Introduction

This page describes how the Gigaset Maxwell devices are provisioned behind the Yeastar S20.

• Yeastar S20 software 30.6.0.20
• Yeastar auto-provisioning app version 1.5.35
• Maxwell 2.22.7

Yeastar is using tftp for provisioning which is supported by the Maxwell Basic/2 and 3. The Gigaset DECT devices do not support tftp.

The Yeastar will send a SIP NOTIFY with Event: check-sync;reboot=true to start provisioning, this means that the device is rebooted to trigger the provisioning. The reboot is a Yeastar requirement as Gigaset devices do not need a reboot.

Expansion modules are current not supported by Yeastar, possible in the future. You can configure them via the web-interface of the Maxwell.

Yeastar settings

Open the Yeastar Auto provisioning app and it shows you a list with devices.

Image RemovedYeastar S20

Click on Edit to start with the device configuration

Account settings

Image RemovedYeastar S20

Here you can define up to 4 (SIP) accounts

Function Key settings

Only valid for Maxwell 2 and 3

Image RemovedYeastar S20

Features

Image RemovedYeastar S20

Preference

Image Removed

Yeastar S20

Yeastar feature	Maxwell	Provisioning
Webserver Type	System - Phone Web Server	HTTP.ConnectionType
Language		WebUI.Language
Admin Password		WebUI.AdminPassword
Time Zone	System - Date and Time	System.DateAndTime.TimeZone
Primary NTP Server	System - Date and Time	System.DateAndTime.TimeServer
Automatically adjust clock for daylight saving changes	System - Date and Time	System.DateAndTime.AutoAdjustClockForDST
Time Format	System - Date and Time	System.DateAndTime.TimeFormat
Date Format	System - Date and Time	System.DateAndTime.DateOrder

Codec

Yeastar S20