Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Parameter nameValue: minValue: maxValue: Allowed
Web-interface: Settings - Network - IP
   Device name
   IPv4 / IPv6
   Dynamic / Static
   IP address
   Subnet mask
   Standard gateway
   Preferred DNS
   Alternate DNS
Web-interface: Settings - Network - LAN
   VLAN tagging
   VLAN identifier
   VLAN priority
Web-interface: Settings - Base stations - Administration
ConfirmedBaseStations.<mac>.name  Name / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT network
ConfirmedBaseStations.<mac>.ucTxPower

0

1

0 = Normal power output (Default)
1= Reduce TX power by 8dB for external antenna operation

ConfirmedBaseStations.<mac>.bActivateCell010 = Base station deactivated
1 = Activated base station (Default)
Web-interface: Settings - Base stations - Synchronization

ConfirmedBaseStations.<mac>.ucCluster

110Select the cluster to which the base should be assigned to from the option menu.
ConfirmedBaseStations.<mac>.ucSyncLevel110Select the synchronization level for the base station.
ConfirmedBaseStations.<mac>.bSyncLanMaster01

0 = Off (Default)
1 = LAN Master

Web-interface: Settings - Provider or PBX profiles
SipProvider.<0-9>.Name IP<1-10> Name for the provider or PBX profile. This name is shown in the Provider/PBX list
SipProvider.<0-9>.Domain  Domain part of the user address 
SipProvider.<0-9>.ProxyServerAddress  Proxy server address
SipProvider.<0-9>.ProxyServerPort165535Proxy server port (Default 5060)
SipProvider.<0-9>.RegServerAddress  Registration server
SipProvider.<0-9>.RegServerPort165535Registration server port (Default 5060)
SipProvider.<0-9>.RegServerRefreshTimer  Registration refresh time (Default 180)
SipProvider.<0-9>.TransportProtocol131 = UDP
2 = TCP
3 = TLS
SipProvider.<0-9>.UseSIPS01

0 = SIPS disabled (Default)
1 = SIPS enabled

SipProvider.<0-9>.DnsQuery010 = A
1 = SRV + A 
SipProvider.<0-9>.FailoverServerEnabled00: off
1: on
Failover Server > Enable registration
SipProvider.<0-9>.FailoverServerAddress  Registration server
SipProvider.<0-9>.FailoverServerPort165535Registration port (Default 5060)
SipProvider.<0-9>.OutboundProxyMode2 Outbound proxy mode
SipProvider.<0-9>.OutboundProxyAddress  Outbound server address
SipProvider.<0-9>.OutboundProxyPort165535Outbound proxy port  (Default 5060)
SipProvider.<0-9>.MWISubscription01

0 = Do not send SIP Subscribe for MWI
1 = Send SIP Subscribe for MWI

SipProvider.<0-9>.AvailableCodecs18,9,8,0

 

0 = g711u
8 = g711a
9 = g722
18 = g729
SipProvider.<0-9>.ActiveCodecs18,9,8,00: g711u
8: g711a
9: g722
18: g729
0 = g711u
8 = g711a
9 = g722
18 = g729
SipProvider.<0-9>.RTPPtime1020, 30Length of time in milliseconds (10, 20 (Default), 30) represented by the audio data in one packet.
SipProvider.<0-9>.HoldType010 = Inactive
1 = Sendonly (Default)
SipProvider.<0-9>.CT_HoldTT_Attended010 = Attended Transfer
1 = Unattended Transfer
SipProvider.<0-9>.CT_HoldTT_Unattended01Settings for Codecs > Hold towards Transfer-Target > Unattended Transfer
SipProvider.<0-9>.SRTP_Enabled010 = SRTP disabled (Default)
1 = SRTP enabled
SipProvider.<0-9>.AcceptNonSRTPCalls01

