Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Network - IP



Device name



IPv4 / IPv6



Dynamic / Static



IP address



Subnet mask



Standard gateway



Preferred DNS



Alternate DNS
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Network - LAN



VLAN tagging



VLAN identifier



VLAN priority
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Base stations - Administration
ConfirmedBaseStations.<mac>.name

Name / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT network
ConfirmedBaseStations.<mac>.ucTxPower

0

1

0 = Normal power output (Default)
1= Reduce TX power by 8dB for external antenna operation

ConfirmedBaseStations.<mac>.bActivateCell010 = Base station deactivated
1 = Activated base station (Default)
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Base stations - Synchronization

ConfirmedBaseStations.<mac>.ucCluster

110Select the cluster to which the base should be assigned to from the option menu.
ConfirmedBaseStations.<mac>.ucSyncLevel110Select the synchronization level for the base station.
ConfirmedBaseStations.<mac>.bSyncLanMaster01

0 = Off (Default)
1 = LAN Master

Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Provider or PBX profiles
SipProvider.<0-9>.Name IP<1-10>
Name for the provider or PBX profile. This name is shown in the Provider/PBX list
SipProvider.<0-9>.Domain

Domain part of the user address 
SipProvider.<0-9>.ProxyServerAddress

Proxy server address
SipProvider.<0-9>.ProxyServerPort165535Proxy server port (Default 5060)
SipProvider.<0-9>.RegServerAddress

Registration server
SipProvider.<0-9>.RegServerPort165535Registration server port (Default 5060)
SipProvider.<0-9>.RegServerRefreshTimer

Registration refresh time (Default 180)
SipProvider.<0-9>.TransportProtocol131 = UDP
2 = TCP
3 = TLS
SipProvider.<0-9>.UseSIPS01

0 = SIPS disabled (Default)
1 = SIPS enabled

SipProvider.<0-9>.SRTP_Enabled010 = SRTP disabled (Default)
1 = SRTP enabled
SipProvider.<0-9>.AcceptNonSRTPCalls01

0 = Do not accept non-SRTP calls
1 = Accepts non-SRTP calls

SipProvider.<0-9>.DnsQuery010 = A
1 = SRV + A 
SipProvider.<0-9>.FailoverServerEnabled00: off
1: on
Failover Server > Enable registration
SipProvider.<0-9>.FailoverServerAddress

Registration server
SipProvider.<0-9>.FailoverServerPort165535Registration port (Default 5060)
SipProvider.<0-9>.OutboundProxyMode2

0 = Always
2 = Never

SipProvider.<0-9>.OutboundProxyAddress

Outbound server address
SipProvider.<0-9>.OutboundProxyPort165535Outbound proxy port  (Default 5060)
SipProvider.<0-9>.MWISubscription01

0 = Do not send SIP Subscribe for MWI
1 = Send SIP Subscribe for MWI

SipProvider.<0-9>.AvailableCodecs18,9,8,0


0 = g711u
8 = g711a
9 = g722
18 = g729
SipProvider.<0-9>.ActiveCodecs18,9,8,00: g711u
8: g711a
9: g722
18: g729
0 = g711u
8 = g711a
9 = g722
18 = g729
SipProvider.<0-9>.RTPPtime1020, 30Length of time in milliseconds (10, 20 (Default), 30) represented by the audio data in one packet.
SipProvider.<0-9>.HoldType010 = Inactive
1 = Sendonly (Default)
SipProvider.<0-9>.CT_HoldTT_Attended010 = Attended Transfer
1 = Unattended Transfer
SipProvider.<0-9>.CT_HoldTT_Unattended01Settings for Codecs > Hold towards Transfer-Target > Unattended Transfer
SipProvider.<0-9>.CLIPSource020 = FROM
1 = PPI+FROM
2 = PAI+PPI+FROM (Default)
Call Completion on


