Versions Compared

Old Version 5

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 6

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select General Settings.
  7. Change the values of the following parameters:


ParametersBasic modeAlarm modePNG mode
Alarm number(s) / Alarm DestinationAlarm Destination 1 <empty>--

Alarm Destination 2 <empty>--

Alarm Destination 3 <empty>--

LP Alarm Destination 1 <empty>--

LP Alarm Destination 2 <empty>--

LP Alarm Destination 3 <empty>--
Alarm repeat counter99--
Calling Time30 sec--
Audio ChannelHandsetHandsetHandset

...

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Manual Alarm.
  7. Change the values of the following parameters:

ParametersBasic modeAlarm modePNG mode
Alarm Key


  • Short press
OnOnOn
  • Long press
OnOnOn
  • Multiple press
OffOffOff
Keypad LockedKey activeKey activeKey active
Delay

0 sec.

<10-900 sec>

0 sec.

<10-900 sec>

0 sec.

<10-90 sec>

Melody SP Alarm 5Alarm 5Alarm 5
Melody LPAlarm 6Alarm 6Alarm 6
Volume333
Some menus are missing

...

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Non Movement Alarm.
  7. Change the values of the following parameters:


ParametersBasic modeAlarm modePNG mode
ActivationOnOnOn
Response Time

90 sec.

<10-900 sec>

90 sec.

<10-900 sec>

90 sec.

<10-90 sec>

Pre-alarm Time

15 sec.

<0-300 sec>

15 sec.

<0-300 sec>

15 sec.

<0-30 sec>

Sensitivity levelHighHighHigh


Man Down Alarm

The Man Down Alarm can be activated optionally. It is triggered if the sensors identify undue tilting of the handset over a defined configurable period of time (i.e. deviation from the vertical position).

...

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Man Down Alarm.
  7. Change the values of the following parameters:


ParametersBasic modeAlarm modePNG mode
ActivationOnOnOn
Response Time

90 sec.

<10-900 sec>

90 sec.

<10-900 sec>

90 sec.

<10-90 sec>

Pre-alarm Time

15 sec.

<0-300 sec>

15 sec.

<0-300 sec>

15 sec.

<0-30 sec>

Sensitivity levelHighHighHigh


Time Alarm

The Time Alarm can be activated optionally. It is triggered if a timed alarm is not acknowledged in time by the user.

Procedure:

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Time Alarm.
  7. Change the values of the following parameters:


ParametersBasic modeAlarm modePNG mode
ActivationOffOffOff
Response Time

15 min.

<1-120 min.>

15 min.

<1-120 min.>

15 min.

<1-15 min.>

Pre-alarm Time

15 sec.

<0-300 sec>

15 sec.

<0-300 sec>

15 sec.

<0-15 sec>


Escape Alarm

The Escape Alarm can be activated optionally. It is triggered if the sensors identify undue violent movement of the handset over a defined configurable period of time.

Procedure:

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Escape Alarm.
  7. Change the values of the following parameters:


ParametersBasic modeAlarm modePNG mode
ActivationOffOffOff
Response Time

30 sec.

<10-900 sec>

30 sec.

<10-900 sec>

30 sec.

<10-90 sec>

Pre-alarm Time

15 sec.

<0-300 sec>

15 sec.

<0-300 sec>

15 sec.

<0-30 sec>

Sensitivity levelHighHighHigh


Alarm Signal

You can define the acoustic signaling of pre-alarms and alarms here. The following signals start quietly and reach their configured maximum value after a short time.

Procedure:

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Alarm Signal.
  7. Select Pre-alarm or Alarming Signal.
  8. Change the values of the following parameters:


ParametersBasic modeAlarm modePNG mode
Pre-alarm


  • Warning Signal
OnOnOn
  • Alarm Ringtone
Alarm 5Alarm 5Alarm 5
  • Volume
333
Alarming Signal


  • Alarm Signal
OnOnOn
  • Alarm Ringtone
Alarm 1Alarm 1Alarm 1
  • Volume
555