...

Table of Contents

Your device will start automatically as soon as it is connected to the mains power supply. Please be aware that if the device is powered by PoE (Power over Ethernet) it is supplied with power as soon as it is connected to an Ethernet switch with PoE-functionality.

Setting the language

• On the Start screen tap on Image Modified to open the list of available apps. -> Select Image ModifiedSetting
• Scroll down and select Image Modified  Language & input ->Tap on Language -> Select your desired language.

Registering the handset (DECT)

If you use a DECT handset you need to register it on the phone. 
Install the handset as described in the Installation Guide and place it in the cradle in order to charge the battery.
On the Start screen tap on  to open the list of available apps. ->  Select Image Modified Settings.

Select Image Modified  DECT -> Tap on Register DECT Handset. 

The registration process may take some time. If the registration is successful a message is output.

Establishing a connection to the local network

Your phone must be connected to the local network before it can connect to a phone system or the Internet and before you can operate it from a PC. You can connect the phone to the local network via Ethernet or Wi-Fi.

Connecting via Ethernet

• Make sure that the phone's LAN port Image Modified is connected to an Ethernet switch/router by an Ethernet cable. 
• On the Start screen tap on Image Modified to open the list of available apps. -> Select Image Modified Settings.
• Select Image Modified  Ethernet -> Drag switch by Ethernet to the right to switch on Ethernet function.

...

• Enter the data of your proxy server.

Connecting via Wi-Fi

• On the Start screen tap on Image Modified to open the list of available apps. -> Select Image Modified Settings.
• Select Image Modified  Wi-Fi -> Drag switch by Wi-Fi to the right to switch on Wi-Fi function.
• Please be sure to switch off Ethernet to be able to get a WiFi connection!

 
The phone attempts to connect with a Wi-Fi in range. Once a connection has been established, you will see the Wi-Fi icon in the toolbar. It displays the signal strength.
A list of Wi-Fis in range of your phone is displayed. An icon indicates the signal strength. Secure networks are identified with a lock icon.

• If necessary, tap on Image Modified  context menu -> Scan to update the list. 

...

Wi-Fis that are not in range or that withhold the SSID and are therefore not displayed in the list can be entered manually. You will require the network name (SSID), the security protocol used and the network key. Once the tablet is in range of one of these Wi-Fis, the connection is established.

• Select Image ModifiedWi-Fi -> Tap on Image Modified -> Enter Network SSID. 

...

The device searches the network for a provisioning file and checks whether VoIP accounts already exist. If the telephone has existing VoIP accounts, these accounts are configured automatically. You can now make calls with your phone via the Internet.
If the telephone has no existing VoIP accounts, you must configure them manually. The Web config urator will help you with this.