You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Introduction

The Link Layer Discovery Protocol (LLDP) is a vendor-neutral link layer protocol in the Internet Protocol Suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, principally wired Ethernet. 

  • LLDP is by default enabled on the Maxwell
  • LLDP configuration is done on the Switch and not the Maxwell



Web-interface

You can change the following settings in the Maxwell Web-interface:

  • Enable LLDP
  • Packet Interval

Go to: Settings - Network - LAN - LLDP

  • No labels