Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

See below for a list with supported features when using the Gigaset IP devices behind an NEC V8100 PBX system.
All tests were performed by the Gigaset pro support team.

Version : V. 9.0

Feature                                          DE310 / DE410 IP PRO      N720 Multi cell    N510 IP Pro
Software release:  02.00.0571.07342.081
Basic CallYesYesYes
Calling line (CLIP)YesYesYes
Connected line (COLP)YesYesYes
Anonymous callNoNoNo
Do Not DisturbYesPBX code 847+3PBX code 847+3
Message waitingNoNoYes
Call list/historyYesYesYes
Voice mail deposit/retrievalYesNoYes
Call waitingYes*Yes*Yes*
Call Hold / ToggleNoNoNo
Call forward (CFU)848+1+Number848+1+Number848+1+Number
Call forward (CFNR)845+1+Number845+1+Number845+1+Number
Call forward (CFB) 843+1+Number843+1+Number843+1+Number
Call Transfer attendedYesYesYes
Call Transfer unattendedYesYesYes
Call Transfer blindYesYesYes
DTMF (RFC2833)YesYesYes
Conference 3ptyNoNoNo
BLF Busy / Idle indicationNon/an/a
Call pick-up direct  (programmable)YesYesYes
Call pick-up group (programmable)YesYesYes
Call pick-up BLFNon/an/a
Call completed elsewhereNoNoNo
Auto provisioningNoNoNo

 *Call waiting works from external calls routed directly to the extension number

Very important:

To use our VoIP DECT system (N720/N510) with this PBX the VoIP board IPLB must be used.

The DExxx phones function with either the IPLA board or the IPLB board.

NEC cannot be considered as a full IP-PBX and some features are available only with proprietary phones that have specific function keys or with analog phones with codes (example: anonymous calls or three-way call/Conference).

 

 

 

  • No labels