Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Next »

= supported= supported and tested= Not supported
uaCSTA Call Control Profile (See document below)Platforms

Estos3CXMondago

ServicesN670/870
2.17.2

Yealink

SnomMitelN670/870N670/870

 The following CSTA services are included in the Basic uaCSTA Call Control Profile:







Alternate Call – Places an existing call on hold and retrieves a previously held call at a UA.


Answer call – Answers an alerting call at a UA.

EIN2-6665 - Getting issue details... STATUS

EIN2-6665 - Getting issue details... STATUS




Clear Connection – Clears a connection at a UA.

EIN2-6665 - Getting issue details... STATUS

EIN2-6665 - Getting issue details... STATUS




Conference Call - Initiate a conference via a remote controlling client


Single Step Conference Call – Adds another device to an existing call at a UA in one step.




Consultation Call – Places an existing call on hold at the UA and initiates a new call from the UA.

EIN2-5624 - Getting issue details... STATUS





Deflect Call – Moves a connection away from a deflecting UA. A deflecting UA is no longer involved with the call after the Deflect Call service is completed.

EIN2-5625 - Getting issue details... STATUS





Hold Call – Holds a call at a holding UA.

EIN2-5626 - Getting issue details... STATUS





Make Call – Makes a call from an originating UA.


Reconnect Call – Clears an existing connected call and retrieves a call on hold at a UA.

EIN2-5627 - Getting issue details... STATUS







Retrieve Call – Retrieves a call at a retrieving UA.

EIN2-5628 - Getting issue details... STATUS





Single Step Transfer – Transfers a call to another device in a single step. A transferring UA is no longer involved with the call after the Single Step Transfer service is completed.

EIN2-6665 - Getting issue details... STATUS





Transfer Call – Merges two calls at the UA into one call. As a result of the Transfer, the device is no longer involved with the call.

EIN2-5621 - Getting issue details... STATUS





Monitor Start – Establishes a device-type monitor on a UA.


Monitor Stop – Terminates an existing monitor.



Set Forwarding - Set device Call Forwarding settings via controlling Client



Get Forwarding - Inform the controlling Client about the device call forwarding setting



Set DND - Set device DND settings via controlling Client


Get DND - Inform the controlling Client about the device DND setting


GetMessageWaitingindicator





GenerateDigits - Dial DTMF Tones during a call via a remote controlling client



DialDigits - Dials the digital tones for a phone call.



Monitoring Services and Events - Receive all call information in real time in regards to the feature mentioned above





Set Speaker Mute – Sets the speaker mute feature status at a UA. This is a CSTA physical device feature





Set Speaker Volume – Sets the speaker volume feature status at a UA. This is a CSTA physical device feature





SystemRegister - Subscribes to notifications of configuration changes.



SystemRegisterCancel - Unsubscribes from notifications for configuration changes.



Snapshotdevice - Consistency check

EIN2-6666 - Getting issue details... STATUS




SnapShotCall - Consistency check



DirectedPickupCall - Picks up a call from another participant



GetSwitchingFunctionDevices - Checks the configured identities.





RequestSystemStatus - Checks the telephone status.

Events






The following CSTA events are included in the Advanced uaCSTA Call Control Profile:







Originated – For an outbound call, indicates that an originating UA is connected to the call.






Connection Cleared – Indicates that a UA has disconnected from a call.






Delivered – Indicates that a call is alerting a UA.






Diverted – Indicates that a UA has redirected a call to another device and is no longer involved with the call.






Established – Indicates that a UA has answered or has been connected to a call.






Failed – Indicates that a call cannot be completed (e.g. call has encountered a busy device).






Held – Indicates that a call at a UA is on hold.






Network Reached – For an outbound call, indicates that a call has been connected to an external network via a Network Interface Device.






Retrieved – Indicates that a call at a UA has been retrieved.






Service Initiated – Indicates that a call is prompting the originating UA to go off hook (part of a CSTA Make Call service) or the UA is requesting service.






Transferred – Indicates that a call at the UA has been transferred to another location.






Conferenced – Indicates that a conference call has been created at a UA.






Do Not Disturb – Indicates that the DND feature status has changed at a UA.






Forwarding – Indicates that the forwarding feature status has changed at a UA






Speaker Mute – Indicates that the speaker mute feature status has changed at a UA.






Speaker Volume – Indicates that the speaker volume feature status has changed at a UA.






DigitsGenerated






OutOfService






BackInService







  • No labels