Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Introduction

From software 2.38 it is possible to change the N870 network settings via auto-provisioning when the device has the role:

  • Integrator
  • Integrator + DM
  • Integrator + DM + Base


Auto-provisioning example

<?xml version="1.0" encoding="UTF-8"?>
<settings version="1.0" productID="e2">

<oper name="set_uci">

<!-- preferred and alternative DNS -->
<param name="network.lan.dns" value="84.116.46.21;84.116.46.20" />

<!-- Possible values are dhcp or static -->
<param name="network.lan.proto" value="static" />

<param name="network.lan.ipaddr" value="192.168.178.198" />
<param name="network.lan.netmask" value="255.255.255.0" />
<param name="network.lan.gateway" value="192.168.178.1" />

<!-- Possible values are: vlan = vlan is enabled or eth0 = vlan is disabled -->
<param name="network.lan.ifname" value="vlan" />
<param name="network.vlan.vid" value="6" />
<param name="network.vlan.prio" value="6" />

</oper>

</settings>

  • No labels