You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Introduction

From software 2.68 or higher we have implemented the option to select the outgoing line (Only if more then 1 outgoing line is available)


To be able to use this feature you need to enable this via:

Mobile devices - Line selection

Softkey Sel. Line

Select Line via pressing the Softkey "Sel. Line"

  • Long press on the required Softkey
  • Select More Functions...
  • Select Line Selection
  • Press OK to save


  • Press Sel.Line
  • Select the required outgoing Line
  • Enter the number

  • No labels