Versions Compared

Old Version 2

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 3

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleIntroduction

This page describes how the Gigaset Maxwell devices are provisioned behind the Yeastar P-series. 

For this wiki article, we used:

  • Yeastar P550
  • Maxwell devices



Panel
titleColor#F85404
titleBGColor#F0F0F0
titleFirst steps to connect Nx70a Maxwell device
  1. Start with an factory default Nx70Maxwell.
  2. During boot the Nx70 Maxwell will send a SIP multicast and the device will be visible in the Yeastar web-interface.

    Image Added


3. Via the Edit button  configure your device


IP Phone
Expand
titleIP Phone

Image RemovedImage Added

Automatic selected by Yeastar based on the user-agent. 

Options
Expand
titleOptions

Image RemovedImage Added

Yeastar offers a default provisioning template for a device. Custom templates can be created and if available, it will be visible here.

Assign Extension
Expand
titleAssign Extension

Image RemovedImage Added

Select the handsets and assign it Assign the Maxwell to an Extension. Limited by Yeastar: up to 50 DECT handsets per device

Preference
Expand
titlePreference

  • Phone Web Language of the N870/N670
  • N870/N670 Tone selection: SETTINGS - Telephony - Call settings - Tone selection
  • Phone Password: The N870/N670 web-interface admin login password
  • Primary NTP server: SETTINGS - System - Date and Time - Time server
  • Time Zone: SETTINGS - System - Date and Time - Time zone


4. Save the configuration

5. The Yeastar should inform the N870/N670 about a new configuration and provisioning should be started. If this does not work then:

a. Download the provisioning file from the Yeastar web-interface.

b. Search for the provisioning URL in the file: Example: 
<!-- Provisioning URL -->
<param name="Provisioning.global.ProvisioningServer" value="http://192.168.3.150:7778/api/autoprovision/4HTPrDkJ0MZXwKqC/589ec62904f3.xml"/>

c. Copy the URL in the N870/N670 (SETTINGS - System - Provisioning and Configuration) and start provisioning.



Panel
titleColor#F85404
titleBGColor#F0F0F0
titleFirmware update

In the Yeastar web-interface go to: Auto provisioning - Resource Repository - Device firmware and upload the new firmware like the example below.

Go back to Phones and select your device and click on 


...