0 = Do not accept non-SRTP calls
1 = Accepts non-SRTP calls

SipProvider.<0-9>.CLIPSource020 = FROM
1 = PPI+FROM
2 = PAI+PPI+FROM (Default)
Web-interface: Settings - Mobile devices - Administration
hs.<ipui>.RegStatus   

hs.<ipui>.DECT_AC

  Authentication Code (PIN)
SipAccount.<ipui>.AuthName  SIP Authentication name
SipAccount.<ipui>.AuthPassword  SIP Authentication password
SipAccount.<ipui>.UserName  SIP Username
SipAccount.<ipui>.DisplayName  SIP Display name
SipAccount.<ipui>.ProviderId  VoIP provider
hs.<ipui>.DirectAccessDir  Directory for direct access
hs.<ipui>.IntKeyDir  Corporate directory for INT key
hs.<ipui>.AutoLookupDir  Automatic look-up
hs.<ipui>.LDAPUseSIPCredentials  LDAP Use personal provider data (SIP)
hs.<ipui>.LDAPUsername  LDAP Username
hs.<ipui>.LDAPPassword  LDAP Password
SipAccount.<ipui>.VoiceMailMailbox  Voicemail box number / name
SipAccount.<ipui>.VoiceMailActive  Activate Voicemail box
hs.<ipui>.CallManagerCallsVia  Accept calls directly via Call Manager

hs.<ipui>.SaveMissedCalls

hs.<ipui>.SaveAcceptedCalls

  Missed/accepted calls count

hs.<ipui>.ShowMissedCalls

  Flashing LED (MWI) for missed calls

hs.<ipui>.ShowMissedAlarms

  Flashing LED (MWI) for missed alarms

hs.<ipui>.ShowMissedNetAM

  Flashing LED (MWI) for network mailbox
Web-interface: Settings - Mobile devices - Registration Center
    
Web-interface: Settings - Telephony - VoIP
DmGlobal.0.Port165535SIP port (Default 5060)
DmGlobal.0.Timers_T1  SIP timer T1 (Default 500)
DmGlobal.0.Timers_Session  SIP session timer (Default 1800)
DmGlobal.0.Timers_FailedRegistration  Failed registration retry timer (Default 300)
DmGlobal.0.Timers_Subscription  Subscription timer (Default 1800)
DmGlobal.0.PRACK010 = PRACK disabled
1 = PRACK enabled

DmGlobal.0.QoS_SIP_DSCP

  SIP ToS / DiffServ (Default 34)

DmGlobal.0.QoS_RTP_DSCP

  RTP ToS / DiffServ (Default 46)
Web-interface: Settings - Telephony - Audio
DmGlobal.0.WidebandEnabled010 = Wideband with codec G.722 disabled
1 = Wideband with codec G.722 disabled
Web-interface: Settings - Telephony - Call settings

Telephony.0.CT_ViaRKey

010: off
1: on

Telephony.0.CT_ByOnHook

010: off
1: on

Telephony.0.CT_AutoDetermineAddress

010: off
1: on

Telephony.0.AccessCode

  Access Code

Telephony.0.AccessCodeFor

  0 = Outgoing calls list
1 = Incoming calls list
2 = LDAP
3 = Local directory
4 = Public net directory
5 = Dial editor 

AreaCodes.0.Country

Germany

 Country

AreaCodes.0.Int_Prefix

0 International Prefix

AreaCodes.0.Int_Code

49 International Area code

AreaCodes.0.Local_Prefix

0 Local Prefix

AreaCodes.0.Local_Code

  Local Area code

Telephony.0.ToneScheme

Germany

 Tone scheme
Web-interface: Settings - Online directories - Public

XMLDir.0.ProviderName

Public

 Directory name

XMLDir.0.ServerURL

  Server address

XMLDir.0.Username

  Username

XMLDir.0.Password

  Password
Netdir.4.Activated  Enable Public White Pages

XMLDir.0.WhitePagesDirName

  Directory name

XMLDir.0.StartWithListWP

010: off
1: on
Netdir.5.Activated  Enable Public Yellow Pages

XMLDir.0.YellowPagesDirName

  Directory name

XMLDir.0.StartWithListYP

010: off
1: on
Netdir.6.Activated  Enable Public Private Pages

XMLDir.0.PrivatePagesDirName

  Directory name

XMLDir.0.StartWithListPP

0 0: off
1: on
Web-interface: Settings - Online directories - Corporate

LDAPDir.0.DirName

  LDAP Directory name
Netdir.0.Activated  LDAP Enable directory

LDAPDir.0.ServerURL

  LDAP Server address

LDAPDir.0.ServerPort

165535LDAP Server port (Default 389)

