You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Display mode settings

  1. Press and select Preferences.
  2. Select Display and press .
  3. If any expansion modules are connected to the phone, use / to select Primary display and press .

  4. Use the navigation key  / to select SmartLabel options and press .

Fig. 1

Fig. 2


5. Select Idle Screen Behavior, Call Screen Behavior, or Other Screen Behavior and press . The default settings are indicated in bold italic in the table. The available options for the three different screens are:



Idle screenCall screensOther screens
Default display modeOffOff-
ShortShort-
Full--

Alternative display mode

ShortShort-
FullFull-

Alternative mode trigger

OffOffOff
Short-press P4Short-press P4Short-press P4
Long-press P4Long-press P4Long-press P4


6.  The configuration of the settings for all screens and other screens is done the same way.

Default and alternative display mode.
a. Select the display mode you want to change, for example the default mode (Fig. 3), and press . In the following example, the default mode is set to Full (Fig. 3 and 4), and we want to change it to Short.

Fig. 3                                            Fig. 4                                             Fig. 5                                           Fig. 6


b. Use the navigation key / to select Short (Fig. 5) and press to save and return to the Screen Behavior menu where the line underneath Default display mode now reads Short (Fig.6).

Alternative mode trigger. Use the navigation key / to select Alternative display trigger and press . The default is Long-press P4, as indicated by the radio button .


Fig. 7

c. Use the navigation key / to select another trigger.

d. Press to save and return to the Screen Behavior menu.

7. Press to return to the SmartLabel options menu (Fig. 2).


Timer setting for returning display mode to default

1. Press -> Preferences -> Display -> Primary display (if there is at least one connected expansion module) -> SmartLabel options.

2. Select the Return to default mode timer (Fig. 8) and press . The preset default is 3 seconds.

Fig. 8


3. Enter a different number of seconds between 0 and 360 on the alphanumeric keypad and press to save and return to the SmartLabel options menu. The timer now shows the new setting.

Note: If you enter 0 seconds, the display will not return to the default mode automatically.

  • No labels