Introduction

Call forwarding (or call diverting), is a feature that allows an incoming call to a called party, which would be otherwise unavailable, to be redirected to a mobile telephone or other telephone number where the desired called party is situated.Normally the system sends the CLIP information from the called party to the phone where the call is redirected to.When using A number forwarding, the system sends the CLIP information from the incoming call to the phone where the call is redirected to. The called party will directly see who is calling and can respond accordingly.

To enable A number forwarding in your Hybird 120 GE, you need to activate the feature.

ISDN settings

In the web-interface of the Hybird 120 go to:

• Numbering - Trunk Settings - Trunks
• Select the ISDN line
• Change Outgoing Signalisation to: Individual CLIP no Screening Number
• Enable the feature Signal remote caller number

SIP trunk settings

In the web-interface of the Hybird 120 go to:

• VoIP - Settings - SIP Provider
• Select the SIP trunk
• Change Outgoing Signalisation to: Individual CLIP no Screening Number
• Enable the feature Signal remote caller number