You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

UnPacking the Handset

Assembling the DECT Handset

 

Mounting the Cradle

The handset can be installed at the left side or the right side of the device. A

The cradle is attached to the device with the 2 delivered screws and the following tool is needed.

Registering the handset (DECT)

Set Maxwell 10 in DECT registration mode

On the Start screen tap on to open the list of available apps. Select Settings.

Select DECT -> Tap on Register DECT Handset

Activate DECT handset in registration mode.

  • Turn the handset off using the Disconnect button
  • Press the volume down key and keep it pressed, turn the handset on using the Disconnect button while keeping the volume down pressed.
  • You will hear the handset registration sound.

 

The registration process may take some time. if the registration is successful then a message is output.

 

 

  • No labels