You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Introduction

This page describes how the Gigaset Maxwell devices are provisioned behind the Yeastar S20.

  • Yeastar S20 software 30.6.0.20
  • Yeastar auto-provisioning app version 1.5.35
  • Maxwell 2.22.7

Yeastar is using tftp for provisioning which is supported by the Maxwell Basic/2 and 3. The Gigaset DECT devices do not support tftp.

The Yeastar will send a SIP NOTIFY with Event: check-sync;reboot=true to start provisioning, this means that the device is rebooted to trigger the provisioning. The reboot is a Yeastar requirement as Gigaset devices do not need a reboot.

Expansion modules are current not supported by Yeastar, possible in the future. You can configure them via the web-interface of the Maxwell.

Yeastar settings

Open the Yeastar Auto provisioning app and it shows you a list with devices.


Click on Edit to start with the device configuration

Account settings

Here you can define up to 4 (SIP) accounts

Function Key settings

Only valid for Maxwell 2 and 3

Features

Yeastar featureMaxwellProvisioning
Call WaitingTelephony - Call Settings - Call Waiting - Display waiting callSIP.Account.x.CallWaiting
VoicemailTelephony - Voicemail - ActiveSIP.Account.x.VoiceMail.Active
Local Phone BookSee wiki article.

</custom>
<step type="LocalPhoneBook" url="tftp://192.168.178.210/phonebook/gigaset.xml"/>
</custom>

You need to define the phonebook on the Main page of Yeastar Auto provisioning - Phonebook
Transport ProtocolTelephony - VoIPSIP.TransportProtocol
SIP via TLSTelephony - VoIPSIP.Security.UseSIPS
Remote PhonebookOnline Directories - XML

<param name="NetDir.Xml.0.ProviderName" value="test"/>
<param name="NetDir.Xml.0.ServerAddress" value="//192.168.178.200/test.xml"/>


Preference

  • No labels