Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 25 Next »

Software download

For the software-Download, please scroll down!

Updating firmware

Firmware updates can be downloaded from this page, so you can ensure your phone is always up to date. You can find the current version of your firmware on the Device status screen. You can update your phone automatically or manually. Any PC connected to the phone will not be able to access the local network and the Internet during the firmware update.

There are 4 ways to upgrade your device.
Each way will take about 7.5 minutes to finish the firmware upgrading, please pay attention to wait for success.

By Web GUI:
Goto: Settings -> System -> Firmware Update

Choose the file from hard-disk and Press <Load>

By Gigaset T300/T500 Auto provisioning
Just connect your phone into the same network as your Gigaset T300/T500 PBX is connected and after the device is started, the PBX will load a newer Firmware when available.

Internet update
Goto: Settings -> System -> Firmware Update
Select Yes for Automatic check for software updates and/or Automatic check for profile updates.
Enter the Web address for the automatic update search in the Data server field. Click on Update firmware to start the search and to load the new firmware.


By tftp
In command line window,

tftp -i "IP address" put <filename.img>

Don’t unplug your power cord during Firmware upgrade, else you need to use the recovery mode to get the device working again.







Firmware 02.00.03

Firmware 02.00.01

Firmware 02.00.00

Firmware 01.00.09




Release Notes 02.00.03

Release Notes 02.00.01

Release Notes 02.00.00










  • No labels