Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Network - IP



Device name



IPv4 / IPv6



Dynamic / Static



IP address



Subnet mask



Standard gateway



Preferred DNS



Alternate DNS
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Network - LAN



VLAN tagging



VLAN identifier



VLAN priority
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Base stations - Administration
ConfirmedBaseStations.<mac>.name

Name / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT network
ConfirmedBaseStations.<mac>.ucTxPower

0

1

0 = Normal power output (Default)
1= Reduce TX power by 8dB for external antenna operation

ConfirmedBaseStations.<mac>.bActivateCell010 = Base station deactivated
1 = Activated base station (Default)
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Base stations - Synchronization

ConfirmedBaseStations.<mac>.ucCluster

110Select the cluster to which the base should be assigned to from the option menu.
ConfirmedBaseStations.<mac>.ucSyncLevel110Select the synchronization level for the base station.
ConfirmedBaseStations.<mac>.bSyncLanMaster01

0 = Off (Default)
1 = LAN Master

Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Provider or PBX profiles

VoIP ProviderValue
SipProvider.<0-9>.Name 
Connection name or number: Name for the provider or PBX profile. This name is shown in the Provider/PBX list

Phone systemValue
SipProvider.<0-9>.PhoneSystem

System:

  • Automatic (0)
  • Standard
  • Broadsoft
  • Openscape
  • Nfon
  • Swyx
  • 3CX

General data of your service providerValue
SipProvider.<0-9>.Domain
Domain: Domain part of the user address (SIP URI)
SipProvider.<0-9>.ProxyServerAddressIP address/ DNS nameProxy server address: The SIP proxy is your VoIP provider's gateway server and the first SIP server, where the device should send SIP requests and expects to receive requests
SipProvider.<0-9>.ProxyServerPort1 - 65535Proxy server port (Default 5060): Enter the port number of the first SIP server, where the device should send SIP requests and expects to receive requests.
SipProvider.<0-9>.RegServerAddressIP address/ DNS nameRegistration server: The registration server assigns the public IP address/port number that was used by the phone on registration to your SIP address (username@domain)
SipProvider.<0-9>.RegServerPort1 - 65535Registration server port (Default 5060): Enter the communication port used on the registrar.
SipProvider.<0-9>.RegServerRefreshTimer

1 - 5 digits

Registration refresh time (Default 180): Enter the time intervals (in seconds) at which the phone should repeat the registration with the VoIP server (SIP proxy)
SipProvider.<0-9>.TransportProtocol1 - 3

Transport protocol:
1 = UDP
2 = TCP
3 = TLS

SipProvider.<0-9>.UseSIPS0 - 1

Use SIP Security (SIPS):
0 = SIPS disabled (Default)
1 = SIPS enabled

SipProvider.<0-9>.SRTP_Enabled0 - 1Secure Real Time Protocol: Security (RTP) is activated for voice connections.
0 = SRTP disabled (Default)

1 = SRTP enabled
SipProvider.<0-9>.AcceptNonSRTPCalls0 - 1

Accept non-SRTP calls: Insecure calls are accepted even when SRTP is activated.
0 = Do not accept non-SRTP calls
1 = Accepts non-SRTP calls


RedundancyValue
SipProvider.<0-9>.DnsQuery0 - 1

Redundancy - DNS query: VoIP providers provide SIP server redundancy for load balancing and service reliability. SIP servers can be identified by DNS using different queries:.
0 = A
1 = SRV + A 


Failover ServerValue
SipProvider.<0-9>.FailoverServerEnabled0 -1Failover Server > Enable registration
0 = Off
1 = On
SipProvider.<0-9>.FailoverServerAddressIP address/ DNS nameRegistration server: Enter the IP address or the (fully qualified) DNS name of the failover registration server.
SipProvider.<0-9>.FailoverServerPort1- 65535Registration port (Default 5060): The communication port used on the failover registrar.

