Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Parameter nameValue: minValue: maxvalidatorValue: Allowed
Web-interface: Settings - Network - IP
    Device name
    IPv4 / IPv6
    Dynamic / Static
    IP address
    Subnet mask
    Standard gateway
    Preferred DNS
    Alternate DNS
Web-interface: Settings - Network - LAN
    VLAN tagging
    VLAN identifier
    VLAN priority
Web-interface: Settings - Base stations - Administration
ConfirmedBaseStations.<mac>.name   Name / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT network
ConfirmedBaseStations.<mac>.ucTxPower

0

1 

0 = Normal power output (Default)
1= Reduce TX power by 8dB for external antenna operation

ConfirmedBaseStations.<mac>.bActivateCell01 0 = Base station deactivated
1 = Activated base station (Default)
Web-interface: Settings - Base stations - Synchronization

ConfirmedBaseStations.<mac>.ucCluster

110 Select the cluster to which the base should be assigned to from the option menu.
ConfirmedBaseStations.<mac>.ucSyncLevel110 Select the synchronization level for the base station.
ConfirmedBaseStations.<mac>.bSyncLanMaster01 

0 = Off (Default)
1 = LAN Master

Web-interface: Settings - Provider or PBX profiles
SipProvider.<0-9>.Name IP<1-10>  Name for the provider or PBX profile. This name is shown in the Provider/PBX list
SipProvider.<0-9>.Domain   Domain part of the user address 
SipProvider.<0-9>.ProxyServerAddress   Proxy server address
SipProvider.<0-9>.ProxyServerPort165535

 

Proxy server port (Default 5060)
SipProvider.<0-9>.RegServerAddress   Registration server
SipProvider.<0-9>.RegServerPort165535

 

Registration server port (Default 5060)
SipProvider.<0-9>.RegServerRefreshTimer  

 

Registration refresh time (Default 180)
SipProvider.<0-9>.TransportProtocol11: UDP
2: TCP
3: TLS
 General data of your service provider > Transport protocol
SipProvider.<0-9>.UseSIPS00: off
1: on
 General data of your service provider > Use SIP Security (SIPS)
SipProvider.<0-9>.DnsQuery00: A
1: SRV + A 
 Redundancy > Redundancy - DNS query
SipProvider.<0-9>.FailoverServerEnabled00: off
1: on
 Failover Server > Enable registration
SipProvider.<0-9>.FailoverServerAddress   Failover Server > Registration server
SipProvider.<0-9>.FailoverServerPort5060 

range: 1-65535

Failover Server > Registration port
SipProvider.<0-9>.OutboundProxyMode2  Network data of your service provider > Outbound proxy mode
SipProvider.<0-9>.OutboundProxyAddress   Network data of your service provider > Outbound server address
SipProvider.<0-9>.OutboundProxyPort5060 

range: 1-65535

Network data of your service provider > Outbound proxy port
SipProvider.<0-9>.MWISubscription   Network data of your service provider > SIP SUBSCRIBE for Net-AM MWI
SipProvider.<0-9>.AvailableCodecs18,9,8,0

0: g711u
8: g711a
9: g722
18: g729

 Settings for Codecs > Available codecs
SipProvider.<0-9>.ActiveCodecs18,9,8,00: g711u
8: g711a
9: g722
18: g729
 Settings for Codecs > Active codecs
SipProvider.<0-9>.RTPPtime20  Settings for Codecs > RTP Packetisation Time (ptime)
SipProvider.<0-9>.HoldType0  Settings for Codecs > Signalling Options (SMD) for "Hold"
SipProvider.<0-9>.CT_HoldTT_Attended0  Settings for Codecs > Hold towards Transfer-Target > Attended Transfer
SipProvider.<0-9>.CT_HoldTT_Unattended0  Settings for Codecs > Hold towards Transfer-Target > Unattended Transfer
SipProvider.<0-9>.SRTP_Enabled00: off
1: on
 Settings for Codecs > SRTP options > Secure Real Time Protocol
SipProvider.<0-9>.AcceptNonSRTPCalls10: off
1: on
 Settings for Codecs > SRTP options > Accept non-SRTP calls
SipProvider.<0-9>.CLIPSource20: FROM
1: PPI+FROM
2: PAI+PPI+FROM
 Display of Caller Information > Calling Party (User Part)
Mobile devices > oper name "add_hs", see XML files definition
hs.<ipui>.RegStatus Settings - Mobile devices - Administration Mobile device > RegStatus

hs.<ipui>.DECT_AC

  

regex: ^\d{4}$

Mobile device > Authentication Code (PIN)
SipAccount.<ipui>.AuthName   Personal provider data > Authentication name
SipAccount.<ipui>.AuthPassword  

