Versions Compared

Old Version 25

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 122

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Align
alignright

Image Added

Image Added

Image Added

Image Added

...

Web-interface: Settings - Network - IP
Device nameValueDevice name in the network: Label for the device. It is used to identify the device in network communication.

Web-interface Language
WebUI.1.Languagecs-cz,de-de,el-gr,en-bt,es-es,fr-fr,it-it,nl-nl,pt-pt,ru-ru,sk-sk,tr-tr,pl-plLanguage: Current supported web-interface language is English, German, Russian, Czech, Spanish, French, Italian, Netherlands, Portuguese, Slovenian, Turkey, Greece, Polish

Device name
Not via provisioning
Device name in the network: Label for the device. It is used to identify the device in network communication.

Address Assignment
Not via provisioning
Network type: IPv4 / IPv6 (planned)
Supported see Wiki for detailsdhcp - staticIP address type: Dynamic / Static
Supported see Wiki for details
IP address:
Supported see Wiki for details
Subnet mask:
Supported see Wiki for details
Standard gateway:
Supported see Wiki for details
Preferred DNS:
Supported see Wiki for details
Alternate DNS:
Address AssignmentValueNetwork type: IPv4 / IPv6 (planned)IP address type: Dynamic / StaticIP address:Subnet mask:Standard gateway:Preferred DNS:Alternate DNS:Web-interface: Settings - Network - LANVLANValueVLAN tagging:0 - 4094VLAN identifier:0 - 7VLAN priority:Web-interface: Settings - Base stations - AdministrationConfirmedBaseStations.<mac>.nameName / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT networkConfirmedBaseStations.<mac>.ucTxPower

0

1

0 = Normal power output (Default)
1= Reduce TX power by 8dB for external antenna operation

ConfirmedBaseStations.<mac>.bActivateCell010 = Base station deactivated
1 = Activated base station (Default)
Web-interface: Settings -
Base stations
Network -
Synchronization

ConfirmedBaseStations.<mac>.ucCluster

110Select the cluster to which the base should be assigned to from the option menu.
LAN

VLAN
Supported see Wiki for detailsvlan - eth0VLAN tagging:
Supported see Wiki for details0 - 4094VLAN identifier:
Supported see Wiki for details0 - 7VLAN priority:
Web-interface: Settings - Base stations - Administration
ConfirmedBaseStations.<mac>.name
Name / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT network
ConfirmedBaseStations.<mac>.ucSyncLevel110Select the synchronization level for the base station.
ConfirmedBaseStations.<mac>.
bSyncLanMaster
ucTxPower
0
1

0 =

Off

Normal power output (Default)
1=

LAN Master

Reduce TX power by 8dB for external antenna operation

ConfirmedBaseStations.<mac>.bActivateCell10 = Base station deactivated
1 = Activated base station (Default)
Web-interface: Settings
- Provider or PBX profilesVoIP ProviderValueSipProvider.<0-9>.Name 
- Base stations - Synchronization

ConfirmedBaseStations.<mac>.ucCluster

1 - 10Select the cluster to which the base should be assigned to from the option menu.
ConfirmedBaseStations.<mac>.ucSyncLevel0 - 15Select the synchronization level for the base station.
ConfirmedBaseStations.<mac>.bSyncLanMaster0 - 1

0 = Off (Default)
1 = LAN Master

Web-interface: Settings - Provider or PBX profiles

VoIP Provider
SipProvider.<0-19>.Name 
Connection name or number: Name for the provider or PBX profile.
Connection name or number: Name for the provider or PBX profile.
This name is shown in the Provider/PBX list

Phone system
Value
SipProvider.<0-
9>
  • Automatic (0)
    • 19>.PhoneSystem

    System:

    0 = Automatic
    1 = Standard
    6 = Broadsoft

  • Openscape
  • Nfon

    • 10 = Swyx
    11 = 3CX

    System: Select the type of PBX you use for VoIP provisioning from the option menu.



    		General data of your service provider
    Value
    SipProvider.<0-
    9>
    19>.Domain
    		Domain: Domain part of the user address (SIP URI)
    SipProvider.<0-
    9>
    19>.ProxyServerAddressIP address/ DNS nameProxy server address: The SIP proxy is your VoIP provider's gateway server and the first SIP server, where the device should send SIP requests and expects to receive requests
    SipProvider.<0-
    9>
    19>.ProxyServerPort1 - 65535Proxy server port (Default 5060): Enter the port number of the first SIP server, where the device should send SIP requests and expects to receive requests.
    SipProvider.<0-
    9>
    19>.RegServerAddressIP address/ DNS nameRegistration server: The registration server assigns the public IP address/port number that was used by the phone on registration to your SIP address (username@domain)
    SipProvider.<0-
    9>
    19>.RegServerPort1 - 65535Registration server port (Default 5060): Enter the communication port used on the registrar.
    SipProvider.<0-
    9>
    19>.RegServerRefreshTimer

    1 - 5 digits

    		Registration refresh time (Default 180): Enter the time intervals (in seconds) at which the phone should repeat the registration with the VoIP server (SIP proxy)
    SipProvider.<0-
    9>
    19>.TransportProtocol1 = UDP
    2 = TCP
    3 = TLS

    Transport protocol:

    SipProvider.<0-
    9>
    19>.UseSIPS0
    - 1Use SIP Security (SIPS):
    0
    = SIPS disabled (Default)
    1 = SIPS enabled

    Use SIP Security (SIPS):

    SipProvider.<0-
    9>
    19>.SRTP_Enabled0
    - 1
    1 = SRTP enabled
    = SRTP disabled (Default)
    1 = SRTP enabled    		Secure Real Time Protocol: Security (RTP) is activated for voice connections.
    0 = SRTP disabled (Default)
    SipProvider.<0-
    9>
    19>.AcceptNonSRTPCalls0 = Do not accept non-SRTP calls
    1 = Accepts non-SRTP calls

    Accept non-SRTP calls: Insecure calls are accepted even when SRTP is activated.

    SipProvider.<0-19>.WithDeregOnHsNotReachable0 =
    Do not accept non-SRTP calls
    No
    1 =
    Accepts non-SRTP calls
    YesDeregister detached HS

    		Redundancy
    Value
    SipProvider.<0-
    9>
    19>.DnsQuery

    0

    - 1Redundancy - DNS

    = A
    1 = SRV + A 
    2 = NAPTR (NAPTR + SRV + A)

    Redundancy - DNS query: VoIP providers provide SIP server redundancy for load balancing and service reliability. SIP servers can be identified by DNS using different queries:.

    0 = A
    1 = SRV + A 

    		Failover Server
    Value
    SipProvider.<0-
    9>
    19>.FailoverServerEnabled
    0 -1Failover Server:
    0 = Off
    1 = On    		Failover Server:
    SipProvider.<0-
    9>
    19>.FailoverServerAddressIP address/ DNS nameRegistration server: Enter the IP address or the (fully qualified) DNS name of the failover registration server.
    SipProvider.<0-
    9>
    19>.FailoverServerPort1- 65535Registration port (Default 5060): The communication port used on the failover registrar.