Call Completion off


Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Mobile devices - Administration
hs.<ipui>.RegStatus


hs.<ipui>.DECT_AC



Authentication Code (PIN)
SipAccount.<ipui>.AuthName

SIP Authentication name
SipAccount.<ipui>.AuthPassword

SIP Authentication password
SipAccount.<ipui>.UserName

SIP Username
SipAccount.<ipui>.DisplayName

SIP Display name
SipAccount.<ipui>.ProviderId

VoIP provider
hs.<ipui>.DirectAccessDir

Directory for direct access
hs.<ipui>.IntKeyDir

Corporate directory for INT key
hs.<ipui>.AutoLookupDir

Automatic look-up
hs.<ipui>.LDAPUseSIPCredentials

LDAP Use personal provider data (SIP)
hs.<ipui>.LDAPUsername

LDAP Username
hs.<ipui>.LDAPPassword

LDAP Password
SipAccount.<ipui>.VoiceMailMailbox

Voicemail box number / name
SipAccount.<ipui>.VoiceMailActive

Activate Voicemail box
hs.<ipui>.CallManagerCallsVia

Accept calls directly via Call Manager

hs.<ipui>.SaveMissedCalls

hs.<ipui>.SaveAcceptedCalls



Missed/accepted calls count

hs.<ipui>.ShowMissedCalls



Flashing LED (MWI) for missed calls

hs.<ipui>.ShowMissedAlarms



Flashing LED (MWI) for missed alarms

hs.<ipui>.ShowMissedNetAM



Flashing LED (MWI) for network mailbox
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Mobile devices - Registration Center




Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - VoIP
DmGlobal.0.Port165535SIP port (Default 5060)
Secure

Secure SIP port (Default 5061)
DmGlobal.0.Timers_T1

SIP timer T1 (Default 500)
DmGlobal.0.Timers_Session

SIP session timer (Default 1800)
DmGlobal.0.Timers_FailedRegistration

Failed registration retry timer (Default 300)
DmGlobal.0.Timers_Subscription

Subscription timer (Default 1800)
DmGlobal.0.PRACK010 = PRACK disabled
1 = PRACK enabled



SIP Security Password

DmGlobal.0.QoS_SIP_DSCP



SIP ToS / DiffServ (Default 34)

DmGlobal.0.QoS_RTP_DSCP



RTP ToS / DiffServ (Default 46)
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - Audio
DmGlobal.0.WidebandEnabled010 = Wideband with codec G.722 disabled
1 = Wideband with codec G.722 disabled
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - Call settings

Telephony.0.CT_ViaRKey

010: off
1: on

Telephony.0.CT_ByOnHook

010: off
1: on

Telephony.0.CT_AutoDetermineAddress

010: off
1: on

Telephony.0.AccessCode



Access Code

Telephony.0.AccessCodeFor



0 = Outgoing calls list
1 = Incoming calls list
2 = LDAP
3 = Local directory
4 = Public net directory
5 = Dial editor 

AreaCodes.0.Country

Germany


Country

AreaCodes.0.Int_Prefix

0
International Prefix

AreaCodes.0.Int_Code

49
International Area code

AreaCodes.0.Local_Prefix

0
Local Prefix

AreaCodes.0.Local_Code



Local Area code

Telephony.0.ToneScheme

Germany


Tone scheme
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Online directories - Public

XMLDir.0.ProviderName

Public


Directory name

XMLDir.0.ServerURL



Server address

XMLDir.0.Username



Username

XMLDir.0.Password



Password
Netdir.4.Activated

Enable Public White Pages



Maximum number of entries

XMLDir.0.WhitePagesDirName



Directory name

XMLDir.0.StartWithListWP

010: off
1: on
Netdir.5.Activated

Enable Public Yellow Pages

XMLDir.0.YellowPagesDirName



Directory name

XMLDir.0.StartWithListYP

010: off
1: on
Netdir.6.Activated

Enable Public Private Pages

XMLDir.0.PrivatePagesDirName



Directory name

XMLDir.0.StartWithListPP

0
0: off
1: on
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Online directories - Corporate

LDAPDir.0.DirName



LDAP Directory name
Netdir.0.Activated

LDAP Enable directory

LDAPDir.0.ServerURL



LDAP Server address

LDAPDir.0.ServerPort

165535LDAP Server port (Default 389)

LDAPDir.0.BaseDN



LDAP Search base (BaseDN)

LDAPDir.0.UseIndividualCredentials

010: off
1: on

LDAPDir.0.Username



LDAP Username

LDAPDir.0.Password



LDAP data server Password

LDAPDir.0.StartWithList

010: off
1: on

LDAPDir.0.NameFilter

(|(cn=%)(sn=%))