Network data of your service providerValue
SipProvider.<0-9>.OutboundProxyMode0 - 2

Outbound proxy mode:
0
= Always
2 = Never

SipProvider.<0-9>.OutboundProxyAddressIP address/ DNS nameOutbound server address:
SipProvider.<0-9>.OutboundProxyPort1 - 65535Outbound proxy port  (Default 5060)
SipProvider.<0-9>.MWISubscription0 -1

SIP SUBSCRIBE for Net-AM MWI: When activated a subscription is established for the purpose of receiving notifications about new messages on the network mailbox
0 = Do not send SIP Subscribe for MWI
1 = Send SIP Subscribe for MWI


DTMF over VoIP Connections








DTMF over VoIP Connections
SipProvider.<0-9>.AvailableCodecs18,9,8,0


0 = g711u
8 = g711a
9 = g722
18 = g729
SipProvider.<0-9>.ActiveCodecs18,9,8,00: g711u
8: g711a
9: g722
18: g729
0 = g711u
8 = g711a
9 = g722
18 = g729
SipProvider.<0-9>.RTPPtime1020, 30Length of time in milliseconds (10, 20 (Default), 30) represented by the audio data in one packet.
SipProvider.<0-9>.HoldType010 = Inactive
1 = Sendonly (Default)
SipProvider.<0-9>.CT_HoldTT_Attended010 = Attended Transfer
1 = Unattended Transfer
SipProvider.<0-9>.CT_HoldTT_Unattended01Settings for Codecs > Hold towards Transfer-Target > Unattended Transfer
SipProvider.<0-9>.CLIPSource020 = FROM
1 = PPI+FROM
2 = PAI+PPI+FROM (Default)
Call Completion on


Call Completion off


Parameter nameValue:minValue:maxWeb-interface
Web-interface: Settings - Mobile devices - Administration

Mobile device
hs.<ipui>.Ipui


hs.<ipui>.RegStatus


hs.<ipui>.DECT_AC



Authentication Code (PIN)

Personal provider data
SipAccount.<ipui>.Active


SipAccount.<ipui>.AuthName

SIP Authentication name
SipAccount.<ipui>.AuthPassword

SIP Authentication password
SipAccount.<ipui>.UserName

SIP Username
SipAccount.<ipui>.DisplayName

SIP Display name
SipAccount.<ipui>.ProviderId

VoIP provider
SipAccount.<ipui>.AuthenticateAutoAnswerCall


SipAccount.<ipui>.CLIR


SipAccount.<ipui>.CallDivert_Active


SipAccount.<ipui>.CallDivert_Delay


SipAccount.<ipui>.CallDivert_Mode


SipAccount.<ipui>.CallDivert_Target


SipAccount.<ipui>.CallWaiting


SipAccount.<ipui>.DnDActive



Online directories

hs.<ipui>.DirectAccessDir

Directory for direct access
hs.<ipui>.IntKeyDir

Corporate directory for INT key
hs.<ipui>.AutoLookupDir

Automatic look-up

LDAP authentication
hs.<ipui>.LDAPId

Selected LDAP book
hs.<ipui>.LDAPShowProviders

Show other LDAP servers
hs.<ipui>.LDAPAuthType

LDAP authorization type
hs.<ipui>.LDAPUseSIPCredentials

LDAP Use personal provider data (SIP)
hs.<ipui>.LDAPUsername

LDAP Username
hs.<ipui>.LDAPPassword

LDAP Password

Network mailbox configuration
SipAccount.<ipui>.VoiceMailMailbox

Voicemail box number / name
SipAccount.<ipui>.VoiceMailActive

Activate Voicemail box

Group pick-up

SipAccount.<ipui>.OpenScapeGroupPickupAddress

Call number or SIP name (URI)
SipAccount.<ipui>.OpenScapeGroupPickupActive

Activate group pick-up

Call manager

hs.<ipui>.CallManagerCallsVia

Accept calls directly via Call Manager

Missed calls and alarms

hs.<ipui>.SaveMissedCalls

hs.<ipui>.SaveAcceptedCalls



Missed/accepted calls count

hs.<ipui>.ShowMissedCalls



Flashing LED (MWI) for missed calls

hs.<ipui>.ShowMissedAlarms



Flashing LED (MWI) for missed alarms

hs.<ipui>.ShowMissedNetAM



Flashing LED (MWI) for network mailbox

CSTA

SipAccount.<ipui>.CSTA_Username

Username
SipAccount.<ipui>.CSTA_AuthName

Authentication name
SipAccount.<ipui>.CSTA_AuthPassword

Authentication password
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Mobile devices - Registration Center




Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - VoIP
DmGlobal.0.Port165535SIP port (Default 5060)
Secure

Secure SIP port (Default 5061)
DmGlobal.0.Timers_T1

SIP timer T1 (Default 500)
DmGlobal.0.Timers_Session

SIP session timer (Default 1800)
DmGlobal.0.Timers_FailedRegistration

Failed registration retry timer (Default 300)
DmGlobal.0.Timers_Subscription

Subscription timer (Default 1800)
DmGlobal.0.PRACK010 = PRACK disabled
1 = PRACK enabled



SIP Security Password

DmGlobal.0.QoS_SIP_DSCP



SIP ToS / DiffServ (Default 34)

DmGlobal.0.QoS_RTP_DSCP



RTP ToS / DiffServ (Default 46)
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - Audio
DmGlobal.0.WidebandEnabled010 = Wideband with codec G.722 disabled
1 = Wideband with codec G.722 disabled
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - Call settings

Telephony.0.CT_ViaRKey

010: off
1: on

Telephony.0.CT_ByOnHook

010: off
1: on

Telephony.0.CT_AutoDetermineAddress

010: off
1: on

Telephony.0.AccessCode



Access Code

Telephony.0.AccessCodeFor



0 = Outgoing calls list
1 = Incoming calls list
2 = LDAP
3 = Local directory
4 = Public net directory
5 = Dial editor 

AreaCodes.0.Country

Germany


Country

AreaCodes.0.Int_Prefix

0
International Prefix

AreaCodes.0.Int_Code

49
International Area code

AreaCodes.0.Local_Prefix

0
Local Prefix

AreaCodes.0.Local_Code



Local Area code

Telephony.0.ToneScheme

Germany


Tone scheme
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Online directories - Public

XMLDir.0.ProviderName

Public


Directory name

XMLDir.0.ServerURL



Server address

XMLDir.0.Username



Username

XMLDir.0.Password



Password
Netdir.4.Activated

Enable Public White Pages



Maximum number of entries

XMLDir.0.WhitePagesDirName



Directory name

XMLDir.0.StartWithListWP

010: off
1: on
Netdir.5.Activated

Enable Public Yellow Pages

XMLDir.0.YellowPagesDirName



Directory name

XMLDir.0.StartWithListYP

010: off
1: on
Netdir.6.Activated

Enable Public Private Pages

XMLDir.0.PrivatePagesDirName



Directory name

XMLDir.0.StartWithListPP

0
0: off
1: on
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Online directories - Corporate

LDAPDir.0.DirName



LDAP Directory name
Netdir.0.Activated

LDAP Enable directory

LDAPDir.0.ServerURL



LDAP Server address

LDAPDir.0.ServerPort

165535LDAP Server port (Default 389)

LDAPDir.0.BaseDN



LDAP Search base (BaseDN)

LDAPDir.0.UseIndividualCredentials

010: off
1: on

LDAPDir.0.Username



LDAP Username

LDAPDir.0.Password



LDAP data server Password

LDAPDir.0.StartWithList

010: off
1: on

LDAPDir.0.NameFilter

(|(cn=%)(sn=%))


LDAP Name filter

LDAPDir.0.NumberFilter

(|(telephoneNumber=%)(mobile=%))


LDAP Number filter

LDAPDir.0.AdditionalFilter1Name

City


LDAP Additional filter #1 name

LDAPDir.0.AdditionalFilter1

(|(l=%))


