Page History

Bug-fixes and improvements:

• JABRA USB phone interface
• Voice Quality Monitoring: RTCP-XR
• Add entry field "Target number" for Function Keys Call Divert for Phone-systems Teles and Broadsoft

• Disable lookup requests for CallHistory

• Option to choose the NTP source
• [Teles] Call transfer not working if Maxwell is transferred
• Improvement with Broadsoft remote office implementation
• [Broadsoft][Teles] Disable "Voice Mail" option when number is not configured
• Use CNIP containing name replacement for calls from history
• Refresh automatic BLF's after provisioning
• Call number from Call Lists when handset is off-hook or speakerphone is activated.
• NTP - add config option, to disable revDNS querys (PTR), when NTP server is set as FQDN.
• Improve auto-answer to support more systems.
• Provisioning parameter to hide Distinctive Ringing.
• Voicemail menu, new message notification (MWI) for each account when multiple lines are used.
• [Voipgrid] For BLF pick-up via INVITE `;early-only' is needed
• [Provisioning][Redirect] Request are send to both servers 
• [MAX2] [Headset] Short strange voice after accepting call by "Headset Key" 
• [Broadsoft] call divert is not working correct, this happens only the first time after factory reset. 
• VLAN settings are set, but the phone does not use them 
• [Broadsoft] Flexseating improvement
• Failover - Maxwell try send SUBSCRIBE==0 to primary server, which is unavailable. 
• USB headset still rings, when call is ended by handset 
• [Maxwell basic] Open call logs shows all calls and not list selection 
• Call transfer Maxwell Basic using center key is not working 
• USB headsets do not end the call on reject 
• [OngoingCalls] No working Back Key in Info Menu state
• [USB] Wrong connected device icon 
• Problem with pressing Mute Button on Plantronics 
• Can not go to Dial Number via pressing PTT button 
• Blind transfer using LDAP directory does not work 
• Absence of "Save Number" option in the Call History lists 
• Muting USB headset during incoming call rejects the call 
• IP static address is not accepted after second and next changing 
• [LDAP] dialling number from LDAP contains special characters is not possible using 'Select Line' and 'Use number' option 
• Outgoing calls from redial is not performed via "select line" when receiver is off-hook and user 
• [Broadsoft] BLF are not deleted if they are removed from Broadsoft WebUI 
• Wrong displayed number in Call Divert 
• [Clearvox] External CLIP after transfer shown after pickup, to late
• No line seizure tone after fake or missed call 
• Ringtones missing synchronization with the PhoneUI 
• Two entries with name 'Doorstation' in Melodies 
• Inband tone in active call
• [Local Directory] No possibility to use special characters in the middle of name
• [Maxwell Basic]Incorrect display of the version number
• Long caller name simultaneous calls cut at the left side, only Maxwell basic
• [Teles] Ring splash is saved in call list
• [Broadsoft] Switching Call divert via Function Key doesn't work
• [Local Directory] Missing popup "No Entries"
• Melody is not saved in External Calls/ Internal Calls/ Group Calls/ Doorstation on PhoneUI
• Fqdn improvement
• Maxwell does not obtain IP address
• Device Name in Network isn't changed properly
• [Sennheiser] EHS - Lack of speech path
• [NTP] If more than one NTP server address is sent via DHCP Option 42 no NTP queries are sent
• [BLF] LED status changed too late, when network is lost

Bug-fixes and improvements:

• SIP timers verification
• tftp can be used for provisioning
• Translations are updated
• Call Park & Retrieve

• Display improvement for Multiple lines support

• [FunctionKeys] BLF and Line key are signalling the status for setting "Standard"
• Display Call lists in web-interface
• Delete SIP message display on Maxwell via empty SIP message
• Increase Standby Brigthness of Display
• Brightness adjustment via MMI and Web-UI
• [Provisioning] If provisioning.xml is not present, MAC.xml is downloaded
• No WebUI access after network settings changed
• BLF - reduce network traffic, without losing subscriptions on server
• Increase Standby Brigthness of Display
• Fail-over / fall-back - remove additional DNS query A
• Disconnect network cable during provisioning is stopping the provisioning process
• BLF - wrong status indication on second connection
• Ringtone handling via provisioning
• Firmware update is proceded, even if provisioning fails
• BLF - network traffic reduced
• Subscription to Broadsoft BLF need to be reorganize
• Synchronize BLF with Expansion module connect status
• FK "Line" when Call waiting is off does not work properly
• [WebUI][IE] Certificate details are not displayed
• Maxwell 3/B with provider Siptize- outgoing calls are not possible because the destination port is not correct
• Have to press the PTT button twice to take a call
• Maxwell does not upload configuration to server
• Missing pop up: File is not supported
• Impossible ringing from Phone-book
• [Maxwell 3] French translation issue
• [WebUI] User password accepts invalid characters
• [Broadsoft][BLF] SIP Subscribe is sent also for non-default account
• Phone PIN on WebUI is not working as expected
• SIP application crash when send BLF SUBSCRIBE in fail-over / fall-back scenario
• [XSI phone-book] Maxwell doesn't request for a next part of data while scrolling using long press
• [WebUI][Broadsoft] Missing 'Entry too long' label while enter too long name
• [LDAP] Additional attribute is not visible if set as callable
• "Call Completed Elsewhere" no longer working
• [LDAP] Maxwell does not go to Select Number screen
• XML directories - missing popup
• Failed Registration Retry Timer is not used
• SIP crashes on outgoing calls - resolved
• [LDAP] Call History request for name lookup when LDAP directory is disabled
• Maxwell doesn't change + to 000, when use contact from redial list
• [Broadsoft] No space character between CNIP and CLIP during consultation.
• [LDAP] Select Line state is not reached after Off Hook

Bug-fixes and improvements:

• [Maxwell 3] Export/import local phone-book to USB drive. (USB formatted FAT32)

• Optimization of Info Screen

• [XML Phonebook] Possibility to enable/disable auto-lookup
• Maxwell 3 Request for additional parameters in the 'INFO' menu
• MWI with and without counter support
• Direct access via HTTP URL protected with password
• HTTP authentication via MMI
• XSI authentication with SIP credentials
• XSI authentication with HTTP XSI credentials
• Feature Key Synchronization (Application Server Feature Event Package)
• Automatic or Manual assignment of Broadsoft BLF keys
  
• Call Lists support
• XSI Phonebooks
  
• Call Center agent
• [Phonebook] Maxwell does not react on PTT button - resolved
• Second consultation call is not working as expected - resolved
• Wrong translation on Softkeys in Idle - resolved
• Maxwell does not obtain IP address - resolved
• Incorrect name on the calling screen - resolved
• [Name replacement] Long names are shown incorrect – ‘…’ at the beginning - resolved
• [LDAP][Display format] Non-configured parameters are replaced by 'givenName' - resolved
• In a redundant environment BLF doesn't work once is connected to the backup SIP Server - resolved
• [WebUI] Missing popup "Entry is required" in Quick Dial Keys - resolved
• No in-band tone for blind transfer - resolved
• [MWI] Visual Call Notification (LED) - Voicemail - resolved
• [Doorcall] Problems with doorcall - resolved
• [EHS] After call there is no audio on Maxwell 3 - resolved
• FK "Line" when Call waiting is off does not work properly - resolved
• [PIN] Freezing WebUI after entering Phone PIN - resolved
• [Conference] [G729] Very low sound quality during conference - resolved
• [USB] USB headset does not return to idle state after call is terminated - resolved