    		Network data of your service provider
    Value
    SipProvider.<0-
    9>
    19>.OutboundProxyMode0 = Always
    2 = Never

    Outbound proxy mode:

    SipProvider.<0-
    9>
    19>.OutboundProxyAddressIP address/ DNS nameOutbound server address:
    SipProvider.<0-
    9>
    19>.OutboundProxyPort1 - 65535Outbound proxy port  (Default 5060)
    SipProvider.<0-
    9>
    19>.MWISubscription0
    -1
    = Do not send SIP Subscribe for MWI
    1 = Send SIP Subscribe for MWI

    SIP SUBSCRIBE for Net-AM MWI: When activated a subscription is established for the purpose of receiving notifications about new messages on the network mailbox

    0 = Do not send SIP Subscribe for MWI
    1 = Send SIP Subscribe for MWI

    		DTMF over VoIP Connections
    SipProvider.<0-19>
    DTMF over VoIP ConnectionsValueSipProvider.<0-9>
    .DTMFTransmission1 = Audio
    2 = RFC 2833
    3 = Audio + RFC 2833
    4 = SIP INFO
    5 = Audio + SIP INFO
    6 = RFC 2833 + SIP INFO
    7 = Audio + RFC 2833 + SIP INFO
    129 = Automatic DTMF Negotiation
    Settings for CodecsValueSipProvider
    Send settings of DTMF transmission

    		Connection Ringtone
    SipRingtones.<0-
    9>
    19>.
    ActiveCodecs18,9,8,0

    Active codecs:

    0 = g711u
    8 = g711a
    9 = g722
    18 = g729

    SipProvider.<0-9>.RTPPtime20, 30RTP Packetisation Time (ptime): Length of time in milliseconds (10, 20 (Default), 30) represented by the audio data in one packet.SipProvider.<0-9>.HoldType0 - 1

    Signalling options for 'Hold' in Session Description Protocol (SDP): Call hold means that a user request to put an active call on hold. The holding part sends a re‑INVITE request to the held client with an SDP offer (Session Description Protocol). This SDP offer contains the attribute line a=inactive or a=sendonly.

    0 = Inactive
    1 = Sendonly (Default)

    SipProvider.<0-9>.CT_HoldTT_Attended0 - 10 = Attended Transfer
    1 = Unattended TransferSipProvider.<0-9>.CT_HoldTT_Unattended0 - 1Settings for Codecs > Hold towards Transfer-Target > Unattended TransferDisplay of Caller InformationValueSipProvider.<0-9>.CLIPSource0 - 20 = FROM
    1 = PPI+FROM
    2 = PAI+PPI+FROM (Default)Service CodesValueSipProvider.<0-9>.ServiceCode_CC_OnCall Completion on (CCBS, CCNR): SipProvider.<0-9>.ServiceCode_CC_OffCall Completion off (CCBS, CCNR): CSTAValueSipProvider.<0-9>.CSTA_IsActive

    Active:

    Yes
    No

    SipProvider.<0-9>.CSTA_IsExternal

    External:

    Yes
    No

    SipProvider.<0-9>.CSTA_AddressAddress:SipProvider.<0-9>.CSTA_PortPort:SipProvider.<0-9>.CSTA_UseSips

    Use SIP Security (SIPS):

    Yes
    No

    SipProvider.<0-9>.CSTA_RegServerRefreshTimerRegistration refresh time:SipProvider.<0-9>.CSTA_TransportProtocol

    Transport protocol:

    UDP
    TCP
    TLS

    SipProvider.<0-9>.CSTA_DnsQuery

    DNS query:

    A
    SRV + A

    SipProvider.<0-9>.AllowRouteHeadersSipProvider.<0-9>.DnDServiceCodeOffSipProvider.<0-9>.DnDServiceCodeOnSipProvider.<0-9>.DnDTypeSipProvider.<0-9>.RequestCheckOptSipProvider.<0-9>.STUNAddressSipProvider.<0-9>.STUNEnabledSipProvider.<0-9>.STUNPortSipProvider.<0-9>.STUNRefreshTimerWeb-interface: Settings - Mobile devices
    DmGlobal.0.HSIdleDisplay0 - 1

    Displayed name in idle display

    0 = Username
    1 = Display name

    Web-interface: Settings - Mobile devices - AdministrationMobile devicehs.<ipui>.Ipuihs.<ipui>.RegStatus

    ToReg = "To Register", add new Handset
    ToDeReg = "To DeRegister", delete existing HS
    NotReg = "Not Registered", default value

    hs.<ipui>.DECT_AC

    Authentication Code (PIN)Personal provider dataSipAccount.<ipui>.ActiveSipAccount.<ipui>.AuthNameSIP Authentication nameSipAccount.<ipui>.AuthPasswordSIP Authentication passwordSipAccount.<ipui>.UserNameSIP UsernameSipAccount.<ipui>.DisplayNameSIP Display nameSipAccount.<ipui>.ProviderIdVoIP providerSipAccount.<ipui>.AuthenticateAutoAnswerCallSipAccount.<ipui>.CLIRSipAccount.<ipui>.CallDivert_ActiveSipAccount.<ipui>.CallDivert_DelaySipAccount.<ipui>.CallDivert_ModeSipAccount.<ipui>.CallDivert_TargetSipAccount.<ipui>.CallWaitingSipAccount.<ipui>.DnDActiveOnline directorieshs.<ipui>.DirectAccessDirDirectory for direct accesshs.<ipui>.IntKeyDirCorporate directory for INT keyhs.<ipui>.AutoLookupDirAutomatic look-upLDAP authenticationhs.<ipui>.LDAPIdSelected LDAP bookhs.<ipui>.LDAPShowProvidersShow other LDAP servershs.<ipui>.LDAPAuthTypeLDAP authorization typehs.<ipui>.LDAPUseSIPCredentialsLDAP Use personal provider data (SIP)hs.<ipui>.LDAPUsernameLDAP Usernamehs.<ipui>.LDAPPasswordLDAP PasswordNetwork mailbox configurationSipAccount.<ipui>.VoiceMailMailboxVoicemail box number / nameSipAccount.<ipui>.VoiceMailActive

    Activate Voicemail box

    0 = Disabled
    1 = Enabled

    Group pick-upSipAccount.<ipui>.OpenScapeGroupPickupAddressCall number or SIP name (URI)SipAccount.<ipui>.OpenScapeGroupPickupActiveActivate group pick-upCall managerhs.<ipui>.CallManagerCallsViaAccept calls directly via Call ManagerMissed calls and alarms

    hs.<ipui>.SaveMissedCalls

    hs.<ipui>.SaveAcceptedCalls

    Missed/accepted calls count

    hs.<ipui>.ShowMissedCalls

    Flashing LED (MWI) for missed calls

    hs.<ipui>.ShowMissedAlarms

    Flashing LED (MWI) for missed alarms

    hs.<ipui>.ShowMissedNetAM

    Flashing LED (MWI) for network mailboxCSTASipAccount.<ipui>.CSTA_UsernameUsernameSipAccount.<ipui>.CSTA_AuthNameAuthentication nameSipAccount.<ipui>.CSTA_AuthPasswordAuthentication passwordParameter nameValue:minValue:maxValue:AllowedWeb-interface: Settings - Mobile devices - Registration CenterParameter nameValue:minValue:maxValue:AllowedWeb-interface: Settings - Telephony - VoIPDmGlobal.0.Port165535SIP port (Default 5060)SecureSecure SIP port (Default 5061)DmGlobal.0.Timers_T1SIP timer T1 (Default 500)DmGlobal.0.Timers_SessionSIP session timer (Default 1800)DmGlobal.0.Timers_FailedRegistrationFailed registration retry timer (Default 300)DmGlobal.0.Timers_SubscriptionSubscription timer (Default 1800)DmGlobal.0.PRACK010 = PRACK disabled
    1 = PRACK enabledSIP Security Password

    DmGlobal.0.QoS_SIP_DSCP

    SIP ToS / DiffServ (Default 34)

    DmGlobal.0.QoS_RTP_DSCP

    RTP ToS / DiffServ (Default 46)Parameter nameValue:minValue:maxValue:AllowedWeb-interface: Settings - Telephony - AudioDmGlobal.0.WidebandEnabled010 = Wideband with codec G.722 disabled
    1 = Wideband with codec G.722 disabledParameter nameValue:minValue:maxValue:AllowedWeb-interface: Settings - Telephony - Call settingsCall Transfer

    Telephony.0.CT_ViaRKey

    0 - 1

    Call transfer via R key: Activated: Users can connect two external callers with each other by pressing the R key. The connections with both parties are terminated.
    0 = No
    1 = Yes

    Telephony.0.CT_ByOnHook

    0 - 1

    Transfer call by on-hook: Activated: The two participants are connected with one another when the user presses the end call key. The intermediary's connections with the participants are terminated.
    0 = No
    1 = Yes

    Telephony.0.CT_AutoDetermineAddress

    0 - 1

    Determine transfer target address: Select how the transfer target address (Refer-To URI) is to be derived: From transfer target's AOR (Address of Record). From transfer target's transport address (Contact URI)
    0: off
    1: on

    Access Code

    Telephony.0.AccessCode

    max. 3 digits (0 - 9, *, R, #, P)Access Code:

    Telephony.0.AccessCodeFor

    Is added to numbers: Select when the phone numbers should be automatically prefixed with the digits, e.g. when dialling from a call list or a directory.

