You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Software 2.12.4, March 2017
Bug-fixes and improvements:

  • AES encryption XML provisioning file
  • Headset - USB phone interface - Plantronics
  • Asynchronous Codec handling
  • tuning of FK "Messages"
  • Message waiting subscribe should not be send
  • Support "+" in dial preparation

  • USB over current detection

  • [PhoneUI] Saving system settings is password protected
  • [PhoneUI] VLAN settings to be displayed and edit in submenu Settings
  • EHS / DHSG support of JABRA
  • [WebUI][Door call] Improve usability of the web page
  • Gradwell MWI support
  • Select Services menu items should be possible to disable
  • Delete Call History using WebUI
  • DHCP options 15/66
  • Codec negotiation goes wrong on hold calls - resolved
  • [Corporate Directory] Display format does not work - resolved
  • [PhoneUI] Message "No entries" is not showing up - resolved
  • [Timer] After Call Transfer Timer shows 23:59:59 on display - resolved
  • [LDAP] Autolookup is not working with second number - resolved
  • [Corporate Directory] Not first sorted entry is selected. Selection starts from B instead of A - resolved
  • Voicemail is played automatically after pressing CK key - resolved
  • Ringtone plays on idle screen - resolved
  • AICC with Call Manager is not working sufficient - resolved
  • [EHS] Conference: no speechpath in special case - resolved
  • [EHS] Headset LED should be switched off - resolved
  • Codec negotiation goes wrong on hold calls - resolved
  • NTP seems to stop after no answer - resolved

Software 2.11.6, February 2017
Bug-fixes and improvements:

  • Added audio Codec G.729 A/B

  • Support of "Event: check-sync;reboot=true"

  • LongPress (LP) functions for keys 1-4 (QuickDial, FAC, ActionURL)
  • Tuned function of FK "DND"

  • Provisioning Timer setup for nightly provisioning (Automatic provisioning between 1 and 4 am (randomly))

  • [PhoneUI] displaying of SIP messages on Maxwell 3
  • [PhoneUI] displaying of SIP messages on Maxwell Basic
  • Distinctive ring improvement to support more platforms
  • [Door Call] No automatic disconnect after Door Opener
  • Possibility to "Transfer" via Softkey during Ringing State
  • Phone System Broadsoft with BLF subscription added
    • 36. BASIC – Codec Renegotiation: Blind Transfer of Call on Hold (P0)
    • 80. SERVICE – Meet-Me Conference (P0)
    • 81. SERVICE – Meet-Me Conference – G722 (P1)
    • 230. REDUN – REGISTER Failover (P1)
  • Event "Registration successful" does not work - resolved
  • Ringtone stops playing after a while - resolved
  • Sometimes there is no possibility to access WebUI after FW update - resolved
  • Maxwell freezes on connecting corded headset (Headset Hardware related) - resolved
  • Kwebbl - SRTP after 200 OK - resolved
  • [Provider 3CX] Call Transfer buggy - resolved
  • IP Connection - SRV+A buggy usage - resolved
  • [Call Divert] There is no possibility to enter phone number while activating Call Divert first time - resolved

  • Codec negotiation fails - resolved

  • Polish character not displayed properly - resolved

Software 1.16.3, January 2017
Bug-fixes and improvements:

  • Unable to perform firmware update due to lack of free space

  • Doubled ringing tone - resolved
  • Provisioning is crashing when xml does not contain versionfield - resolved
  • First global contact is displayed when voicemail is calling - resolved
  • Switching between allow/don't allow packet fragmentation has no influence on HTTP packets - resolved
  • [Broadsoft] Maxwell doesn't switch to inband DTMF when RFC4733 and Audio are set - resolved
  • No information about new voicemail-several voicemail boxes - resolved
  • Wrong voice mail number is shown in Call Divert - resolved
  • Call divert to voicemail is not displayed on the IDLE screen - resolved
  • Maxwell 3 BLF does not show name of the key but phonenumber - resolved

Software 1.15.14, November 2016
Bug-fixes and improvements:

  • Door Station support

  • New layout IDLE screen, text corresponding to the function keys

  • Norwegian language added
  • Switch off back-light in Idle State
  • SWYX Interoperability
  • Acoustic feedback on confirmations
  • SIP Security functionality
  • Initial support of SRTP
  • Conference button does not put active call on hold
  • [T440/640] Enhance XML protocol for Call waiting and Withhold
  • XML directory: use http digest authentication
  • Kwebbl: BLF is deactivated by NOTIFY with Wrong Call ID
  • Open listening in headset mode
  • Translations update
  • Update of Audio settings
  • [XML Interface] Perform Call List Update
  • [XML Interface] Voicemail delete
  • [MWI button]LED still flashes after turn off in WebUI.
  • [Programmable Key] Missing synchronization between LED's state and feature status.
  • [Call State] "No Entries" pop up does not disappear after accessing empty Local Directory in Call State.
  • Sometimes lack of incoming speech-path.
  • Possible to make outgoing call via deactivated VoIP account.
  • Action URL's / Events not working.
  • It is not possible to start a call from local directory using Hands-free button

  • ReINVITEs sent by Max3B contain only 1 codec in SDP.

  • No change audio path renegotiated by 183 Session Progress.
  • UPDATE with redirecting SDP not accepted.
  • DNS-SRV is not done when provisioned.
  • [speechpath] More digits pressed during the call, longer time without speech path when we make a consultation.
  • Device switches to port 5061 because of DNS.
  • DND LED not switched on.
  • Access code is added while dialing from Local Directory in case when option "For net directory" is configured for access code settings".

Software 1.14.6, August 2016
Bug-fixes and improvements:

  •  Automatic Headset Detection
  • CSeq validation can be disabled via provisioning
  • [hybird] self-signed certificate support

  • Adaption of special characters

  • Function Key: CCBS
  • [SWYX Interoperability] MWI for Voicemail
  • [SWYX Interoperability] BLF keys support
  • [ES] Provider LCR COM official released
  • Feature Set

  • Phonebook/directory search with more than 1 letter

  • Syslog Client - increased default log level 
  • Start dialling with Center Key
  • Provisioning: Direct link to XML and firmware file
  • Provisioning: Version Value field is optional
  • Outbound proxy port is used for sending BLF subscribe
  • Play "Ringing" progress tone on receiving SIP message
  • [Maxwell 3] FK BLF - action in active state
  • Directory - sort by first: unwanted comma - resolved
  • NTP client initialization sometimes fail - resolved
  • Key click missing in dial preparation after 2nd digit - resolved

  • Speaker amplifier not switched off - resolved

  • NAT refresh time not working - resolved
  • Maxwell doesn't end call when transefring fails - resolved
  • Missed calls during an active call are not saved on call list - resolved
  • Default connection is not active after configuring - resolved
  • [DTMF] Not all events are send while RFC4733 is used - resolved
  • Provisioning server adress is not saved correctly - resolved

  • '*' key isn't working while adding new entry in local directory after editing - resolved

Software 1.13.6, July 2016
Bug-fixes and improvements:

  • [hybird support] Identify phone system via DHCP Option 43
  • UPDATE PJSIP to v.2.4.5
  • Basic Support of Starface PBX systems (depending on Starface Firmware Release!)

  • PAI / PPI header infos are used for the call list

  • Feature Set

  • [Galilei] Show call forwarding only for CFU on Idle

  • Displayname is used for Call Divert Info message   
  • Default Time zone changed to (GMT+01:00) Amsterdam, Berlin
  • Provisioning parameter for XML-interface port
  • Call waiting enabled by default
  • Counting missed / accepted calls
  • BLF is not working behind Centile
  • Screensaver in not deactivated after new voicemail info appears or unplugging ethernet cable
  • Outgoing call switch from UDP to TCP

  • 1st incoming call after reboot – speech path on

  •  All lists of certificates on WebUI are empty, even after rest to default
  • Shortly pressed keys are not recognized
  • EHS headset active/inactive not always in sync with device.
  • No labels