You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Introduction

This page describes how the Gigaset Maxwell devices are provisioned behind the Yeastar S20.

  • Yeastar S20 software 30.6.0.20
  • Yeastar auto-provisioning app version 1.5.35
  • Maxwell 2.22.7

Yeastar is using tftp for provisioning which is supported by the Maxwell Basic/2 and 3. The Gigaset DECT devices do not support tftp.

The Yeastar will send a SIP NOTIFY with Event: check-sync;reboot=true to start provisioning, this means that the device is rebooted to trigger the provisioning. The reboot is a Yeastar requirement as Gigaset devices do not need a reboot.

Yeastar settings

Open the Yeastar Auto provisioning app and it shows you a list with devices.


Click on Edit to start with the device configuration

Account settings

Here you can define up to 4 (SIP) accounts

Features


  • No labels