You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Next »

LocaPhone

About Locanet

LocaPhone VoIP PBX as a software-based VoIP system delivers a number of unparalleled advantages.

Substantial cost reduction - Combined with IP telephones and DECT solutions from Gigaset PRO & others, and media gateway telephony hardware offered by different manufacturers, LocaPhone VoIP PBX provides a fully featured PBX system at a fraction of the price of traditional PBX systems, while providing a level of functionality exceeding that of many of the most expensive systems available.

No licensing scheme, no limitations on functions and users, and no proprietary hardware (multiple vendors possible) is used.

Because of its "open" nature LocaPhone VoIP PBX eliminates further vendor lock-in and offers a choice to the customer to use the desired or necessary telephony hardware for its exact setting.

More information on http://www.locaphone.de

LocaPhoneTested on LocaPhone VoIP PBX version : 5.3.1-precise1

See below for a list with supported features when using the Gigaset PRO IP Devices with LocaPhone VoIP PBX.


Feature                                       

DE310 /
DE410 IP PRO 

EOL

DE700 / DE900 IP PRO 

EOL

Maxwell
Basic/2/3		N510 IP PRO     N720 IP PRO    N870 IP PRO
Software release:  2.00.0502.00.082.25.642.25070.1132.20
Basic CallYesYesPendingYesYesPending
Calling line (CLIP)YesYes
YesYes
Connected line (COLP)YesYes
YesYes
Anonymous call ( *31+number )YesYes
YesYes
Do Not DisturbYesYes
N/AN/A
Message waitingYesYes
YesYes
Call list/historyYes(1)Yes(1)
YesYes
Voice mail deposit/retrievalYesYes
YesYes
Call waitingYes(2)Yes(2)
Yes(2)Yes(2)
Call Hold / ToggleYesYes
YesYes
Call forward (CFU)Yes(3)Yes
YesYes
Call forward (CFNR)Yes(3)Yes
YesYes
Call forward (CFB)Yes(3)Yes
YesYes
Call Transfer attendedYesYes
YesYes
Call Transfer unattendedYesYes
YesYes
DTMF (RFC2833)YesYes
YesYes
Conference 3ptyYesYes
YesNo
BLF Busy / Idle indicationYesYes
N/AN/A
Call pick-up direct  ( * 81 extension)YesYes
YesYes
Call pick-up group ( * 8 )NoNo
NoNo
Call pick-up BLFYesYes
N/AN/A
Call completed elsewhereNo(4)No(4)
No(4)No(4)
Auto provisioningYesYes
Under developmentUnder development

(1) Does not show the usual missed call icon on display, instead MWI will blink. Pressing the MWI button will show the missed call list.

(2) Call waiting status can not be changed via the phone menu. Instead *92 can be used to activate call waiting and * 92* can be used to disable call waiting.

(3) Could not be configured via the phone menu but can be configured on the platform.

(4) Platform does not send call completed elsewhere. However the provisioned phones(DExxx models) did not show a missed call.

(5) 'do not disturb' status can not be changed via the phone menu. Instead a PBX Web-UI setting or feature code

( '*93' to activate call waiting, '* 93*' disable call waiting) can be used.

** When a call has been on hold for about 3 minutes and 30 seconds the platform disconnects both users.


Full list of available feature codes.

  • No labels