Introduction

This feature is under investigation and is only allowed to be used with support from Gigaset, please contact your local Technical Sales if you would like to use this feature.

With this new feature, the N720 is connected with other platforms via IP address instead of using the SIP registration method. This feature allows:

• Connection to Cisco platform using the Cisco Call manager
• Providers that connect via IP address and not using SIP registration
• SIP trunks provided by PBX systems or Internet Service Providers

After successful trial period, this feature will be official released.

N720 Software version

This feature can be used with the N720 Release 89 and higher.

N720 configuration

In this example we have the following set-up

• PBX has IP address 192.168.0.50
• All numbers starting with "2" are routed to the N720
• N720 has IP address 192.168.0.123
• SIP accounts are configured using the internal numbers of the PBX.
  • Number 200 has username 200 and Password 200
  • Number 201 has username 201 and Password 201
  • .....
• The internal number is in the Invite header, the PBX dials 200 and the Invite with number 200 is send. Device/handset with number 200 will ring.

Provider configuration

User/device configuration