    0 = Outgoing calls list
    1 = Incoming calls list
    2 = LDAP
    3 = Local directory
    4 = Public net directory
    5 = Dial editor 

    Area Codes

    AreaCodes.0.Country

    Germany

    Country: From the option menu select the country or region where your telephone system is to be used . . . the international and national prefix is then entered in the Prefix and Area code fields.

    International

    AreaCodes.0.Int_Prefix

    max. 4 digits, 0-9Prefix:

    AreaCodes.0.Int_Code

    max. 4 digits, 0-9Area code:Local

    AreaCodes.0.Local_Prefix

    max. 4 digits, 0 - 9Prefix:

    AreaCodes.0.Local_Code

    max. 8 digits, 0 - 9Area code:Tone Selection

    Telephony.0.ToneScheme

    Tone scheme: Select the country or region whose ring tones are to be used for your phone from the option menu.

    Austria
    Belgium
    Czech
    Denmark
    Finland
    France
    Germany
    Retail
    Italy
    Netherlands
    Norway
    Poland
    Portugal
    Slovakia
    Spain
    Sweden
    Switzerland
    Turkey
    UAE
    UK

    Parameter nameValue:minValue:maxValue:AllowedWeb-interface: Settings - Online directories - Public

    XMLDir.0.ProviderName

    Public

    Directory name

    XMLDir.0.ServerURL

    Server address

    XMLDir.0.Username

    Username

    XMLDir.0.Password

    PasswordNetdir.4.ActivatedEnable Public White PagesMaximum number of entries

    XMLDir.0.WhitePagesDirName

    Directory name

    XMLDir.0.StartWithListWP

    010: off
    1: onNetdir.5.ActivatedEnable Public Yellow Pages

    XMLDir.0.YellowPagesDirName

    Directory name

    XMLDir.0.StartWithListYP

    010: off
    1: onNetdir.6.ActivatedEnable Public Private Pages

    XMLDir.0.PrivatePagesDirName

    Directory name

    XMLDir.0.StartWithListPP

    00: off
    1: onWeb-interface: Settings - Online directories - CorporateAccess to LDAP server

    LDAPDir.0.DirName

    max. 20 charactersDirectory name:???????Enable directory

    LDAPDir.0.ServerURL

    IP address/ DNS nameServer address: Enter the URL of the LDAP server

    LDAPDir.0.ServerPort

    1 - 65535Server port: Enter the port the LDAP server expects database requests (Default: 389)

    LDAPDir.0.BaseDN

    Search base (BaseDN): The LDAP database is hierarchical in design. With the LDAP Search base (BaseDN) parameter, stipulate in which area the search should begin.

    LDAPDir.0.Username

    max. 254 charactersUsername: Enter a global username for the user access to the LDAP director.

    LDAPDir.0.Password

    max. 254 charactersPassword: Enter a global password for the user access to the LDAP directory.Search in LDAP databaseValue

    LDAPDir.0.StartWithList

    0 - 1

    Enable List mode: Define what should be initially shown, when the user opens the LDAP directory

    0: off
    1: on

    LDAPDir.0.NameFilter

    (|(cn=%)(sn=%))Name filter: The name filter decides which attribute is used for the search.

    LDAPDir.0.NumberFilter

    (|(telephoneNumber=%)(mobile=%))Number filter: The number filter stipulates the criteria for the automatic completion of telephone numbers.

    LDAPDir.0.AdditionalFilter1Name

    Additional filter #1 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed.

    LDAPDir.0.AdditionalFilter1

    Additional filter #1 value: Enter the value for the attribute entered in the corresponding name field.

    LDAPDir.0.AdditionalFilter2Name

    Additional filter #2 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed.LDAPDir.0.AdditionalFilter2Additional filter #2 value: Enter the value for the attribute entered in the corresponding name field.

    LDAPDir.0.DisplayName

    Display format: In this field you can stipulate how the search result is to be displayed on the handset.

    LDAPDir.0.MaxNrOfSearchEntries

    50Max. number of search results:Configuration of directory itemsValue

    LDAPDir.0.ItemFN

    First name

    LDAPDir.0.ItemLN

    Surname

    LDAPDir.0.ItemPH

    Phone (home)LDAPDir.0.ItemPOPhone (office)LDAPDir.0.ItemPMPhone (mobile)

    LDAPDir.0.ItemEM

    E-mail

    LDAPDir.0.ItemFX

    Fax

    LDAPDir.0.ItemCP

    Company

    LDAPDir.0.ItemST

    Street

    LDAPDir.0.ItemCT

    City

    LDAPDir.0.ItemZP

    Zip

    LDAPDir.0.ItemCO

    Country

    LDAPDir.0.ItemAA

    Additional attribute

    LDAPDir.0.IsAdditionalAttributeDialable

    0 - 1

    0: off
    1: on

    LDAPDir.0.BookNoLDAPDir.0.MaxNrOfSessions100LDAPDir.0.TlsMode0 - 1

    LDAPDir.0.UseIndividualCredentials

    0 - 10: off
    1: on    Web-interface: Settings - Online directories - XMLWeb-interface: Settings - System - Web configuratorWebUIAccounts.1.PasswordChange Password > New password (Admin)CLI PasswordWeb-interface: Settings - System - Provisioning and configurationProvisioning and configurationProvisioning.global.ProvisioningServermax. 255 characters

    Provisioning server: Enter the URL of your provisioning server in the text field.

    Web-interface: Settings - System - SecurityAccept all certificatesSecurity.global.HTTPAuthUsernameHTTP Authentication > HTTP digest username

    Security.global.HTTPAuthPassword

    HTTP Authentication > HTTP digest passwordWeb-interface: Settings - System - System logDmGlobal.0.SysLogEnable010: off
    1: onDmGlobal.0.SysLogServerServer addressDmGlobal.0.SysLogServerPortServer port (Default 514)

    StateInfo.global.DebugLevelMask

    DWED = debug
    W = warning
    E = error
    I = info
    T = testSNMP manager addressSNMP manager portWeb-interface: Settings - System - Date and timeDate and timeDmGlobal.0.NtpServer

    Fcod

    0.europe.pool.ntp.org,1.europe.pool.ntp.org,

    2.europe.pool.ntp.org,3.europe.pool.ntp.org

    DmGlobal.0.TimeZonetimezones.txtAct as Local Time ServerWeb-interface: Settings - System - Date and timeURL to firmware filePlanned scheduleHidden ParametersDmGlobal.0.DECTCipherDisable

    > disable ciphering
    0: off
    1: on

    DmGlobal.0.DECTEcoMode

    > eco mode
    0: off
    1: on

    DmGlobal.0.DECTEnhancedEncryption

    > enhanced encryption
    0: off
    1: on

    DmGlobal.0.DECTBlindslots

    > blind slot configuration (12 slots)
    bit 0x0800 = slot 0
    bit 0x0001 = slot 11

    DmGlobal.0.DECTAvailFrequencies

    > available frequencies configuration (10 f.)
    > this can be used to disable frequencies
    > frequencies blocked by reg-domain will not be enabled by this setting
    bit 0x0200 = channel 0
    bit 0x0001 = channel 9

