You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Use this menu option to manually activate and deactivate the mode configured in the "Alarm Configuration" menu and selected in the "Operating Mode" menu. Depending on this, the menu option in Basic Mode will be called "BM Activation", in Alarm Mode "AM Activation" or in
PNG Mode "PNG Activation".

When Alarm Mode and PNG Mode are activated, a sensor test is performed first in each case. Only the sensors that are activated in the respective mode are checked. It is only if the test has been concluded successfully that the corresponding Alarm Mode is active.

Manual activation is only possible if this has been activated for the corresponding operating mode. It is also possible to configure automatic activation.

See Section 3.2.1.2, "[Mode] Activation".

If one of the operating modes is active, the MWI LED flashes green.

Procedure:

When the display is idle, press the center key three times (central key on the control key) to activate/deactivate.

Alternatively:

  1. Select the Additional Features icon in the main menu.
  2. Select [Mode] Activation.


In monitoring mode: Do not remove the battery pack! Removal of the battery pack will result in a technical alarm being triggered in the HNA.

  • No labels