Page History

...

Info

Use PNG Mode for BGR 139-compliant operation and observe the settings prescribed there.

At least one automatic alarm has to be activated here in addition to the manual alarm.

It is not possible to switch off all alarms in PNG Mode.

General Settings

These values are used in general for all alarm types within an operating mode.

...

Parameters	Basic mode	Alarm mode	PNG mode
Alarm number(s) / Alarm Destination	Alarm Destination 1 <empty>	-	-
	Alarm Destination 2 <empty>	-	-
	Alarm Destination 3 <empty>	-	-
	LP Alarm Destination 1 <empty>	-	-
	LP Alarm Destination 2 <empty>	-	-
	LP Alarm Destination 3 <empty>	-	-
Alarm repeat counter	99	-	-
Calling Time	30 sec	-	-
Audio Channel	Handset	Handset	Handset

Manual alarm

You can configure all settings here for the manual alarm, in other words for the alarm triggered with the red alarm key.

Depending on how the red alarm key is pressed (SP: Short press, LP: Long press), different alarms are signaled (Alarm/PNG) and different alarm destinations are dialed (Basic).

Procedure:

Select the Additional Features icon in the main menu.
Select Configuration.
Enter the five-position service PIN and confirm with OK.
Select one of the three operating modes.
Select Alarms.
Select Manual Alarm.
Change the values of the following parameters:

Parameters	Basic mode	Alarm mode	PNG mode
Alarm Key
Short press	On	On	On
Long press	On	On	On
Multiple press	Off	Off	Off
Keypad Locked	Key active	Key active	Key active
Delay	0 sec. <10-900 sec>	0 sec. <10-900 sec>	0 sec. <10-90 sec>
Melody SP	Alarm 5	Alarm 5	Alarm 5
Melody LP	Alarm 6	Alarm 6	Alarm 6
Volume	3	3	3
Some menus are missing

Page tree

Versions Compared

Old Version 3

New Version 4

Key

General Settings

Manual alarm