The Web configurator provides you with a user interface that you can use to configure your Maxwell 10 on the PC. 
Prerequisites:

  • Your phone is connected to the local network. 
  • The Web server is enabled.

 

Enabling the web server
On the Start screen tap on  to open the list of available apps. -> Select Settings.

Select WebUI -> Drag switch by WebUI to the right to switch on the Web server function.

Starting the Web configurator

To start the Web configurator you will need the IP address for your phone. You will find this via the phone display, in the Ethernet or WLAN settings for the device: 
If connected via Ethernet:

  • On the Start screen tap on  -> Select  Settings ->  Ethernet -> Ethernet configuration.

If connected via Wi-Fi:

  • On the Start screen tap on  -> Select  Settings ->  Wi-Fi -> Tap on the network your phone is connected to.

  • The IP addresses are also displayed on the status page:

-> -> Settings -> WebUI.

  • The IP address can sometimes change, depending on the settings of the DHCP server in your network.

Accessing the Web configurator:

  • Launch the Webbrowser on your PC.
  • Enter the IP address in the browser's address field. Example: 

You can access the web-interface of the device directly via the Chrome Browser on Maxwell 10 using: http://IPADDRESS:8080 or http://localhost:8080


The login screen appears.

  • Select the appropriate language from the drop-down list.
  • Enter the password. Default: admin
  • Click on Login.

The Web configurator will now start.

  • Select the function that you wish to use.
  • Use the Settings tab to set or change individual functions on your phone.
  • Open the Status tab to obtain information about the status of your phone

For your security, you should change the default passwords

 

  • No labels