    DmGlobal.0.DECTCfSettings

    > cf mode
    > bit 0..3 = number of fragments used for cf
    bit 7=0: off
    bit 7=1: on

    DmGlobal.0.DECTTBR6Mode

    > DECT TBR6 test mode
    0: off
    1: on

    DmGlobal.0.DectEchoConfig

    > DECT echo configuration mask:
    bit 0x01: BS DECT echo cancellor allowed
    bit 0x02: BS DECT echo suppressor allowed
    bit 0x04: HS suppessor allowed
    bit 0x80: force BS echo suppressor/cancellor

    DmGlobal.0.NetworkEchoConfig> BS network echo configuration:
    bit 0x01: BS network suppressor on
    RingToneName0Internal CallsInternal calls name (This can not be changed)
    SipRingtones.<0-19>.RingInfo0info=alert-internalInternal calls Alert-Info pattern
    SipRingtones.<0-19>.RingToneName1External CallsExternal calls name
    SipRingtones.<0-19>.RingInfo1info=alert-externalExternal calls Alert-Info pattern
    SipRingtones.<0-19>.RingToneName2Group CallsGroup calls name
    SipRingtones.<0-19>.RingInfo2info=alert-groupGroup calls Alert-Info pattern
    SipRingtones.<0-19>.RingToneName3Door stationDoor station name
    SipRingtones.<0-19>.RingInfo3info=alert-doorDoor stations Alert-Info pattern
    SipRingtones.<0-19>.RingToneName4EmergencyEmergency name
    SipRingtones.<0-19>.RingInfo4info=alert-emergencyEmergency Alert-Info pattern
    SipRingtones.<0-19>.RingToneName5OptionalOptional Name
    SipRingtones.<0-19>.RingInfo5By default this is emptyOptional Alert-Info pattern
    DmGlobal.0.SupportSipRingtones0 = Disabled
    1 = Enabled (Default)    		Disable Distinctive ring (Option is not  available in the web-interface)
    SipRingtones.0.DefaultTone0 = Internal
    1 = External (Default)
    2 = Group
    3 = Door
    4 = Emergency
    5 = Optional    		The tone played when the Alert info header is not recognized. By default the External ringtone is played. (Option is not  available in the web-interface)

    		Settings for Codecs
    SipProvider.<0-19>.ActiveCodecs

    0 = g711u
    8 = g711a
    9 = g722
    18 = g729

    Example: 18,9,8,0

    Active codecs:

    SipProvider.<0-19>.RTPPtime10, 20, 30RTP Packetisation Time (ptime): Length of time in milliseconds (10, 20 (Default), 30) represented by the audio data in one packet.
    SipProvider.<0-19>.HoldType0 = Inactive
    1 = Sendonly (Default)

    Signalling options for 'Hold' in Session Description Protocol (SDP): Call hold means that a user request to put an active call on hold. The holding part sends a re‑INVITE request to the held client with an SDP offer (Session Description Protocol). This SDP offer contains the attribute line a=inactive or a=sendonly.

    SipProvider.<0-19>.CT_HoldTT_Attended0 = No
    1 = Yes    		Hold towards Transfer-Target: The device enables call transfer after consultation or without consultation. Define, whether a consultation call with transfer target is put on-hold prior to the execution of the call transfer (Yes) or not (No)


    		Display of Caller Information
    SipProvider.<0-19>.CLIPSource0 = FROM
    1 = PPI+FROM
    2 = PAI+PPI+FROM (Default)

    Calling Party (User Part): From the option menu select which information is allowed to be transferred to the receiving part within the SIP header. Which information is actually transferred is determined by the provider.


    		Service Codes
    SipProvider.<0-19>.ServiceCode_CC_On
    		Call Completion on (CCBS, CCNR):
    SipProvider.<0-19>.ServiceCode_CC_Off
    		Call Completion off (CCBS, CCNR):

    		CSTA
    SipProvider.<0-19>.CSTA_IsActive

    0 = No
    1 = Yes

    Active: Computer Supported Telecommunications Applications is a standard for the interaction between a computer and a PBX, independently from the manufacturer. If your PBX provides CSTA applications to be used by the registered handsets you have to activate the standard here.

    SipProvider.<0-19>.CSTA_IsExternal0 = No
    1 = Yes

    External:

    SipProvider.<0-19>.CSTA_Address
    		Address: CSTA server address
    SipProvider.<0-19>.CSTA_Port
    		Port: CSTA port, default 5060
    SipProvider.<0-19>.CSTA_RegServerRefreshTimer600CSTA Refresh timer, default 600 seconds
    SipProvider.<0-19>.CSTA_DnsQuery0 = A
    1 = SRV +A

    DNS query:

    SipProvider.<0-19>.CSTA_TransportProtocol

    1 = UDP
    2 = TCP
    3 = TLS

    		CSTA protocol
    Web-interface: Settings - Mobile devices

    		Global Settings
    DmGlobal.0.HSIdleDisplay0 = Username
    1 = Display name

    Displayed name in idle display:

    Web-interface: Settings - Mobile devices - Administration

    		Mobile device
    hs.<ipui>.Ipui

    IPUI: (International Portable User Identity) Unique identifier of a handset within the DECT network. If you edit an existing handset registration entry, the IPUI is shown and cannot be changed.

    hs.<ipui>.RegStatusToReg = "To Register", add new Handset
    ToDeReg = "To DeRegister", delete existing HS
    NotReg = "Not Registered", default value

    RegStatus: DECT registration status of the handset entry.

    hs.<ipui>.DECT_AC

    		min. 1, max. 4 digits

    Authentication Code (PIN): This PIN must be used on the handset to register with the DECT network.


    		Personal provider data
    SipAccount.<ipui>.AuthNameMax. 74 charactersSIP Authentication name: Specify the SIP authentication (HTTP digest) name. The Authentication name acts as access ID when registering with the SIP proxy/registrar server. It is usually identical to the phone number for the VoIP account.
    SipAccount.<ipui>.AuthPasswordMax. 74 charactersSIP Authentication password: Enter the password for SIP authentication (HTTP digest). The phone needs the password when registering with the SIP proxy/registrar server.
    SipAccount.<ipui>.UserNameMax. 74 charactersSIP Username: Enter the caller ID for the VoIP provider account. It is usually identical to the phone number for the VoIP account.
    SipAccount.<ipui>.DisplayNameMax. 74 charactersSIP Display name:
    SipAccount.<ipui>.ProviderId0 - 19VoIP provider:

    		Online directories
    hs.<ipui>.DirectAccessDirSee this wiki page.Directory for direct access: The user can press and hold the directory key (bottom of the control key) to open either the list of online directories or the local directory of the handset. Choose which directory is called up with the directory key.
    hs.<ipui>.IntKeyDir

    See this wiki page.

    		Corporate directory for INT key: If a corporate directory is available and configured the user can open it by pressing the INT key (left on the handset’s control key). Choose from the list which corporate directory is opened with the INT key.
    hs.<ipui>.AutoLookupDir

    See this wiki page.

    		Automatic look-up: Select an online directory from the list for Automatic look-up or deactivate this option. When there is an incoming call, the caller's name is read from this directory and shown in the display (the availability of this function depends on the online directory provider).

    		LDAP authentication
    hs.<ipui>.LDAPId

    255 = None

    0 = LDAP 1
    1 = LDAP 2
    ...

    		Selected LDAP book: Select the LDAP directory to be provided on the handset from the option menu.
    hs.<ipui>.LDAPShowProviders0 = No
    1 = Yes    		Show other LDAP servers: Select Yes if directories of other LDAP servers should be allowed to be shown.
    hs.<ipui>.LDAPAuthType0 = Global
    1 = User
    2 = SIP    		LDAP authorization type: Select how the user authentication should be performed:

    Global: Credentials are set for all handsets during the LDAP directory set-up.
    User: Individual credentials are used.
    SIP: The credentials for the user’s SIP account are used (Authentication name and Authentication password).

    hs.<ipui>.LDAPUsernameMax. 254 charactersLDAP Username: Enter the user name for individually accessing the LDAP directory.
    hs.<ipui>.LDAPPasswordMax. 254 charactersLDAP Password: Enter the password for individually accessing the LDAP directory.

