...

Table of Contents

Your device will start automatically as soon as it is connected to the mains power supply. Please be aware that if the device is powered by PoE (Power over Ethernet) it is supplied with power as soon as it is connected to an Ethernet switch with PoE-functionality.

Setting the language

• On the Start screen tap on  to open the list of available apps. -> Select Setting
• Scroll down and select   Language & input ->Tap on Language -> Select your desired language.

Registering the handset (DECT)

If you use a DECT handset you need to register it on the phone. 
Install the handset as described in the Installation Guide and place it in the cradle in order to charge the battery.
On the Start screen tap on  to open the list of available apps. ->  Select  Settings.

...

Establishing a connection to the local network

Your phone must be connected to the local network before it can connect to a phone system or the Internet and before you can operate it from a PC. You can connect the phone to the local network via Ethernet or Wi-Fi.

Connecting via Ethernet

• Make sure that the phone's LAN port  is connected to an Ethernet switch/router by an Ethernet cable. 
• On the Start screen tap on  to open the list of available apps. -> Select  Settings.
• Select   Ethernet -> Drag switch by Ethernet to the right to switch on Ethernet function.

...

Connecting via Wi-Fi

• On the Start screen tap on  to open the list of available apps. -> Select  Settings.
• Select   Wi-Fi -> Drag switch by Wi-Fi to the right to switch on Wi-Fi function.
• Please be sure to switch off Ethernet to be able to get a WiFi connection!

 
The phone attempts to connect with a Wi-Fi in range. Once a connection has been established, you will see the Wi-Fi icon in the toolbar. It displays the signal strength.
A list of Wi-Fis in range of your phone is displayed. An icon indicates the signal strength. Secure networks are identified with a lock icon.

...