Page tree
Skip to end of metadata
Go to start of metadata

Introduction

You can send SIP messages to the Maxwell, these will be visible on the display.

How to send a SIP message

Install a programm like SIPSAK to send SIP messages.


sipsak

sipsak -i -M -B "Test" -s sip:Name@PhoneIP

Example:

sipsak -i -M -B "Test" -s sip:1012@192.168.178.43


Session Initiation Protocol (MESSAGE)
 - Request-Line: MESSAGE sip:1012@192.168.178.43 SIP/2.0
 - Message Header
 - Message Body
 	- Line-based text data: text/plain (1 lines)
 		Test

Result:

Maxwell 2 / 3:

To delete the message, you can send an "empty" SIP message, or press the "Back" key if option is enabled.

Web-interface:

In the web-interface you can define the behavior:

Show SIP messages on display: Enable / Disable the feature to show SIP messages.

Clear SIP message with the back key.






Auto-provisioning


ParameterValue
PhoneUI.SIP.ShowSIPMessagesOnDisplay

0=Do not show SIP message

1=Show SIP messages (Default)

PhoneUI.SIP.ClearSIPMessageWithBackKey

0=Delete message with back key disabled

1=Delete message with back key enabled (Default)



  • No labels