 

Personal provider data > Authentication password
SipAccount.<ipui>.UserName   Personal provider data > Username
SipAccount.<ipui>.DisplayName   Personal provider data > Display name
SipAccount.<ipui>.ProviderId   Personal provider data > VoIP provider
hs.<ipui>.DirectAccessDir   Online directories > Directory for direct access
hs.<ipui>.IntKeyDir   Online directories > Corporate directory for INT key
hs.<ipui>.AutoLookupDir   Online directories > Automatic look-up
hs.<ipui>.LDAPUseSIPCredentials   LDAP authentication > Use personal provider data (SIP)
hs.<ipui>.LDAPUsername   LDAP authentication > Username
hs.<ipui>.LDAPPassword   LDAP authentication > Password
SipAccount.<ipui>.VoiceMailMailbox   Network mailbox configuration > Call number or SIP name (URI)
SipAccount.<ipui>.VoiceMailActive   Network mailbox configuration > Activate network mailbox
hs.<ipui>.CallManagerCallsVia  

enum: Headset, Handsfree, No

Call manager > Accept calls directly via Call Manager

hs.<ipui>.SaveMissedCalls

hs.<ipui>.SaveAcceptedCalls

   Missed calls and alarms > Missed/accepted calls count

hs.<ipui>.ShowMissedCalls

   Missed calls and alarms > Flashing LED (MWI) for missed calls

hs.<ipui>.ShowMissedAlarms

   Missed calls and alarms > Flashing LED (MWI) for missed alarms

hs.<ipui>.ShowMissedNetAM

   Missed calls and alarms > Flashing LED (MWI) for network mailbox
Telephony > VoIP
DmGlobal.0.Port5060 range: 1-65535SIP > SIP port
DmGlobal.0.Timers_T1500 regex: ^\d{1,3}$SIP > SIP timer T1
DmGlobal.0.Timers_Session1800 

regex: ^\d{1,4}$

SIP > SIP session timer
DmGlobal.0.Timers_FailedRegistration300 

regex: ^\d{1,4}$

SIP > Failed registation retry timer
DmGlobal.0.Timers_Subscription1800 

regex: ^\d{1,4}$

SIP > Subscription timer
DmGlobal.0.PRACK00: off
1: on
 SIP > PRACK

DmGlobal.0.QoS_SIP_DSCP

34  Quality of Service (QoS) > SIP ToS / DiffServ

DmGlobal.0.QoS_RTP_DSCP

46  Quality of Service (QoS) > RTP ToS / DiffServ
Telephony > Audio
DmGlobal.0.WidebandEnabled00: off
1: on
 Audio > Wideband with codec G.722
Telephony > Call settings

Telephony.0.CT_ViaRKey

10: off
1: on
 Call Transfer > Call transfer via R key

Telephony.0.CT_ByOnHook

10: off
1: on
 Call Transfer > Transfer call by on-hook

Telephony.0.CT_AutoDetermineAddress

00: off
1: on
 Call Transfer > Determine target address automatically

Telephony.0.AccessCode

   Access Code > Access Code

Telephony.0.AccessCodeFor

 0: Outgoing calls list
1: Incoming calls list
2: LDAP
3: Local directory
4: Public net directory
5: Dial editor 
 Access Code > is added to numbers

AreaCodes.0.Country

Germany

  Area Codes > Country

AreaCodes.0.Int_Prefix

0  Area Codes > International Prefix

AreaCodes.0.Int_Code

49  Area Codes > International Area code

AreaCodes.0.Local_Prefix

0  Area Codes > Local Prefix

AreaCodes.0.Local_Code

   Area Codes > Local Area code

Telephony.0.ToneScheme

Germany

  Tone Selection > Tone scheme
Online directories > Public

XMLDir.0.ProviderName

Public

  Public Directories > Directory name

XMLDir.0.ServerURL

   Public Directories > Server address

XMLDir.0.Username

   Public Directories > Username

XMLDir.0.Password

   Public Directories > Password
Netdir.4.Activated   Public White Pages > Enable Public White Pages

XMLDir.0.WhitePagesDirName

   Public White Pages > Directory name

XMLDir.0.StartWithListWP

00: off
1: on
 Public White Pages > Start mode
Netdir.5.Activated   Public Yellow Pages > Enable Public Yellow Pages

