Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

See below for a list with supported features when using the Gigaset IP devices behind an NEC V8100 PBX system.
All tests were performed by the Gigaset pro support team.

Version : V. 9.0

Feature                                          DE310 / DE410 IP PRO      N720 Multi cell    
Software release:  02.00.0571.073
Basic CallYesYes
Calling line (CLIP)YesYes
Connected line (COLP)YesYes
Anonymous callNoNo
Do Not DisturbYesPBX code 847+3
Message waitingNoNo
Call list/historyYesYes
Voice mail deposit/retrievalYesNo
Call waitingNoNo
Call Hold / ToggleNoNo
Call forward (CFU)848+1+Number848+1+Number
Call forward (CFNR)845+1+Number845+1+Number
Call forward (CFB) 843+1+Number843+1+Number
Call Transfer attendedYesYes
Call Transfer unattendedYesYes
Call Transfer blindYesYes
DTMF (RFC2833)YesYes
Conference 3ptyNoNo
BLF Busy / Idle indicationNoNo
Call pick-up direct  (programmable)YesYes
Call pick-up group (programmable)YesYes
Call pick-up BLFNoNo
Call completed elsewhereNoNo
Auto provisioning-Pending

Very important:

To use our VoIP DECT system (N720/N510) with this PBX the VoIP board IPLB must be used.

The DExxx phones function with either the IPLA and IPLB board.

NEC cannot be considered as a full IP-PBX and some features are available only with proprietary phones that have specific function keys or with analog phones with codes (example: anonymous calls or  3 party conference).

 

 

 

  • No labels