Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »


The SIP UPDATE method allows a client to update parameters of a session (such as the set of media streams and their codecs) but has no impact on the state of a dialog. In that sense, it is like a re-INVITE, but unlike re-INVITE, it can be sent before
the initial INVITE has been completed. This makes it very useful for updating session parameters within early dialogs.

Some platforms send a SIP UPDATE message to check if the client is still present, if the device does not answer or send the wrong response, the call is disconnected by the platform.

Error reported by the customer: Call is disconnected after ... minutes.

There are 2 Methods to enable/disable SIP update.

  1. Provisioning
  2. Web-interface (Software 241 or higher.)


Provisioning parameterValue

0x173e = SIP UPDATE disabled

0x373e = SIP UPDATE enabled



From software 241 or higher, the SIP UPDATE can be enabled/disabled via the web-interface.

  • Open the web-interface
  • Go to: Settings - Telephony - Advanced VoIP Settings - SIP UPDATE

  • No labels