FAQ Nx70 - Connection via IP (Hidden)

To use the Nx70 behind an Cisco platform, there are 2 options:

1. As SIP device direct registered to Cisco
2. As SIP device via "anynode"
3. Via an SIP trunk

As SIP device direct registered to Cisco

It is not possible to use N870 behind Cisco connected as SIP device, due to the fact that Cisco wants to have for each SIP account an separate port, Gigaset Nx70 is using for each SIP account the same port.

Is also an expensive solution as for each DECT handset you need to buy an Cisco SIP device license.

As SIP device via "anynode"

Via an anynode SBC, you can register Nx70 to the anynode and anynode will register itself to cisco.

For this anynode knowledge is required including hardware and software.

Via SIP trunk

As this is an proven technology with N720, and from now possible with Nx70.

Via provisioning, you can configure the Nx70 to be used via an Cisco SIP trunk.

Advantage:

• No official Cisco certification needed
• No Cisco licenses
• Proven technology
• Easy to configure
• Better prized and higher quality Gigaset DECT system 

Telephony functionality:

• Calls between Cisco desktop phones and DECT handsets
• Call transfer
• Conference call is not supported