Introduction

How to connect your Jabra PRO with the Maxwell 10

Gigaset tested this with the following devices.

• Maxwell 10 Software 1.2.0 and 1.2.18
• Jabra PRO 9470
• Jabra Link 14201-10 DHSG cable.

Gigaset cannot support you with questions about the Jabra Headset, for this contact your supplier.

Connection

• Plug the 1-sided end of the DHSG cable into the Maxwell EHS socket.

• Insert the RJ9 plug of the DHSG cable into the headset base socket marked with a "phone" symbol and the RJ45 plug into the socket marked with "AUX".

Then follow the instructions of the Jabra PRO base SmartSetup Wizard.

Select phone settings, "Desk phone", then "Connect to a desk phone?", "Manual".

Select adapter type "DHSG"

Set the phone setup switch to position "A".

We recommend setting the microphone volume to 6 out of 13.