
In the inquiry call status:
DisconnectCall is transferred to your colleague.
*Back to held connection (call)

Log in/out mobile extension internally

ProcedureFunction

*61

Activate parallel ringing for this device/user
#61De-activate parallel ringing for this device/user

Log in/out mobile extension externally

  • Dial the external number of the system as configured for external telephone access in Numbering->Call Distribution->Incoming Distribution under Assignment.

  • If external access to your system is enabled in the GUI, you will hear the special dialing tone of your system. Switch your telephone to tone dialing

  • Enter PIN2
  • You hear the positive acknowledge tone.
  • Press the * key or the # key respectively (log in / log out).
  • Dial the code 61
  • You hear the positive acknowledge tone.
  • End the call

 

Info

A hold for enquiry is not allowed if the DTMF receiver cannot be switched on.


A DTMF receiver cannot be switched on, if:


• No PCM channel is linked to a direct IP-to-IP connection and an SIP provider.
• Telephone calls are not routed via the Codec G.711 on IP connections or the DTMF signalling is outband (for other Codecs DTMF recognition may not function correctly!).

 

 

 

 

  • No labels