Due to planned upgrade JIRA/Confluence may not be available on 6th November 2021 from 9am to 5pm CEST,
In case of any questions please don't hesitate to contact helpdesk@gigaset-devnet.pl

Page tree
Skip to end of metadata
Go to start of metadata

Generic Access Profile (GAP)

The Generic Access Profile (GAP) (ETSI standard EN 300 444) describes a set of mandatory requirements to allow any conforming  DECT Fixed Part (base) to interoperate with any conforming DECT Portable Part (handset) to provide basic telephony services when attached to a 3.1 kHz telephone network (as defined by EN 300 176-2).

The objective of GAP is to ensure interoperation at the air interface (i.e., the radio connection) and at the level of procedures to establish, maintain and release telephone calls (Call Control). GAP also mandates procedures for registering Portable Parts to a Fixed Part (Mobility Management). A GAP-compliant handset from one manufacturer should work, at the basic level of making calls, with a GAP-compliant base from another manufacturer, although it may be unable to access advanced features of the base station such as phone book synchronization or remote operation of an answering machine.

The GAP does not describe how the Fixed Part is connected to the external telephone network.

(source: wikipedia)

European Standard (Telecommunications series). ETSI. http://www.etsi.org/deliver/etsi_en/300400_300499/300444/02.01.01_60/en_300444v020101p.pdf.

  • No labels