    		Network mailbox configuration
    SipAccount.<ipui>.VoiceMailMailbox
    		Call number or SIP name (URI): Enter the Call number or SIP name (URI) for the network mailbox.
    SipAccount.<ipui>.VoiceMailActive0 = Disabled
    1 = Enabled

    Activate Voicemail box



    		Group pick-up
    SipAccount.<ipui>.OpenScapeGroupPickupAddress
    		Call number or SIP name (URI): Enter the Call number or SIP name (URI) of the pick-up group.
    SipAccount.<ipui>.OpenScapeGroupPickupActive0 = Disabled
    1 = Enabled    		Activate group pick-up
    DmGlobal.0.CallPickUpAlertCall

    0 = Disable: Notification tone is played

    1 = Enable: Notification tone and Ringtone is played

    		Not available in the web-interface

    		Call manager
    hs.<ipui>.CallManagerCallsVia

    No
    Headset
    Handsfree

    		Accept calls directly via Call Manager: From the option menu select whether calls that are transferred via the PBX call manager are to be accepted directly via Headset, via Handsfree or not at all (No).

    		Missed calls and alarms

    hs.<ipui>.SaveMissedCalls

    		0 = No
    1 = Yes    		Missed/accepted calls count: Select Yes/No, to activate/deactivate the call counter for missed and accepted calls. The information is displayed in the handset’s call lists, missed calls are also shown on the handset’s idle display.
    hs.<ipui>.SaveAcceptedCalls0 = No
    1 = Yes    		Accepted calls count

    hs.<ipui>.ShowMissedCalls

    		0 = No
    1 = Yes    		Flashing LED (MWI) for missed calls: Select Yes/No, to activate/deactivate the MWI LED on the handset’s message key for missed calls.

    hs.<ipui>.ShowMissedAlarms

    		0 = No
    1 = Yes    		Flashing LED (MWI) for missed alarms: Select Yes/No, to activate/deactivate the MWI LED on the handset’s message key for missed alarms.

    hs.<ipui>.ShowMissedNetAM

    		0 = No
    1 = Yes    		Flashing LED (MWI) for network mailbox: Select Yes/No, to activate/deactivate the MWI LED on the handset’s message key for new messages on the network mailbox.

    		CallWaiting
    SipAccount.<ipui>.CallWaiting0 = No
    1 = Yes    		Enable or disable call waiting, setting is not available in the web-interface.

    		CSTA
    SipAccount.<ipui>.CSTA_Username
    		Username
    SipAccount.<ipui>.CSTA_AuthName
    		Authentication name
    SipAccount.<ipui>.CSTA_AuthPassword
    		Authentication password

    		Broadsoft XSI services
    hs.<ipui>.XsiSip0 = No
    1 = Yes    		Use SIP credentials: If activated, the credentials for the user’s SIP account (Authentication name and Authentication password are used.
    hs.<ipui>.XsiUsername
    		Username: Enter a user name for the user access to the menu (max. 22 characters).
    hs.<ipui>.XsiPassword
    		Password: Enter a password for the user access to the menu (max. 8 characters).

    		Feature key synchronization
    SipAccount.<ipui>.FeatureKeySyncActive0 = No
    1 = Yes    		Feature key synchronization: This option permits the users to use keys on their phones to handle Do Not Disturb and Call Forwarding. If activated, the phones synchronise with the BroadWorks Application server on the status of these features.
    Web-interface: Settings - Mobile devices - Registration Center
    See wiki article.

    Web-interface: Settings - Telephony - Audio

    		Audio
    DmGlobal.0.WidebandEnabled0 = Wideband with codec G.722 disabled
    1 = Wideband with codec G.722 enabled
    Web-interface: Settings - Telephony - Call settings

    		Call Transfer

    Telephony.0.CT_ViaRKey

    0 = No
    1 = Yes

    Call transfer via R key: Activated: Users can connect two external callers with each other by pressing the R key. The connections with both parties are terminated.

    Telephony.0.CT_ByOnHook

    0 = No
    1 = Yes

    Transfer call by on-hook: Activated: The two participants are connected with one another when the user presses the end call key. The intermediary's connections with the participants are terminated.

    Telephony.0.CT_DeriveTargetAddresssipurl
    sipcontact    		Determine transfer target address: Select how the transfer target address (Refer-To URI) is to be derived: From transfer target's AOR (Address of Record). From transfer target's transport address (Contact URI)

    		Access Code

    Telephony.0.AccessCode

    		max. 3 digits (0 - 9, *, R, #, P)Access Code:

    Telephony.0.AccessCodeFor

    0x0003 = From incoming calls list
    0x0150 = From network directory
    0x0153 = From incoming calls list+From network directory
    0x1000 = Manual dialing
    0x7557 = Always

    Is added to numbers: Select when the phone numbers should be automatically prefixed with the digits, e.g. when dialling from a call list or a directory.


    		Area Codes

    AreaCodes.0.Country

    Expand
    titleAreacodes
    Afghanistan
Albania
Algeria
American_samoa
Andorra
Angola
Anguilla
Antigua_and_barbuda
Argentina
Armenia
Aruba
Australia
Australian_external_territories
Austria
Azerbaijan
Bahamas
Bahrain
Bangladesh
Barbados
Belarus
Belgium
Belize
Benin
Bermuda
Bhutan
Bolivia_plurinational_state_of
Bonaire_sint_eustatius_and_saba
Bosnia_and_herzegovina
Botswana
Brazil
British_virgin_islands
Brunei_darussalam
Bulgaria
Burkina_faso
Burundi
Cambodia_telecom_cambodia
Cambodia_royal_telecom_international
Cameroon
Canada
Cape_verde
Cayman_islands
Central_african_rep
Chad
Chile_claro_chile
Chile_vtr_chile
Chile_convergia_chile
Chile_transam
Chile_enewcarriercom_chile
Chile_empresa_de_telecomunicaciones_netonone
Chile_heilsberg
Chile_concert_chile
Chile_globus
Chile_telefonica_del_sur
Chile_gtd_manquehue
Chile_entel_larga_distancia
Chile_gsp_chile
Chile_equant_chile
Chile_sur_telecomunicaciones
Chile_astro
Chile_stelchile_sa
Chile_micarrier_telecomunicaciones
Chile_fibersat
Chile_carrier_169
Chile_impsat_chile
Chile_global_crossing
Chile_netchile
Chile_emplressa_de_transporte_de_senales
Chile_hogar_de_cristo
Chile_movistart
Chile_telefonica_ctc
China
Colombia_movistar
Colombia_etb
Colombia_une_epm
Comoros
Congo
Cook_islands
Costa_rica
Cote_divoire
Croatia
Cuba
Curacao
Cyprus
Czech_republic
Dem_peoples_rep_of_korea
Dem_rep_of_the_congo
Denmark
Diego_garcia
Djibouti
Dominica
Dominican_rep
Ecuador
Egypt
El_salvador
Equatorial_guinea
Eritrea
Estonia
Ethiopia
Falkland_islands_malvinas
Faroe_islands
Fiji
Finland
France
French_departments_and_territories_in_the_indian_ocean
French_guiana
French_polynesia
Gabon
Gambia
Georgia
Germany
Ghana
Gibraltar
Greece
Greenland
Grenada
Guadeloupe
Guam
Guatemala
Guinea
Guineabissau
Guyana
Haiti
Honduras
Hong_kong_china
Hungary
Iceland
India
Indonesia_indosat
Indonesia_telcom
Indonesia_bakrie_telecom
Iran
Iraq
Ireland
Israel_kod_gisha
Israel_smile_tikshoret
Israel_netvision
Italy
Jamaica
Japan
Jordan
Kazakhstan
Kenya
Kiribati
Korea
Kuwait
Kyrgyzstan
Lao_pdr
Latvia
Lebanon
Lesotho
Liberia
Libya
Liechtenstein
Lithuania
Luxembourg
Macao_china
Madagascar
Malawi
Malaysia
Maldives
Mali
Malta
Marshall_islands
Martinique
Mauritania
Mauritius
Mexico
Micronesia
Moldova_republic_of
Monaco
Mongolia
Montenegro
Montserrat
Morocco
Mozambique
Myanmar
Namibia
Nauru
Nepal
Netherlands
New_caledonia
New_zealand
Nicaragua
Niger
Nigeria
Niue
Northern_marianas
Norway
Oman
Pakistan
Palau
Panama
Papua_new_guinea
Paraguay
Peru
Philippines
Poland
Portugal
Puerto_rico
Qatar
Romania
Russian_federation
Rwanda
Saint_helena_ascension_and_tristan_da_cunha
Saint_kitts_and_nevis
Saint_lucia
Saint_pierre_and_miquelon
Saint_vincent_and_the_grenadines
Samoa
San_marino
Sao_tome_and_principe
Saudi_arabia
Senegal
Serbia
Seychelles
Sierra_leone
Singapore
Sint_maarten
Slovakia
Slovenia
Solomon_islands
Somalia
South_africa
South_sudan
Spain
Sri_lanka
Sudan
Suriname
Swaziland
Sweden
Switzerland
Syrian_arab_republic
Taiwan_china
Tajikistan
Tanzania
Thailand
The_former_yugoslav_republic_of_macedonia
Timorleste
Togo
Tokelau
Tonga
Trinidad_and_tobago
Tunisia
Turkey
Turkmenistan
Turks_and_caicos_islands
Tuvalu
Uganda
Ukraine
United_arab_emirates
United_kingdom
United_states
United_states_virgin_islands
Uruguay
Uzbekistan
Vanuatu
Vatican
Venezuela_bolivarian_republic_of
Vietnam
Wallis_and_futuna
Yemen
Zambia
Zimbabwe