XMLDir.0.YellowPagesDirName

   Public Yellow Pages > Directory name

XMLDir.0.StartWithListYP

00: off
1: on
 Public Yellow Pages > Start mode
Netdir.6.Activated   Public Private Pages > Enable Public Private Pages

XMLDir.0.PrivatePagesDirName

   Public Private Pages > Directory name

XMLDir.0.StartWithListPP

00: off
1: on
 Public Private Pages > Start mode
Online directories > Corporate

LDAPDir.0.DirName

   LDAP directory > Directory name
Netdir.0.Activated   LDAP directory > Enable directory

LDAPDir.0.ServerURL

   Access to the LDAP data server > Server address

LDAPDir.0.ServerPort

389 range: 1-65535Access to the LDAP data server > Server port

LDAPDir.0.BaseDN

   Access to the LDAP data server > LDAP Search base (BaseDN)

LDAPDir.0.UseIndividualCredentials

00: off
1: on
 Access to the LDAP data server > Mobile device specific authentication

LDAPDir.0.Username

   Access to the LDAP data server > Username

LDAPDir.0.Password

   Access to the LDAP data server > Password

LDAPDir.0.StartWithList

10: off
1: on
 Search in LDAP database > Enable list mode

LDAPDir.0.NameFilter

(|(cn=%)(sn=%))

  Search in LDAP database > Name filter

LDAPDir.0.NumberFilter

(|(telephoneNumber=%)(mobile=%))

  Search in LDAP database > Number filter

LDAPDir.0.AdditionalFilter1Name

City

  Search in LDAP database > Additional filter #1 name

LDAPDir.0.AdditionalFilter1

(|(l=%))

  Search in LDAP database > Additional filter #1 value

LDAPDir.0.AdditionalFilter2Name

Street

  Search in LDAP database > Additional filter #2 name
LDAPDir.0.AdditionalFilter2

(|(street=%))

  Search in LDAP database > Additional filter #2 value

LDAPDir.0.DisplayName

%sn, %givenName

  Search in LDAP database > Display format

LDAPDir.0.MaxNrOfSearchEntries

50 regex: ^\d{1,4}$Search in LDAP database > Max. number of search results

LDAPDir.0.ItemFN

   Configuration of directory items > First name

LDAPDir.0.ItemLN

   Configuration of directory items > Surname

LDAPDir.0.ItemPH

   Configuration of directory items > Phone (home)
LDAPDir.0.ItemPO   Configuration of directory items > Phone (office)
LDAPDir.0.ItemPM   Configuration of directory items > Phone (mobile)

LDAPDir.0.ItemEM

   Configuration of directory items > E-mail

LDAPDir.0.ItemFX

   Configuration of directory items > Fax

LDAPDir.0.ItemCP

   Configuration of directory items > Company

LDAPDir.0.ItemST

   Configuration of directory items > Street

LDAPDir.0.ItemCT

   Configuration of directory items > City

LDAPDir.0.ItemZP

   Configuration of directory items > Zip

LDAPDir.0.ItemCO

   Configuration of directory items > Country

LDAPDir.0.ItemAA

   Configuration of directory items > Additional attribute

LDAPDir.0.IsAdditionalAttributeDialable

00: off
1: on
 Configuration of directory items > Additional attribute can be dialed
Online directories > XML
System > Web configurator
WebUIAccounts.1.Password   Change Password > New password (Admin)
System > Provisioning and configuration    
Provisioning.global.ProvisioningServer

http://profile.gigaset.net/device/%DVID/

  Provisioning and configuration > Provisioning server
System > Security
Security.global.HTTPAuthUsername   HTTP Authentication > HTTP digest username

Security.global.HTTPAuthPassword

   HTTP Authentication > HTTP digest password
System > System log
DmGlobal.0.SysLogEnable00: off
1: on
 System log > Activate system log
DmGlobal.0.SysLogServer   System log > Server address
DmGlobal.0.SysLogServerPort514 range: 1-65535System log > Server port

StateInfo.global.DebugLevelMask

DWED: debug
W: warning
E: error
I: info
T: test
 System log > Log level
System > Date and time
DmGlobal.0.NtpServer

0.europe.pool.ntp.org,1.europe.pool.ntp.org,

2.europe.pool.ntp.org,3.europe.pool.ntp.org

  Date and time > Time server
DmGlobal.0.TimeZone timezones.txt Date and time > Timezone
  • No labels