LDAPDir.0.BaseDN

  LDAP Search base (BaseDN)

LDAPDir.0.UseIndividualCredentials

010: off
1: on

LDAPDir.0.Username

  LDAP Username

LDAPDir.0.Password

  LDAP data server Password

LDAPDir.0.StartWithList

010: off
1: on

LDAPDir.0.NameFilter

(|(cn=%)(sn=%))

 LDAP Name filter

LDAPDir.0.NumberFilter

(|(telephoneNumber=%)(mobile=%))

 LDAP Number filter

LDAPDir.0.AdditionalFilter1Name

City

 LDAP Additional filter #1 name

LDAPDir.0.AdditionalFilter1

(|(l=%))

 LDAP Additional filter #1 value

LDAPDir.0.AdditionalFilter2Name

Street

 LDAP Additional filter #2 name
LDAPDir.0.AdditionalFilter2

(|(street=%))

 LDAP Additional filter #2 value

LDAPDir.0.DisplayName

%sn, %givenName

 LDAP Display format

LDAPDir.0.MaxNrOfSearchEntries

50 LDAP Max. number of search results

LDAPDir.0.ItemFN

  Configuration of directory items > First name

LDAPDir.0.ItemLN

  Configuration of directory items > Surname

LDAPDir.0.ItemPH

  Configuration of directory items > Phone (home)
LDAPDir.0.ItemPO  Configuration of directory items > Phone (office)
LDAPDir.0.ItemPM  Configuration of directory items > Phone (mobile)

LDAPDir.0.ItemEM

  Configuration of directory items > E-mail

LDAPDir.0.ItemFX

  Configuration of directory items > Fax

LDAPDir.0.ItemCP

  Configuration of directory items > Company

LDAPDir.0.ItemST

  Configuration of directory items > Street

LDAPDir.0.ItemCT

  Configuration of directory items > City

LDAPDir.0.ItemZP

  Configuration of directory items > Zip

LDAPDir.0.ItemCO

  Configuration of directory items > Country

LDAPDir.0.ItemAA

  Configuration of directory items > Additional attribute

LDAPDir.0.IsAdditionalAttributeDialable

010: off
1: on
Web-interface: Settings - Online directories - XML
 
Web-interface: Settings - System - Web configurator
WebUIAccounts.1.Password  Change Password > New password (Admin)
   CLI Password
Web-interface: Settings - System - Capacity licensing
    
Web-interface: Settings - System - Provisioning and configuration
Provisioning.global.ProvisioningServer

http://profile.gigaset.net/device/%DVID/

 Provisioning and configuration > Provisioning server
Web-interface: Settings - System - Security
Security.global.HTTPAuthUsername  HTTP Authentication > HTTP digest username

Security.global.HTTPAuthPassword

  HTTP Authentication > HTTP digest password
Web-interface: Settings - System - System log
DmGlobal.0.SysLogEnable010: off
1: on
DmGlobal.0.SysLogServer  Server address
DmGlobal.0.SysLogServerPort  Server port (Default 514)

StateInfo.global.DebugLevelMask

DWE D = debug
W = warning
E = error
I = info
T = test
Web-interface: Settings - System - Date and time
DmGlobal.0.NtpServer

 

 

0.europe.pool.ntp.org,1.europe.pool.ntp.org,

2.europe.pool.ntp.org,3.europe.pool.ntp.org

DmGlobal.0.TimeZone  timezones.txt
  • No labels