    Country: From the option menu select the country or region where your telephone system is to be used . . . the international and national prefix is then entered in the Prefix and Area code fields.


    		International

    AreaCodes.0.Int_Prefix

    		max. 4 digits, 0-9Prefix: Enter the prefix of the international area code.

    AreaCodes.0.Int_Code

    		max. 4 digits, 0-9Area code: Enter the international area code.

    		Local

    AreaCodes.0.Local_Prefix

    		max. 4 digits, 0 - 9Prefix: Enter the prefix of the local area code. These digits are placed in front of the local area code for national long-distance calls.

    AreaCodes.0.Local_Code

    		max. 8 digits, 0 - 9Area code: Enter the local area code for your town/city (depending on country/provider)
    AreaCodes.0.UseAreaCode

    0 = No
    1 = For local and national calls
    2 = For Local

    		Use area code:

    		Tone Selection

    Telephony.0.ToneScheme


    Expand
    titleToneScheme

    Austria
    Belgium
    Czech
    Denmark
    Finland
    France
    Germany
    Greece
    Retail
    Italy
    Netherlands
    Norway
    Poland
    Portugal
    RUSSIAN_FEDERATION
    Slovakia
    Slovenia
    Spain
    Sweden
    Switzerland
    Turkey
    UAE
    UK

    Tone scheme: Select the country or region whose ring tones are to be used for your phone from the option menu.

    Web-interface: Settings - Telephony - VoIP

    		SIP
    DmGlobal.0.PortRange: 1-65535; Default: 5060SIP port: Enter the SIP port used for VoIP connections.
    DmGlobal.0.TLS_PortRange: 1-65535; Default: 5061Secure SIP port: Enter the SIP port used for secure VoIP connections (TLS).
    dm.local.RtpBasePortDefault: 5004RTP port: Not available in the web-interface
    DmGlobal.0.Timers_T1Default: 500 msSIP timer T1: Enter the estimated round trip time of an IP packet between a SIP client and a SIP server (the time it takes between sending out the request to the point of getting a response).
    DmGlobal.0.Timers_SessionMax. 4 digits, min. 90 sec; Default: 1800 sec;SIP session timer: Defines a session expiry interval: If the session isn't refreshed within the interval, the session is released. Session refresh is started after half of the interval by a re-INVITE message, which the peer side has to confirm to get the session refreshed.
    DmGlobal.0.Timers_FailedRegistrationMax. 4 digits, min. 10 sec; Default: 300 sec;Failed registration retry timer: Specify after how many seconds the phone should attempt to reregister when the initial registration has failed.
    DmGlobal.0.Timers_SubscriptionDefault: 1800 sSubscription timer: Defines the expiration time (in seconds) of a subscription. In order to keep subscriptions effective, subscribers need to refresh subscriptions on a periodic basis.
    DmGlobal.0.PRACK0 = PRACK disabled
    1 = PRACK enabled    		PRACK: (Provisional Response Acknowledgement) SIP provisional responses do not have an acknowledgement system so they are not reliable. The PRACK method guarantees a reliable and ordered delivery of provisional responses in SIP.

    		Quality of Service (QoS)

    DmGlobal.0.QoS_SIP_DSCP

    		0 - 63SIP ToS / DiffServ: Enter your chosen QoS DiffServ class for SIP data packets.

    DmGlobal.0.QoS_RTP_DSCP

    		0 - 63RTP ToS / DiffServ: Enter your chosen QoS DiffServ class for RTP data packets.

    		XSI services
    XSIDir.1.ServerURL
    		Server address
    DmGlobal.0.XSINetdirs

    0 = Off
    1 = On

    		Enable XSI directories
    DmGlobal.0.XSICallLogs

    0 = Off
    1 = On

    		Enable XSI call logs
    XSIDir.1.Apicom.broadsoft.xsi-actions/v2.0Not in web-interface
    Web-interface: Settings - Online directories - Corporate

    		Access to LDAP server

    LDAPDir.0.DirName

    		Max. 20 charactersDirectory name: Enter a name in the field . This is the name under which the directory will be displayed on the handsets

    Netdir.<x>.Activated

    0 = LDAP 1, 7 = LDAP 2, 8 = LDAP 3, 9 = LDAP 4, 10 = LDAP 5, 11 = LDAP 6
    12 = LDAP 7, 13 = LDAP 8, 14 = LDAP 9, 15 = LDAP 10

    		0 = Off
    1 = On    		Enable directory:

    LDAPDir.0.ServerURL

    		IP address/ DNS nameServer address: Enter the URL of the LDAP server

    LDAPDir.0.ServerPort

    		1 - 65535 (Default: 389)Server port: Enter the port the LDAP server expects database requests

    LDAPDir.0.BaseDN

    		Default: 0, the search starts at the upper area of the LDAP database.Search base (BaseDN): The LDAP database is hierarchical in design. With the LDAP Search base (BaseDN) parameter, stipulate in which area the search should begin.

    LDAPDir.0.Username

    		max. 254 charactersUsername: Enter a global username for the user access to the LDAP director.

    LDAPDir.0.Password

    		max. 254 charactersPassword: Enter a global password for the user access to the LDAP directory.
    LDAPDir.0.TlsMode

    0 = Off
    1 =
    2 =

    		Secure LDAP:

    		Search in LDAP database

    LDAPDir.0.StartWithList

    		0 = Off
    1 = On

    Enable List mode: Define what should be initially shown, when the user opens the LDAP directory

    LDAPDir.0.NameFilter

    		(|(cn=%)(sn=%))Name filter: The name filter decides which attribute is used for the search.

    LDAPDir.0.NumberFilter

    		(|(telephoneNumber=%)(mobile=%))Number filter: The number filter stipulates the criteria for the automatic completion of telephone numbers.

