You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

A complete check and adjustment of the alarm sensors is performed in this menu.

When Alarm Mode and PNG Mode are activated, the sensors for the activated alarms are checked, with the check being started automatically when the mode is activated. No sensor check is started automatically in Basic Mode by activating the mode.

Procedure:

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Adjust Sensor.
  6. Keep the handset still in a vertical position and confirm with OK.
  7. Shake the handset vigorously until the test is successful.
  8. Keep the handset still in a vertical position until the test is successful.
  9. Press the red alarm key at the top of the handset.
  10. Remove the connector with the pull cord from the socket at the lower end of the handset and insert it again.


If the function test fails repeatedly, shut down the phone immediately and send it to the manufacturer.



  • No labels