Page tree
Skip to end of metadata
Go to start of metadata
Introduction

By default a Gigaset device will connect automatically once a day to the provisioning server, you can change the timer via auto-provisioning to connect more often.



N510 IP PRO
Auto provisioning parameterValueMeaning
BS_IP_Data1.uiI_CHECK_FOR_UPDATES_TIMER_INITintegerIf it's set to 0, the version check will be started at night (between 2 o'clock and 6 o'clock). If the switch is unequal 0, the version check will be started depending by the set value e.g. 600 minutes means every 10 hours.

Example:

<SYMB_ITEM ID="BS_IP_Data1.uiI_CHECK_FOR_UPDATES_TIMER_INIT" class="symb_item" value="0x5"/>


In this example we change the time from once every day to every 5 minutes. (Minimum time allowed)


 N510 xml configuration example

<?xml version="1.0" encoding="ISO-8859-1"?>
<ProviderFrame xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="profile.xsd">
<Provider>
<MAC_ADDRESS value="7C2F8030D21E"/>
<PROFILE_NAME class="string" value="n510_test"/>

<SYMB_ITEM ID="BS_IP_Data1.aucS_SIP_DOMAIN" class="symb_item" value='"192.168.178.120"'/>
<SYMB_ITEM ID="BS_IP_Data1.ucB_SIP_ACCOUNT_IS_ACTIVE_1" class="symb_item" value="1"/>
<SYMB_ITEM ID="BS_IP_Data3.aucS_SIP_LOGIN_ID" class="symb_item" value='"test3"'/>
<SYMB_ITEM ID="BS_IP_Data1.aucS_SIP_REGISTRAR" class="symb_item" value='"192.168.178.120"'/>
<SYMB_ITEM ID="BS_IP_Data1.aucS_SIP_USER_ID" class="symb_item" value='"test3"'/>
<SYMB_ITEM ID="BS_IP_Data1.aucS_SIP_PASSWORD" class="symb_item" value='"test3"'/>
<SYMB_ITEM ID="BS_Accounts.astAccounts[0].aucAccountName[0]" class="symb_item" value='"Timer"'/>
<SYMB_ITEM ID="BS_IP_Data1.aucS_SIP_SERVER" class="symb_item" value='"192.168.178.120"'/>
<SYMB_ITEM ID="BS_IP_Data1.aucS_SIP_DISPLAYNAME" class="symb_item" value='"test"'/>

<!-- Needed to enable Provisioning, After Reboot -->
<SYMB_ITEM ID="BS_IP_Data.ucB_AUTO_UPDATE_PROFILE" class="symb_item" value="0x1"/>
<SYMB_ITEM ID="BS_IP_Data3.ucI_ONESHOT_PROVISIONING_MODE_1" class="symb_item" value="0x1"/>

<!-- Change the time the device connects automatically, in this example every 5 minutes.
If it's set to 0, the version check will be started at night (between 2 o'clock and 6 o'clock)-->
<SYMB_ITEM ID="BS_IP_Data1.uiI_CHECK_FOR_UPDATES_TIMER_INIT" class="symb_item" value="0x5"/>

</Provider>
</ProviderFrame>



N720 IP PRO
Auto provisioning parameterValueMeaning
BS_IP_Data.uiI_CHECK_FOR_UPDATES_TIMER_INITintegerIf it's set to 0, the version check will be started at night (between 2 o'clock and 6 o'clock). If the switch is unequal 0, the version check will be started depending by the set value e.g. 600 minutes means every 10 hours. (Minimum allowed time is 5 minutes.

For an example, please look at the N510 example.



Maxwell Basic, 2 and 3
Auto provisioning parameterValueMeaning
System.Provision.Period600 - 86400

0 (Default) =  Random value between 1:00 and 4:00 am

Minimum time is 600 seconds.
If you configure the time < 600 and > 0 then it can be that during manual testing provisioning, the
device will wait until the 600 seconds are passed and with the correct setting this will not happen. 

Example:

<param name="System.Provision.Period" value="3600"/>



Maxwell 10
Auto provisioning parameter
ValueMeaning
B_AUTO_PROFILECHECK_ACTIVATE0: No
1: Yes  (default)
Automatic check for profile updates. WebUI: Settings->System->Firmware Update: Automatic check for profile updates(Checkbox: Yes/No)
I_CHECK_UPDATE_METHOD0: To check update once at a random time per day
1: To check update at a specified time (once per day)
2: To check update in the time interval (multiple times per day)
To specify the timing to check update

I_CHECK_UPDATE_TIME

Not implemented, will come soon

1~1440; minutes after 00:00 in one single day; 1440 means  00:00 (but not 00:00 of the next day)
Note: it is only available if I_CHECK_UPDATE_METHOD is equal to "1".
To specify a time to check update

I_CHECK_UPDATE_INT

Not implemented, will come soon

15~720; time interval in minutes starting at 00:00
Note: it is only available if I_CHECK_UPDATE_METHOD is equal to "2".
Minimum time is 15 minutes.
 Maxwell 10 XML example connect every 16 minutes

<?xml version="1.0" encoding="ISO-8859-1"?>
<ProviderFrame>
<Provider>
<MAC_ADDRESS value="7C:2F:80:8E:71:FF"/>
<VERSION value="20150224130609"/>
<PROFILE_NAME class="string" value="PBX"/>

<B_AUTO_PROFILECHECK_ACTIVATE class="boolean" value="1"/>
<I_CHECK_UPDATE_INT class="integer" value="16"/>
<I_CHECK_UPDATE_METHOD class="integer" value="2"/>

</Provider>
</ProviderFrame>

 Maxwell 10 XML example connect at 13:50

<?xml version="1.0" encoding="ISO-8859-1"?>
<ProviderFrame>
<Provider>
<MAC_ADDRESS value="7C:2F:80:8E:71:FF"/>
<VERSION value="20150224130609"/>
<PROFILE_NAME class="string" value="PBX"/>

<B_AUTO_PROFILECHECK_ACTIVATE class="boolean" value="1"/>
<I_CHECK_UPDATE_METHOD class="integer" value="1"/>
<I_CHECK_UPDATE_TIME class="integer" value="830"/>

</Provider>
</ProviderFrame>

  • No labels