You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

Introduction

Under system settings you can find different parameters that can be changed by the administrator to change the behaviour of the system.

 

  • Add devices automatically
  • Call log lifetime
  • Network whitelist
  • Polycom phone models
  • Gigaset phone models
  • Polycom provisioning
  • Polycom user name
  • Polycom password
  • Gigaset auto provisioning
  • DE… user password
  • DE… admin password
  • Firmware update DE… devices
  • DE310 firmware version
  • DE410 firmware version
  • DE700 firmware version
  • DE900 firmware version
  • Firmware update N510
  • Firmware update N720
  • N510 firmware version
  • N720 firmware version
  • N510 system PIN
  • N720 password
  • Disable DE… TFTP firmware update
  • Firmware update Maxwell 10
  • Maxwell 10 firmware version
  • Media gateway debug
  • Media gateway debug port
  • Media gateway syslog
  • Media gateway syslog server
  • Maximum ringing time (s)
  • Override call-forward
  • Reverse phone book search
  • Initiate call network whitelist
  • Call completion to busy subscriber
  • Call completion timeout
  • Call back failed call transfer
  • Destination for failed call transfers
  • Operator extension
  • Call forward timeout to operator
  • User select caller ID
  • Queue calls in call lists
  • Internal extension voicemail
  • External number voicemail
  • PIN code voicemail
  • FAX
  • Fax box prefix
  • TSI prefix
  • TSI list
  • Conference room extension number
  • Allow external access
  • Allow external callers to start conference
  • Log level
  • IP address
  • Subnet mask
  • Default gateway
  • DNS server address
  • Host name
  • Domain name
  • NTP server
  • DHCP
  • Start IP address range
  • End IP address range
  • Email address PBX
  • Sender name email
  • Enable email
  • SMTP server

 

 

  • No labels