LDAP Name filter

LDAPDir.0.NumberFilter

(|(telephoneNumber=%)(mobile=%))


LDAP Number filter

LDAPDir.0.AdditionalFilter1Name

City


LDAP Additional filter #1 name

LDAPDir.0.AdditionalFilter1

(|(l=%))


LDAP Additional filter #1 value

LDAPDir.0.AdditionalFilter2Name

Street


LDAP Additional filter #2 name
LDAPDir.0.AdditionalFilter2

(|(street=%))


LDAP Additional filter #2 value

LDAPDir.0.DisplayName

%sn, %givenName


LDAP Display format

LDAPDir.0.MaxNrOfSearchEntries

50
LDAP Max. number of search results

LDAPDir.0.ItemFN



Configuration of directory items > First name

LDAPDir.0.ItemLN



Configuration of directory items > Surname

LDAPDir.0.ItemPH



Configuration of directory items > Phone (home)
LDAPDir.0.ItemPO

Configuration of directory items > Phone (office)
LDAPDir.0.ItemPM

Configuration of directory items > Phone (mobile)

LDAPDir.0.ItemEM



Configuration of directory items > E-mail

LDAPDir.0.ItemFX



Configuration of directory items > Fax

LDAPDir.0.ItemCP



Configuration of directory items > Company

LDAPDir.0.ItemST



Configuration of directory items > Street

LDAPDir.0.ItemCT



Configuration of directory items > City

LDAPDir.0.ItemZP



Configuration of directory items > Zip

LDAPDir.0.ItemCO



Configuration of directory items > Country

LDAPDir.0.ItemAA



Configuration of directory items > Additional attribute

LDAPDir.0.IsAdditionalAttributeDialable

010: off
1: on
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Online directories - XML

Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - System - Web configurator
WebUIAccounts.1.Password

Change Password > New password (Admin)



CLI Password
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - System - Provisioning and configuration
Provisioning.global.ProvisioningServer

http://profile.gigaset.net/device/%DVID/


Provisioning and configuration > Provisioning server
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - System - Security



Accept all certificates
Security.global.HTTPAuthUsername

HTTP Authentication > HTTP digest username

Security.global.HTTPAuthPassword



HTTP Authentication > HTTP digest password
Web-interface: Settings - System - System log
DmGlobal.0.SysLogEnable010: off
1: on
DmGlobal.0.SysLogServer

Server address
DmGlobal.0.SysLogServerPort

Server port (Default 514)

StateInfo.global.DebugLevelMask

DWE
D = debug
W = warning
E = error
I = info
T = test



SNMP manager address



SNMP manager port
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - System - Date and time
DmGlobal.0.NtpServer



0.europe.pool.ntp.org,1.europe.pool.ntp.org,

2.europe.pool.ntp.org,3.europe.pool.ntp.org

DmGlobal.0.TimeZone

timezones.txt



Act as Local Time Server
Web-interface: Settings - System - Date and time



URL to firmware file



Planned schedule
Hidden Parameters
DmGlobal.0.DECTCipherDisable

> disable ciphering
0: off
1: on

DmGlobal.0.DECTEcoMode

> eco mode
0: off
1: on

DmGlobal.0.DECTEnhancedEncryption

> enhanced encryption
0: off
1: on

DmGlobal.0.DECTBlindslots

> blind slot configuration (12 slots)
bit 0x0800 = slot 0
bit 0x0001 = slot 11

DmGlobal.0.DECTAvailFrequencies

> available frequencies configuration (10 f.)
> this can be used to disable frequencies
> frequencies blocked by reg-domain will not be enabled by this setting
bit 0x0200 = channel 0
bit 0x0001 = channel 9

DmGlobal.0.DECTCfSettings

> cf mode
> bit 0..3 = number of fragments used for cf
bit 7=0: off
bit 7=1: on

DmGlobal.0.DECTTBR6Mode

> DECT TBR6 test mode
0: off
1: on

DmGlobal.0.DectEchoConfig

> DECT echo configuration mask:
bit 0x01: BS DECT echo cancellor allowed
bit 0x02: BS DECT echo suppressor allowed
bit 0x04: HS suppessor allowed
bit 0x80: force BS echo suppressor/cancellor

DmGlobal.0.NetworkEchoConfig

> BS network echo configuration:
bit 0x01: BS network suppressor on





  • No labels