You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Introduction

The Fusion can connect to the local network via:

  • Ethernet (2x Gbit ports, PoE support)
  • Wi-Fi (802.11 ac dual band)


When the Fusion is connected to the network via Wi-Fi, it is not possible to use the Ethernet ports.

Web-interface

Open the web-interface and go to: Settings - Network - Wi-Fi

Enable Wi-Fi

When enabled, you will see the available Wi-Fi networks, select the network you want to use. 

or Click on  to add the network manually.

Fusion MMI

On the Fusion device go to: Menu - Settings - Network

Select Wi-Fi

Enter the admin password

Select the network you want to use or click  to Add the network manually 

  • No labels