Page tree
Skip to end of metadata
Go to start of metadata
Introduction

Once a Gigaset device is auto provisioned, you can trigger the device to download the configuration file again without a restart / reset. For this you need to use the web-interface of the device.



N510 IP PRO

In the web-interface go to: Settings - Telephony - Connections and press "Update profile"


 N510 web-interface start provisioning.



N720 IP PRO

In the web-interface go to: Settings - Management - Miscellaneous and press "Start auto configuration" or "Update profile" this depends on the settings of the device.


 N720 web-interface start provisioning



Maxwell Basic, 2 and 3

In the web-interface go to: Settings - System - Provisioning and Configuration and press "Start Auto Configuration"


 Maxwell web-interface start provisioning.



Maxwell 10

In the web-interface go to: Settings - System and press "Autoprovisioning"

The URL should point to your provisioning server.

Click on Start


 Maxwell 10 web-interface start provisioning.

  • No labels