LDAP Additional filter #1 value

LDAPDir.0.AdditionalFilter2Name

Street


LDAP Additional filter #2 name
LDAPDir.0.AdditionalFilter2

(|(street=%))


LDAP Additional filter #2 value

LDAPDir.0.DisplayName

%sn, %givenName


LDAP Display format

LDAPDir.0.MaxNrOfSearchEntries

50
LDAP Max. number of search results

LDAPDir.0.ItemFN



Configuration of directory items > First name

LDAPDir.0.ItemLN



Configuration of directory items > Surname

LDAPDir.0.ItemPH



Configuration of directory items > Phone (home)
LDAPDir.0.ItemPO

Configuration of directory items > Phone (office)
LDAPDir.0.ItemPM

Configuration of directory items > Phone (mobile)

LDAPDir.0.ItemEM



Configuration of directory items > E-mail

LDAPDir.0.ItemFX



Configuration of directory items > Fax

LDAPDir.0.ItemCP



Configuration of directory items > Company

LDAPDir.0.ItemST



Configuration of directory items > Street

LDAPDir.0.ItemCT



Configuration of directory items > City

LDAPDir.0.ItemZP



Configuration of directory items > Zip

LDAPDir.0.ItemCO



Configuration of directory items > Country

LDAPDir.0.ItemAA



Configuration of directory items > Additional attribute

LDAPDir.0.IsAdditionalAttributeDialable

010: off
1: on
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Online directories - XML

Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - System - Web configurator
WebUIAccounts.1.Password

Change Password > New password (Admin)



CLI Password
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - System - Provisioning and configuration
Provisioning.global.ProvisioningServer

http://profile.gigaset.net/device/%DVID/


Provisioning and configuration > Provisioning server
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - System - Security



Accept all certificates
Security.global.HTTPAuthUsername

HTTP Authentication > HTTP digest username

Security.global.HTTPAuthPassword



HTTP Authentication > HTTP digest password
Web-interface: Settings - System - System log
DmGlobal.0.SysLogEnable010: off
1: on
DmGlobal.0.SysLogServer

Server address
DmGlobal.0.SysLogServerPort

Server port (Default 514)

StateInfo.global.DebugLevelMask

DWE
D = debug
W = warning
E = error
I = info
T = test



SNMP manager address



SNMP manager port
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - System - Date and time
DmGlobal.0.NtpServer



0.europe.pool.ntp.org,1.europe.pool.ntp.org,

2.europe.pool.ntp.org,3.europe.pool.ntp.org

DmGlobal.0.TimeZone

timezones.txt



Act as Local Time Server
Web-interface: Settings - System - Date and time



URL to firmware file



Planned schedule
Hidden Parameters
DmGlobal.0.DECTCipherDisable

> disable ciphering
0: off
1: on

DmGlobal.0.DECTEcoMode

> eco mode
0: off
1: on

DmGlobal.0.DECTEnhancedEncryption

> enhanced encryption
0: off
1: on

DmGlobal.0.DECTBlindslots

> blind slot configuration (12 slots)
bit 0x0800 = slot 0
bit 0x0001 = slot 11

DmGlobal.0.DECTAvailFrequencies

> available frequencies configuration (10 f.)
> this can be used to disable frequencies
> frequencies blocked by reg-domain will not be enabled by this setting
bit 0x0200 = channel 0
bit 0x0001 = channel 9

DmGlobal.0.DECTCfSettings

> cf mode
> bit 0..3 = number of fragments used for cf
bit 7=0: off
bit 7=1: on

DmGlobal.0.DECTTBR6Mode

> DECT TBR6 test mode
0: off
1: on

DmGlobal.0.DectEchoConfig

> DECT echo configuration mask:
bit 0x01: BS DECT echo cancellor allowed
bit 0x02: BS DECT echo suppressor allowed
bit 0x04: HS suppessor allowed
bit 0x80: force BS echo suppressor/cancellor

DmGlobal.0.NetworkEchoConfig

> BS network echo configuration:
bit 0x01: BS network suppressor on





  • No labels