Due to planned upgrade JIRA/Confluence may not be available on 30th October 2021 from 10am to 6pm CEST,
In case of any questions please don't hesitate to contact helpdesk@gigaset-devnet.pl

Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Column
width70%

1.0 Introduction

Doorintercom systems with video or Camera's that generate JPG pictures (IP security camera) can be used as screensaver on the Gigaset DE900/700 devices. In Idle mode after 15 seconds, the devices can show the jpg picture of the camera, it will be refreshed every xx seconds.

1.1 Configure WEB-Camera in DE device

 

First you need to configure the Webcamera in the DE900/700 devices.

Open the web-interface of the DE900/700, go to: Settings - Services - IP Info Services - Webcam

  1. Name of webcam: Enter the name of the Camera
  2. IP address of webcam (URL): The URL to the Camera picture: Example: http://192.168.178.69/video.jpg

Press Add and then Save to store the settings.

 

On the same web-interface page, set the options:

  • Activate Info Services: Yes
  • Webcam: Select the web-camera you would like to show.

 

 

 

 

 

 

 

 

 

1.2 Set info service as screensaver.

 

Go to: Settings - Display

  • Screensaver: Select "Info Service"

 




 

 

Info
titleWireshark trace

Every 300 ms, the device will load the picture from the camera.

238 0.315276000 192.168.178.36 192.168.178.69 HTTP 193 GET /video.jpg HTTP/1.0 

GET /video.jpg HTTP/1.0
Host: 192.168.178.69
User-Agent: DE900 IP PRO/60.00.02.00.08;7C2F80081897
Full request URI: http://192.168.178.69/video.jpg
Connection: keep-alive

 

Column
width30%

Table of Contents