    LDAPDir.0.AdditionalFilter1Name


    		Additional filter #1 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed.

    LDAPDir.0.AdditionalFilter1


    		Additional filter #1 value: Enter the value for the attribute entered in the corresponding name field.

    LDAPDir.0.AdditionalFilter2Name


    		Additional filter #2 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed.
    LDAPDir.0.AdditionalFilter2
    		Additional filter #2 value: Enter the value for the attribute entered in the corresponding name field.

    LDAPDir.0.DisplayName


    		Display format: In this field you can stipulate how the search result is to be displayed on the handset.

    LDAPDir.0.MaxNrOfSearchEntries

    		50Max. number of search results:

    		Configuration of directory items

    LDAPDir.0.ItemFN


    		First name

    LDAPDir.0.ItemLN


    		Surname

    LDAPDir.0.ItemPH


    		Phone (home)
    LDAPDir.0.ItemPO
    		Phone (office)
    LDAPDir.0.ItemPM
    		Phone (mobile)

    LDAPDir.0.ItemEM


    		E-mail

    LDAPDir.0.ItemFX


    		Fax

    LDAPDir.0.ItemCP


    		Company

    LDAPDir.0.ItemST


    		Street

    LDAPDir.0.ItemCT


    		City

    LDAPDir.0.ItemZP


    		Zip

    LDAPDir.0.ItemCO


    		Country

    LDAPDir.0.ItemAA


    		Additional attribute

    LDAPDir.0.IsAdditionalAttributeDialable

    		0 = Disabled
    1 = Enabled

    Web-interface: Settings - Online directories - XML

    		Public Directory via XML Protocol

    XMLDir.0.ProviderName

    		PublicDirectory name: Enter a name for the directory. This is the name that will be displayed on the handsets when the user opens the directory list by pressing the directory key.

    XMLDir.0.ServerURL


    		Server address: Enter the URL of the online directory provider.

    XMLDir.0.Username


    		Username: Enter a global user name for the user access to the online directory.

    XMLDir.0.Password


    		Password: Enter a global password for the user access to the online directory.
    XMLDir.0.EntCount

    0 = Disabled

    > 0 = Enabled

    List update / refresh:

    Maximum number of entries: Enter the maximum number of entries that are to be downloaded during one reading operation.

    XMLDir.0.NumbFilter

    1 = Office

    2 = Internal

    3 = Mobile

    4 = Home

    5 = Fax


    XMLDir.0.HsHasFilter


    		Public White Pages
    Netdir.4.Activated0 = Disabled
    1 = Enabled    		Enable Public White Pages: Mark the check box if you want to provide the White Pages of the given provider.

    XMLDir.0.WhitePagesDirName


    		Directory name

    XMLDir.0.StartWithListWP

    0 = Editor
    1 = List

    		Start mode

    		Public Yellow Pages
    Netdir.5.Activated0 = Disabled
    1 = Enabled    		Enable Public Yellow Pages

    XMLDir.0.YellowPagesDirName


    		Directory name

    XMLDir.0.StartWithListYP

    		0 = Editor
    1 = List    		Start mode

    		Public Private pages
    Netdir.6.Activated0 = Disabled
    1 = Enabled    		Enable Public Private Pages

    XMLDir.0.PrivatePagesDirName


    		Directory name

    XMLDir.0.StartWithListPP

    		0 = Editor
    1 = List    		Start mode

    		Corporate Directory via XML Protocol

    XMLDir.1.ProviderName


    		Directory name: Enter a name for the directory. This is the name that will be displayed on the handsets when the user opens the directory list by pressing the directory key.

    XMLDir.1.ServerURL


    		Server address: Enter the URL of the online directory provider.

    XMLDir.1.Username


    		Username: Enter a global user name for the user access to the online directory.
    XMLDir.1.Password
    		Password: Enter a global password for the user access to the online directory.
    XMLDir.1.EntCount

    0 = Disabled

    > 0 = Enabled

    List update / refresh:

    Maximum number of entries: Enter the maximum number of entries that are to be downloaded during one reading operation.

    XMLDir.1.NumbFilter

    1 = Office

    2 = Internal

    3 = Mobile

    4 = Home

    5 = Fax


    XMLDir.1.HsHasFilter


    		Corporate White Pages
    Netdir.1.Activated0 = Disabled
    1 = Enabled    		Enable White Pages: Mark the check box if you want to provide the White Pages of the given provider.
    XMLDir.1.WhitePagesDirName
    		Directory name: Enter a name for the directory. This is the name that will be displayed on the handsets when the user opens the directory list by pressing the directory key.
    XMLDir.1.StartWithListWP0 = Editor
    1 = List    		Start mode

    		Corporate Yellow Pages
    Netdir.2.Activated0 = Disabled
    1 = Enabled    		Enable Yellow Pages: Mark the check box if you want to provide the Yellow Pages of the given provider.
    XMLDir.1.YellowPagesDirName
    		Directory name:Enter a name for the directory. This is the name that will be displayed on the handsets when the user opens the directory list by pressing the directory key.
    XMLDir.1.StartWithListYP0 = Editor
    1 = List    		Start mode

    		Corporate Private Pages
    Netdir.3.Activated0 = Disabled
    1 = Enabled    		Enable Private Pages: Mark the check box if you want to provide the Yellow Pages of the given provider.
    XMLDir.1.PrivatePagesDirName
    		Directory name:Enter a name for the directory. This is the name that will be displayed on the handsets when the user opens the directory list by pressing the directory key.
    XMLDir.1.StartWithListPP0 = Editor
    1 = List    		Start mode
    Web-interface: Settings - Online directories - XSI

    		XSI directory
    DmGlobal.XSINetdirs

    0 = Disabled
    1 = Enabled

    		Enable XSI directories
    XSIDir.1.StartWithList0 = Off
    1 = On

    		XSI Personal directory
    Netdir.20.Activated
    		Enable Personal directory
    XSIDir.1.PDirName
    		Directory name

    		XSI Group directory
    Netdir.18.Activated
    		Enable Corporate Yellow Pages
    XSIDir.1.GDirName
    		Directory name

    		XSI Group Common directory
    Netdir.19.Activated
    		Enable Corporate Private Pages
    XSIDir.1.GCDirName
    		Directory name

    XSI Enterprise directory

    Netdir.16.Activated
    		Enable Corporate Private Pages
    XSIDir.1.EDirName
    		Directory name

    XSI Enterprise Common directory

    Netdir.17.Activated
    		Enable Corporate Private Pages
    XSIDir.1.ECDirName
    		Directory name
    Web-interface: Settings - Online Services - Central phonebook
    Netdir.21.Activated0: disabled
    1: enabled    		Enabled directory
    CentralBook.0.Name
    		Directory name
    CentralBook.0.ServerURL
    		Server address
    CentralBook.0.DownloadTime14:00Daily refresh time
    CentralBook.0.StartWithList0: No
    1: Yes    		Enable list mode
    CentralBook.0.MaxSearchResult99Maximum results for central phone-book search
    CentralBook.0.Username 

    CentralBook.0.Password

    Web-interface: Settings - Online Services - XHTML
    RapService.< 3-6>.Activated0: disabled
    1: enabled    		Activate
    RapService.< 3-6>.Name
    		Name for menu
    RapService.< 3-6>.SoftkeyName
    		Name for Softkey
    RapService.< 3-6>.ServerURL
    		Server address
    RapService.< 3-6>.UseSIP0: No
    1: Yes    		Use SIP credentials
    RapService.< 3-6>.Username
    		Username
    RapService.< 3-6>.Password
    		Password
    RapService.< 3-6>.CallConfirm

    DmGlobal.0.AddSipId0: No
    1: Yes    		Add SipId
    Web-interface: Settings - System - Web configurator

    		Change password
    WebUIAccounts.1.Password
    		Change Password > New password (Admin)

    		CLI access via ssh
    DmGlobal.0.CliPassword

    CLI Password (Admin): Enter a password for the administrator access to the configuration via SSH. Value: min. 8, max. 74 characters


    		User login
    WebUIAccounts.2.Active0 = deactivated (default)
    1 = activated    		Activate / deactivate Web configurator User login
    WebUIAccounts.2.Password
    		Add/Change Password User
    Web-interface: Settings - System - Provisioning and configuration

    		Provisioning and configuration
    Provisioning.global.ProvisioningServermax. 255 characters

    Provisioning server: Enter the URL of your provisioning server in the text field.

