Valid for:

N610

N670

N870

N870E

Embedded Integrator

Virtual Integrator

Introduction

From software 2.62 or higher, you can assign the incoming/outgoing line via the handset connected to the N610.

Only possible when Internal telephony is enabled.

In order to be able to make calls with your telephone over the Internet, you must configure at least one VoIP connection on your telephone. You can configure VoIP connections using the following methods:

Via the connected Gigaset handset menu

  • Open the handset menu (control key) → Select Services
  • Press down on the control key to scroll through the list.
  • Press the display key OK if you wish to change the Send Connection setting.
  • Press the display key OK if you wish to change the Rec. Connections setting.

Send Connection

The list of receive connections currently assigned is displayed.

  • Press down on the control key to scroll through the list if necessary.
  • Press the display key Select if you wish to change the receive connection setting.
  • Press the display key Save if you wish to save the setting. 

Rec. Connection

The send connection currently set for the handset is displayed.

  • Press down on the control key to scroll through the list if necessary.
  • Press the display key Select if you wish to change the send connection setting.
  • Press the display key Save if you wish to save the setting. 

  • No labels