Due to planned upgrade JIRA/Confluence may not be available on 30th October 2021 from 10am to 6pm CEST,
In case of any questions please don't hesitate to contact helpdesk@gigaset-devnet.pl

Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Introduction

The following Licenses are available.

  • Integrator - DECT Manager license
  • Upgrade N670 to N870 (Planned)

The Integrator is available in 2 versions.

  1. Embedded Integrator (Up to 4 DECT Managers)
  2. Virtual Integrator (Up to 100 DECT managers)

Each integrator when installed contains one DECT manager License.

If you need to add more DECT managers then you need to add a License.

The License is based on the N870 hardware MAC address.

How to add a License.

  1. Define the Master DECT Manager
  2. Download the License file
  3. Buy a License using the license file
  4. Upload the new License

Grace period.

You can use the system without any license for 35 days, after this, the system will limit the web-interface and no handsets can be add/changed/deleted.

Only the pages that you need to fix the license will be available.

The system will stay functional.

After a factory reset, the system can be used again for 35 days without any license.

Service.

If the license is not valid anymore due to:

  • Master DECT manager is broken and is replaced, therefore the license is not valid anymore.

You will have 35 days to request a new License file, see the grace period.


Today, the license file procedure is a manual procedure. The online process is under development.

Master DECT manager

Only needed when the Virtual Integrator is used.

As the license is based on the N870 MAC address and the Virtual Integrator is not an N870 device, you need to define the Master DECT manager.

In the Integrator web-interface go to SETTINGS - DECT manager - Administration - Global settings

Select the Master DECT Manager.

The Master DECT manager need to be installed, connected and working as the real MAC address of this device is retrieved.

Download the License file

To request a new License, you first need to download the license file from the device.

The license file contains basic information about the system like:

  • Hardware information (MAC address of Master DECT manager)
  • Software version
  • Number of connected DECT managers / Base stations / handsets
  • Country selection
  • Data and time

The file content is encrypted.

In the Integrator web-interface go to SETTINGS - DECT manager - Administration - Global settings

Select the Master DECT Manager.

...


  • No labels