    Provisioning.global.Period
    		Provisioning interval set in seconds
    example: every 24 hours is 86400
    Web-interface: Settings - System - Security

    		Certificates
    SystemSettings.global.Security_Certificates_AcceptAllCertificates

    0 = No
    1 = Yes

    		Accept all certificates: Mark the Yes radio button, If you want to accept all certificates.

    		HTTP Authentication
    Security.global.HTTPAuthUsernameMax. 74 charactersHTTP Authentication: Enter the user name for HTTP authentication.

    Security.global.HTTPAuthPassword

    		Max. 74 charactersHTTP Authentication: Enter the password for HTTP authentication
    Web-interface: Settings - System - System log

    dm.<DM id>.SysLogEnable

    "DM id", you can see in the web-interface:

    • local (dm.local.SysLogEnable)
    • dm1 (dm.dm1.SysLogEnable)
    • dm..
    • @ for all DECT managers (dm.@.SysLogEnable)
    		0: Off
    1: On

    Activate system log:

    dm.local.SysLogServer

    dm.@.SysLogServer

    		max. 240 charactersServer address: Enter the IP address or the (fully qualified) DNS name of your Syslog server. Value:

    dm.local.SysLogServerPort

    dm.@.SysLogServerPort

    		Range: 1-65535; Default: 514Server port: Enter the port number, where the Syslog server expects to receive requests.

    dm.local.SysLogProtocol

    dm.@.SysLogProtocol

    tcp

    udp

    SyslogProtocol

    In software 2.36 this setting can't be changed via provisioning, this will be changed.

    dm.local.SysLogTlsEnable

    dm.@.SysLogTlsEnable

    		0: Off
    1: On

    SystemSettings.global.DebugLevelMask

    		DWEID = debug
    W = warning
    E = error
    I = info
    Not possible via provisioning
    		SNMP manager address: Enter the IP address of the SNMP manger.
    Not possible via provisioning
    		SNMP manager port: Enter the port number
    Web-interface: Settings - System - Date and time

    		Date and time
    DmGlobal.0.NtpServer

    0.europe.pool.ntp.org,1.europe.pool.ntp.org,

    2.europe.pool.ntp.org,3.europe.pool.ntp.org

    Time server: There are some common time servers preset in the field. Enter your preferred time server in the text field. Multiple time servers can be entered separated by commas. Value: max. 255 characters

    DmGlobal.0.TimeZone
    Expand
    titleTimezones
    value="Pacific/Midway"
    value="Pacific/Niue"
    value="Pacific/Pago_Pago"
    value="Pacific/Samoa"
    value="Pacific/Honolulu"
    value="Pacific/Johnston"
    value="Pacific/Rarotonga"
    value="Pacific/Tahiti"
    value="Pacific/Marquesas"
value="America/Anchorage"
    Pacific/Gambier"
value="America/Los_Angeles"
    Pacific/Pitcairn"
value="America/Denver"
value="America/Chicago"
    Pacific/Easter
    Pacific/Galapagos"
value="America/New_York"
value="America/Caracas"
value="America/Sao_Paulo"
value="Europe/Belfast"
value="Europe/Dublin"
value="Europe/Guernsey"
value="Europe/Isle_of_Man"
value="Europe/Jersey"
value="Europe/Lisbon"
value="Europe/London"
value="Greenwich"
value="Europe/Amsterdam"
value="Europe/Andorra"
value="Europe/Belgrade"
value="Europe/Berlin"
value="Europe/Bratislava"
value="Europe/Brussels"
value="Europe/Budapest"
value="Europe/Busingen"
value="Europe/Copenhagen"
value="Europe/Gibraltar"
value="Europe/Ljubljana"
value="Europe/Luxembourg"
value="Europe/Madrid"
value="Europe/Malta"
value="Europe/Monaco"
value="Europe/Oslo"
value="Europe/Paris"
value="Europe/Podgorica"
value="Europe/Prague"
value="Europe/Rome"
value="Europe/San_Marino"
value="Europe/Sarajevo"
value="Europe/Skopje"
value="Europe/Stockholm"
value="Europe/Tirane"
value="Europe/Vaduz"
value="Europe/Vatican"
value="Europe/Vienna"
value="Europe/Warsaw"
value="Europe/Zagreb"
value="Europe/Zurich"
value="Africa/Cairo"
value="Europe/Athens"
value="Europe/Bucharest"
value="Europe/Chisinau"
value="Europe/Helsinki"
value="Europe/Kaliningrad"
value="Europe/Kiev"
value="Europe/Mariehamn"
value="Europe/Nicosia"
value="Europe/Riga"
value="Europe/Sofia"
value="Europe/Tallinn"
value="Europe/Tiraspol"
value="Europe/Uzhgorod"
value="Europe/Vilnius"
value="Europe/Zaporozhye"
value="Europe/Istanbul"
value="Europe/Kirov"
value="Europe/Minsk"
value="Europe/Moscow"
value="Europe/Simferopol"
value="Europe/Volgograd"
value="Asia/Dubai"
value="Europe/Astrakhan"
value="Europe/Samara"
value="Europe/Ulyanovsk"
value="Asia/Karachi"
value="Asia/Dhaka"
value="Asia/Hong_Kong"
value="Asia/Tokyo"
value="Australia/Adelaide"
value="Australia/Darwin"
value="Australia/Brisbane"
value="Australia/Sydney"
value="Pacific/Noumea"

    Time Zone:

    DmGlobal.0.NtpEnableLocalServer

    		0 = No
    1 = Yes    		Act as Local Time Server: In case the internet time servers are not available you can set the time manually.
    Web-interface: Settings - System - Firmware

    		System firmware

    FwUpdateUrl

    must be placed in <oper.. see wiki


    		URL to firmware file: In the text field specify the URL of the configuration server where the firmware is located 

    FwUpdateStart

    must be placed in <oper.. see wiki for an example

    		0 = Immediately
    Unix time stamp (See https://www.epochconverter.com/ )    		Planned schedule:
    Settings - System - DECT settings

    		Eco DECT
    DmGlobal.0.DECTEcoMode

    0 = Maximum range
    1 = Limited range

    DECT Radiation power: Set the DECT radiation power to your needs:


    		DECT security settings
    DmGlobal.0.DECTCipherDisable

    0 = Activate
    1 = Deactivate

    DECT Encryption: Activate/deactivate the option.

    DmGlobal.0.DECTEnhancedEncryption

    0 = Deactivate
    1 = Activate

    Enhanced Security - Early Encryption and Re-Keying: Activate/deactivate the option

    DmGlobal.0.DECTReleaseUnencrypted0 = Deactivate
    1 = Activate

    Enhanced Security - Automatic release for non-encrypted calls: Activate/deactivate the option.


    		DECT Radio settings
    DmGlobal.0.SystemRegDomainEUR = Europa
    LAM = Latin America
    BRA = Brazil

    DECT Radio band: Select the radio frequency band used in your region.

    Hidden Parameters
    DmGlobal.0.bLedSignallingActive

    		0 = LED's off
    1 = LED's on    		Possibility to turn the LED's on the base Off or On.
    DmGlobal.EnableDFFlagForSipPackets

    Netdir.<x>.CachingType

    		For value x see: FAQ N870 - Directories number listLookup caching policy


    WebUI.1.Language