You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Introduction

With software ... we have improved the role change via the hardware key on the Nx70, the following is improved:

  • Acknowledge the role change by pressing the hardware key for some seconds is signaled via the LED
Example how to switch from Base to All in one role
ActionNew Old
Press hardware key for 10 seconds until both LED's are switched off.

Release hardware key and right LED is GREEN.

Role is DECT Base

Press hardware key and both LED's will be BLUE.

Role is All in one

Press hardware key for 5 seconds to confirm the new role.

With new software, after 4 seconds the role is automatic
acknowledged and LED's turn RED.

With old software, you do not see any LED indication that the
new role is acknowledged.

Device will start booting

  • No labels